"Technology always comes from human nature", human nature is to control everything. As we know smartphones allow people to master, see-through information, and touch our thoughts, which completely changes people's habits and also people enjoy dominance and pleasure.

Buttons in the past, touch panels today; in the past CRT, and LCD today are bright and dazzling self-emitting OLED, no electronic radiation, no backlight; a green and environmentally friendly communication technology - TP OLED.

Touch panels (TP) can be divided into resistive touch panels (RTP) and capacitive touch panels (CTP) based on electrical characteristics. Winstar OLED touch solutions are mainly based on capacitive touch panels (CTP) as shown in Figure 1 below as reference.

TP-OLED modules are divided into two categories, one is external touch panel module, and the other is in-cell touch module (as shown in Figure 2). External touch panel solution refers to a touch panel module attached to the existing OLED panel. The advantages of those modules are that there is no need to change the OLED panel design, no need to change the manufacturing process, no need to make a fixture, save the change cost, and can widely apply to the existing various sizes, to fulfill customer's request for Touch OLED modules.

The bonding process of attaching an external touch panel to the OLED panel is divided into two types: Air-bonding and Direct / Optical-Bonding. The former one has a simpler bonding process, which can be easily attached to various types of OLED panels and has a lower price. The optical-bonding process is more rigorous, using OCA (Optical Clear Adhesive) to bond the touch panel with the OLED panel, the bonding strength is much increased, and the boundary between the display area and the non-display area is not obvious, and the panel's light transmittance and stereopsis can be enhanced. There are obvious visual differences between the two types of lamination modules. This is because there is an air layer in the air-bonding touch panel lens and the OLED panel (as shown in Figure 3).

Taking Winstar 1.54" TP-OLED module (WEO012864AWPP3A00000) as an example, the visual effect of optical bonding is quite good as shown in Figure 4.

In-cell TP-OLED module design, the driver IC is built-in with a touch circuit design and a display circuit design, called TDDI (Touch with Display Driver IC). Compared with the external TP-OLED module, the in-cell TP-OLED module has the advantages of lightness and thinness, saving film and adhesive, and has advantages in cost. The simple design structure helps simplify the circuit design and shorten the development process. Take Winstar 0.91" in-cell TP-OLED module WEO012832MWAP3J00000 as an example (as shown in Figure 5), the visual effect of optical bonding is quite good on module.

Winstar offers a wide range of TP-OLED touch solutions for different product applications to customers. These TP-OLED can be applied to markets such as wearable devices, smart home equipment, meters, and industrial control panels to meet customer needs. Please refer to the below table 1 of Winstar touch solution module list.