10.2 Inch Wide Temperature TFT LCD Display, 800x480

Model No. WF102ATNAGDNN0

►Size : 10.2”
►Resolution : 800 x 480 pixels
►View Direction : 12H
►Interface : --
►Driver IC : --
►Control-Board : No
►Brightness (cd/m²): 350
►Frame Through Hole : No
►Touch Screen : No
►Operating Temperature : -30~+85°C (Wide Temperature)

DATASHEET

DEMO CODE

ADD TO INQUIRY

BACK to LIST NEXT

Description

WF102ATNAGDNN0 is a 10.2-inch wide-temperature TFT LCD display module with an 800×480 pixel resolution and a 16:9 aspect ratio. The module measures 235.0 × 145.8 × 6.1 mm and features an active area of 222.0 × 132.48 mm.

This TFT LCD module adopts a transmissive, normally white display mode and provides a typical brightness of 350 cd/m². It features a 12 o’clock viewing direction, an anti-glare surface treatment, and is designed without a touch panel.

With an operating temperature range of -30℃ to +85℃ and a storage temperature range of -30℃ to +85℃, this 10.2-inch TFT LCD display is suitable for industrial equipment, embedded systems, control panels, and other HMI applications requiring stable operation in demanding environments.

DRAWING

SPECIFICATIONS

General Specifications

Item	Dimension	Unit
Size	10.2	inch
Dot Matrix	800 × RGB × 480 (TFT)	dots
Module dimension	235 × 145.8 × 6.1	mm
Active area	222 × 132.48	mm
Dot pitch	0.0925 × 0.2775	mm
LCD type	TFT, Normally White, Transmissive
View Direction	12 o'clock
Gray Scale Inversion Direction	6 o'clock
Aspect Ratio	16:9
Backlight Type	LED, Normally White
Touch Panel	Without touch panel
Surface	Anti-Glare

Absolute Maximum Ratings

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-30	－	+85	℃
Storage Temperature	TST	-30	－	+85	℃

Electrical Characteristics

Item	Symbol	Values			Unit
Item	Symbol	Min.	Typ.	Max	Unit
Power voltage	VCC	3.0	3.3	3.6	V
	AVDD	9.0	9.2	9.4	V
	VGH	15.3	16.0	16.7	V
	VGL	-7.7	-7.7	-6.3	V
Input signal voltage	VCOM	3.65	3.85	4.05	V
	V1~V7	0.4AVDD	-	AVDD-0.1	V
	V8~V14	0.1	-	0.6 AVDD	V
Ripple voltage	VRP	-	-	150	mV
Input logic high voltage	VIH	0.7 VCC	-	VCC	V
Input logic low voltage	VIL	0	-	0.3 VCC	V

Interface

TFT LCD Panel Driving Section

Pin No.	Symbol	I/O	Function
1	POL	I	Polarity selection
2	STVD	I/O	Vertical start pulse input when U/D= H
3	OEV	I	Output enable
4	CKV	I	Vertical clock
5	STVU	I/O	Vertical start pulse input when U/D= L
6	GND	P	Power ground
7	EDGSL	I	Select rising edge or rising/falling edge
8	VCC	P	Power supply for digital circuit
9	V9	I	Gamma voltage level 9
10	VGL	P	Gate OFF voltage
11	V2	I	Gamma voltage level 2
12	VGH	P	Gate ON voltage
13	V6	I	Gamma voltage level 6
14	U/D	I	Up/down selection
15	VCOM	I	Common voltage
16	GND	P	Power ground
17	AVDD	P	Power supply for analog circuit
18	V14	I	Gamma voltage level 14
19	V11	I	Gamma voltage level 11
20	V8	I	Gamma voltage level 8
21	V5	I	Gamma voltage level 5
22	V3	I	Gamma voltage level 3
23	GND	P	Power ground
24	R5	I	Red data(MSB)
25	R4	I	Red data
26	R3	I	Red data
27	R2	I	Red data
28	R1	I	Red data
29	R0	I	Red data(LSB)
30	GND	P	Power ground
31	GND	P	Power ground
32	G5	I	Green data(MSB)
33	G4	I	Green data
34	G3	I	Green data
35	G2	I	Green data
36	G1	I	Green data
37	G0	I	Green data(LSB)
38	STHL	I/O	Horizontal start pulse input when R/L = L
39	REV	P	Control signal are inverted or not
40	GND	I	Power ground
41	DCLK	I	Sample clock
42	VCC	P	Power supply for digital circuit
43	STHR	I/O	Horizontal start pulse input when R/L = H
44	LD	I	Latches the polarity of outputs and switches the new data to outputs
45	B5	I	Blue data (MSB)
46	B4	I	Blue data
47	B3	I	Blue data
48	B2	I	Blue data
49	B1	I	Blue data
50	B0	I	Blue data (LSB)
51	R/L	I	Right/ left selection
52	V1	I	Gamma voltage level 1
53	V4	I	Gamma voltage level 4
54	V7	I	Gamma voltage level 7
55	V10	I	Gamma voltage level 10
56	V12	I	Gamma voltage level 12
57	V13	I	Gamma voltage level 13
58	AVDD	P	Voltage for analog circuit
59	GND	P	Power ground
60	VCOM	I	Common voltage

I: input, O: output, P: Power

Backlight Unit Section

Pin No.	Symbol	I/O	Function	Remark
1	VLED+	P	Power for LED backlight anode	Red
2	VLED-	P	Power for LED backlight cathode	White