Home Products TFT Display IPS TFT LCD WF70A8TYAHLNGB

7-Inch 1024x600 IPS LVDS TFT LCD with Capacitive Touch Panel

Model No. WF70A8TYAHLNGB

►Size : 7 inch
►Resolution : 1024x600 dots
►View Direction : 85/85/85/85 (IPS)
►Interface : LVDS
►Driver IC:ST5021 + ST5651
►Control-Board : No
►Brightness(cd/m²) : 450
►Frame Through Hole : No
►Touch Screen : Projected Capacitive Touch Panel (PCAP)
►Detect Point : 5 Fingers

Description

WF70A8TYAHLNGB is a 7-inch landscape mode IPS TFT module with a Projected Capacitive Touch Panel, offering a resolution of 1024x600 pixels. The WF70A8 model is built with ST5021 and ST5651 driver ICs, supporting LVDS interfaces. It has a contrast ratio of 800:1 (typical value) and a brightness of 450 cd/m² (typical value). The module features a 16:9 aspect ratio, a glare surface glass, and a normally black, transmissive LCD type.

The Projected Capacitive Touch Panel of the WF70A8 is built with the ILI2130 IC, supporting I2C interface and 5-point touch. This 7" IPS TFT offers a wider viewing angle compared to TN TFT displays, with a typical viewing angle of Left: 85° / Right: 85° / Up: 85° / Down: 85°.

The supply voltage (VDD) of the WF70A8TYAHLNGB ranges from 3.0V to 3.6V, with a typical value of 3.3V. It can operate at temperatures from -20℃ to +70℃ and be stored at temperatures ranging from -30℃ to +80℃.

Additionally, we offer an optional larger cover glass (CG) for easier installation flexibility in various applications. For this, please refer to WF70A8TYAHLNGC.

DRAWING

7 inch1024x600 LVDS IPS PCAP TFT LCD Panel - WF70A8TYAHLNGB

SPECIFICATIONS

General Specifications

Item Dimension Unit
Size 7 inch
Dot Matrix 1024 × RGB × 600(TFT) dots
Module dimension 169.9(W) × 103.4(H) × 7.3(D) mm
Active area 154.2144 × 85.92 mm
Dot pitch 0.1506 × 0.1432 mm
LCD type TFT, Normally Black, Transmissive
View Direction 85/85/85/85
TFT Interface LVDS
Aspect Ratio 16:9
TFT Driver IC ST5021 + ST5651 or equivalent
Backlight Type LED, Normally White
PCAP IC ILI2130 or Equivalent
PCAP Interface I2C
PCAP FW Version 0x07.0x00.0x00.0x00.0x65.0x90.0x00.0x01
Touch Panel Projected Capacitive Touch Screen
Surface Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Item Symbol Values Unit
Min. Typ. Max.
Power voltage VDD 3.0 3.3 3.6 V
Supply PCAP VDDT 3.0 3.3 3.6 V
ICTP 65 98 mA
Analog Power AVDD 8.9 9.0 9.1 V
TFT Gate ON Voltage VGH 17 18 19 V
TFT Gate OFF Voltage VGL -6.5 -6.0 -5.5 V
TFT Common Voltage Vcom 3.0 3.15 3.3 V
Current for Driver IDD - 14 21 mA
Power Current IAVDD - 25 - mA
TFT Gate ON Current IVGH - 1 - mA
TFT Gate OFF Current IVGL - 1 - mA
TFT Common Current IVCOM - 1 - mA

Interface

LCM PIN Definition

Pin No. Symbol I/O Function
1 VCOM P Common Voltage
2 VDD P Digital circuit
3 VDD P Digital circuit
4 NC --- No connection
5 RESET I Global reset pin
6 STBYB   I Standby mode, Normally pulled high
STBYB = “1”, normal operation
STBYB = “0”, timing controller, source driver will turn off, all output are High-Z
7 GND P Ground
8 RXIN0- I Negative LVDS differential data input
9 RXIN0+ I Positive LVDS differential data input
10 GND P Ground
11 RXIN1- I Negative LVDS differential data input
12 RXIN1+ I Positive LVDS differential data input
13 GND P Ground
14 RXIN2- I Negative LVDS differential data input
15 RXIN2+ I Positive LVDS differential data input
16 GND P Ground
17 RXCLKIN- I Negative LVDS differential clock input
18 RXCLKIN+ I Positive LVDS differential clock input
19 GND P Ground
20 RXIN3- I Negative LVDS differential data input
21 RXIN3+ I Positive LVDS differential data input
22 GND P Ground
23 NC --- No connection
24 NC --- No connection
25 GND P Ground
26 NC --- No connection
27 NC --- No connection
28 SELB I 6bit/8bit mode select
H:6bit / L:8bit
29 AVDD P Power for Analog Circuit
30 GND P Ground
31 LED- P LED Cathode
32 LED- P LED Cathode
33 L/R I Horizontal inversion
34 U/D I Vertical inversion
35 VGL P Negative power for TFT
36 NC --- No connection
37 NC --- No connection
38 VGH P Positive power for TFT
39 LED+ P LED Anode
40 LED+ P LED Anode

I:input ,O:output,P:power

PCAP PIN Definition

Pin Symbol Function
1 VSS Ground for analog circuit
2 VDDT Power Supply : +3.3V
3 SCL I2C clock input
4 NC No connect
5 SDA I2C data input and output
6 NC No connect
7 /RST External Reset, Low is active
8 NC No connect
9 /INT External interrupt to the host
10 VSS Ground for analog circuit
go top
close

We value your privacy

By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.

We value your privacy

Winstar and certain third parties use cookies on www.winstar.com.tw. The details regarding the types of
cookies, their purpose and the third parties involved are described below and in our Cookie Policy.
Please click on “Allow All” to consent to our usage of cookies in order to have the best possible
experience on our websites. You can also set your preferences or reject cookies (except for strictly
necessary cookies).

Manage Consent Preferences

Always Active
Essential Cookies

These cookies are essential in order to enable you to move around the website and use its
features, such as setting your privacy preferences, logging in or filling in forms.

Analytics Cookies

Also known as “statistics cookies,” these cookies collect information about how you use a website, like which pages you visited and which links you clicked on. See Detail