Model No. WF39DTLFSDHN0
►Size: 3.9"
►Resolution : 480x128 dots
►View Direction : 6H
►Interface : Support HDMI Connector (Only DVI Signal)
►Controller IC : TFP401
►Control-Board : Yes
►Brightness(cd/m2): 500
►Frame Through Hole: No
►Touch Screen : No
►Operating Temperature : -20~+70℃
The WF39DTLFSDHN0 is a 3.9-inch 480x128 Bar Type TFT-LCD display module with a built-in controller board featuring the TFP401 HDMI/DVI Decoder IC. It supports DVI signal input and is compatible with the Raspberry Pi series. This module offers a brightness of 500 nits, a contrast ratio of 500:1, a viewing direction of 6 o'clock (bottom view), a gray scale inversion direction of 12 o'clock, and an anti-glare surface glass. It operates within a temperature range of -20°C to +70°C and can be stored at temperatures ranging from -30°C to +80°C.
This 3.9-inch widescreen Bar Type TFT-LCD delivers high brightness and vibrant color performance, making it ideal for server systems, audio equipment, automotive/aviation/marine devices, security systems, industrial equipment, outdoor intercom systems and control panels, medical devices, and other applications.
| Item | Dimension | Unit |
|---|---|---|
| Size | 3.9 | inch |
| Dot Matrix | 480 × 128 × RGB | dots |
| Module dimension | 125.0 × 66.5 × 11.80 (Max) | mm |
| Active area | 95.04 × 25.34 | mm |
| Dot pitch | 0.198(H) × 0.198(V) | mm |
| LCD type | TFT, Normally White, Transmissive | |
| View Direction | 6 o'clock | |
| Gray Scale Inversion Direction | 12 o'clock | |
| Aspect Ratio | Bar Type | |
| Backlight Type | LED,Normally White | |
| Controller IC | TFP401 | |
| Interface | HDMI(only for DVI) | |
| With /Without TP | Without Touch Panel | |
| Surface | Anti-Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
| Item | Symbol | Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage For LCM | VDD | － | － | 5 | － | V |
| Supply Current For LCM | IDD | － | － | 250 | 400 | mA |
| LED life time | － | － | － | 50,000 | － | Hr |
| Pin No. | Symbol | I/O | Function |
|---|---|---|---|
| 1 | Rx2+ | I | Channel-2 positive receiver input; low-voltage signal differential- input pair. |
| 2 | GND | P | Ground |
| 3 | Rx2- | I | Channel-2 negative receiver input; low-voltage signal differential- input pair. |
| 4 | Rx1+ | I | Channel-1 positive receiver input; low-voltage signal differential- input pair. |
| 5 | GND | P | Ground |
| 6 | Rx1- | I | Channel-1 negative receiver input; low-voltage signal differential- input pair. |
| 7 | Rx0+ | I | Channel-0 positive receiver input; low-voltage signal differential- input pair. |
| 8 | GND | P | Ground |
| 9 | Rx0- | I | Channel-0 negative receiver input; low-voltage signal differential- input pair. |
| 10 | RxC+ | I | Clock positive receiver input; low-voltage signal differential- input pair. |
| 11 | GND | P | Ground |
| 12 | RxC- | I | Clock negative receiver input; low-voltage signal differential- input pair. |
| 13-16 | NC | - | No connection |
| 17 | GND | P | Ground |
| 18 | 5V | P | Power Supply |
| 19 | Delect | - | Delect |
I: input, O: output, P: Power
Note 1: Only supports Raspberry Pi series
| Pin No. | Symbol | I/O | Function |
|---|---|---|---|
| 1 | 5V | P | Power Supply |
| 2 | NC | - | No connection |
| 3 | NC | - | No connection |
| 4 | NC | - | No connection |
| 5 | GND | P | Ground |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.
