Model No. WFN1330A2S0YAENB000
►Size : 13.3"
►Resolution : 1920x1080 pixels
►View Direction : IPS
►Interface : eDP
►Driver IC : TC2055D
►Control-Board : No
►Brightness(cd/m²) : 850
►Frame Through Hole : No
►Touch Screen : Projected Capacitive Touch Panel (PCAP)
►Detect Point : 10 Fingers
►Operating Temperature : -20~+70℃
The WFN1330A2S0YAENB000 13.3-inch Full HD IPS TFT LCD module features a LED backlight with a typical luminance of 800~850 cd/m². It has a normally black, transmissive IPS TFT panel with a 1920×1080 resolution and wide 85° viewing angles in all directions.
The display uses an eDP interface for high-speed, low-noise signal transmission. It is driven by the TFT driver IC TC2055D and operates with a 3.3V logic power supply, with defined operating and LED driving conditions to support reliable electrical integration.
The module integrates a projected capacitive touch panel (PCAP) with up to 10-point multi-touch detection, driven by the ILI2511 controller or equivalent. Touch communication is supported via USB interface, with I²C available for system flexibility.
The module supports an operating temperature range of –20°C to +70°C and uses an LED backlight rated for up to 50,000 hours. Detailed pin definitions for LCM, backlight, and CTP interfaces simplify integration.
This module is suitable for industrial control systems, electrical control panels, HVAC displays, and other industrial HMI applications.
If a touch panel and high brightness are not required, please consider the WFN1330A2T0YAENN000 model.
| Item | Dimension | Unit |
|---|---|---|
| Size | 13.3 | inch |
| Dot Matrix | 1920 x RGB x 1080 | dots |
| Module dimension | 328.34 x 203.44 x 16.1 | mm |
| Active area | 293.76 x 165.24 | mm |
| Pixel Pitch | 0.153 X 0.153 | mm |
| LCD type | TFT, Normally Black, Transmissive | |
| View Angle | 85/85/85/85 | |
| TFT Interface | eDP | |
| Backlight Type | LED ,Normally White | |
| CTP IC | ILI2511 or equivalent | |
| CTP Interface | USB (I2C available) | |
| CTP FW Version | 0x06.0x00.0x00.0x00. 0x00.0x00.0x00.0x00 | |
| CTP Resolution | 16384*16384 | |
| Touch Panel | Projected Capacitive Touch Panel (PCAP) | |
| Surface | Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
| Parameter | Symbol | Values | Unit | ||
|---|---|---|---|---|---|
| Min. | Typ. | Max. | |||
| Power supply input voltage | VDD | 3.0 | 3.3 | 3.6 | V |
| Power supply current | IDD | - | 450 | 675 | mA |
| Supply CTP | USB_VDD 5V | 4.5 | 5.0 | 5.5 | V |
| I VDD 5V | - | 96 | 144 | mA | |
| VDDT 3.3 | 3.0 | 3.3 | 3.6 | V | |
| IDDT 3.3 | 93 | 140 | mA | ||
| Parameter | Symbol | Min. | Typ. | Max. | Unit |
|---|---|---|---|---|---|
| LED current | ILED | - | 700 | - | mA |
| LED voltage | VLED+ | 16.2 | 18.0 | 19.8 | V |
| LED Life Time | - | 50,000 | - | - | Hr |
| Pin No | Symbol | Function |
|---|---|---|
| 1 | NC | No Connection |
| 2 | GND | Power Ground |
| 3 | LANE1-N | Complement Signal Link Lane 1 |
| 4 | LANE1-P | True Signal Line 1 |
| 5 | GND | Power Ground |
| 6 | LANE0-N | Complement Signal Link Lane 0 |
| 7 | LANE0-P | True Signal Line 0 |
| 8 | GND | Power Ground |
| 9 | AUX-CH-P | True Signal Auxiliary Ch. |
| 10 | AUX-CH-N | Complement Signal Auxiliary Ch. |
| 11 | GND | Power Ground |
| 12 | VDD | LCD Logic and Driver Power (3.3V) |
| 13 | VDD | LCD Logic and Driver Power (3.3V) |
| 14 | NC | No Connection |
| 15 | GND | Power Ground |
| 16 | GND | Power Ground |
| 17 | HPD | Hot plug detect output |
| 18 | GND | Power Ground |
| 19 | GND | Power Ground |
| 20 | GND | Power Ground |
| 21 | GND | Power Ground |
| 22-30 | NC | No Connection |
| Pin No. | Symbol | Description |
|---|---|---|
| 1 | VLED+ | Red, LED_ Anode |
| 2 | VLED- | Black, LED_ Cathode |
| Pin No. | Symbol | Function |
|---|---|---|
| 1 | USB_VSS | System ground |
| 2 | USB_VDD 5V | Power supply |
| 3 | USB_D+ | Data + |
| 4 | USB_D- | Data - |
| 5 | VSS | System ground |
| 6 | SDA | I2C data input and output |
| 7 | SCL | I2C clock input |
| 8 | RST | External Reset, Low is active |
| 9 | INT | External interrupt to the host |
| 10 | VDDT 3.3 | Power supply |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.
