Character STN type module doesn't have the appropriate letter in the Font Table; how to create my own CGRAM?
Generally speaking, the character pattern can be established using eight bits by configuring the CGRAM data.
Program are as follows:
Table:
Technology / FAQ
- User-Friendly STN LCD Control Interface
- An introduction to wide viewing angle display for VATN-LCD
- Cost-Effective and Reliable Displays with Professional Backlight Module Design Solution
- ICON Touch - Building a New touch-and-High-value STN display
- Impact of COVID-19 Epidemic – IC Shortage
- VATN LCD Introduction
- Can I use 5V to light the backlight?
- Character type: What if I want to use VEE and turn on the backlight from PIN15 and PIN16?
- How to make the backlight power "ON" while the module turns ON? How to make the JUMPS, and are any limitations?
- Character STN type module doesn't have the appropriate letter in the Font Table; how to create my own CGRAM?
- The controller is 7920 IC. What are the pins defined when it is working on SPI mode?
- I want to use my own VEE, but the module I choose is without VEE. How can I decide the VEE value? How to connect it?
- After installing the module, the contrast is not good enough. There is no VR on the module to control the contrast. How to adjust it?
- How to control the module's contrast?
- What should I do with the garbled screen on startup for LCD character modules?
- If the character module doesn't work, how to make it functional?
