10.1" 1024x600 LVDS IPS TFT Display

Model No. WF101JTYAHLNN0

►Size : 10.1 inch
►Resolution : 1024×600 dots
►View Direction : IPS
►Interface : LVDS
►Driver IC : EK79001HN + EK73215BCGA
►Control-Board : No
►Brightness(cd/m2) : 500
►Frame Through Hole : No
►Touch Screen : No


WF101JTYAHLNN0 is a landscape mode 10.1 inch IPS TFT LCD module, it featured with resolution 1024x600 pixels. WF101JTYAHLNN0 is built in with EK79001HN and EK73215BCGA driver ICs, it supports LVDS interface, contrast ratio 800 (typical value), brightness 500 nits (typical value), aspect ratio 16:9, anti-glare surface glass, normally black, transmissive LCD type. This 10.1" IPS TFT has a wider viewing angle than TN TFT, it's view angle is Left:85 / Right:85 / Up:85 / Down:85 degree (typical value).

The supply voltage (VDD) of WF101JSYAHLNN0 is from 3.0V to 3.6V, typical value 3.3V. It can be operating at temperatures from -20℃ to +70℃ and storage temperatures from -30℃ to +80℃. If customers require high brightness, please choose WF101JSYAHLNN0.


10.1 inch 1024x600 LVDS IPS TFT Display - WF101JTYAHLNN0



TFT LCD Module

Pin No. Symbol Description
1 VCOM Common voltage
2 VDD Digital power
3 VDD Digital power
4 NC Not connect
5 Reset Global reset pin. Active low to enter reset state. Suggest to connecting with an RC reset circuit for stability. Normally pull high. (R=10KΩ,C=1μF)
6 STBYB Standby mode, normally pull high STBYB=”1”, normal operation STBYB=”0”,timing control, source driver will turn off, all output are high-Z
7 GND Digital ground
8 RXIN0- Negative LVDS differential data inputs
9 RXIN0+ Positive LVDS differential data inputs
10 GND Digital ground
11 RXIN1- Negative LVDS differential data inputs
12 RXIN1+ Positive LVDS differential data inputs
13 GND Digital ground
14 RXIN2- Negative LVDS differential data inputs
15 RXIN2+ Positive LVDS differential data inputs
16 GND Digital ground
17 RXCLKN- Negative LVDS differential clock inputs
18 RXCLKN+ Positive LVDS differential clock inputs
19 GND Digital ground
20 RXIN3- Negative LVDS differential data inputs
21 RXIN3+ Positive LVDS differential data inputs
22 GND Digital ground
23 NC Not connect
24 NC Not connect
25 GND Digital ground
26 NC Not connect
27 NC Not connect
28 SELB 6-bit/8-bit input select SELB = L , 8-bit ; SELB = H , 6-bit
29 AVDD Analog power
30 GND Digital ground
31 LED- LED Cathode
32 LED- LED Cathode
33 L/R Left or right display control
34 U/D Up / down display control
35 VGL Negative power for TFT
36 NC Not connect
37 NC Not connect
38 VGH Positive power for TFT
39 LED+ LED Anode
40 LED+ LED Anode
When L/R=”0”,set right to left scan direction.
When L/R=”1”,set left to right scan direction.
When U/D=”0”,set top to bottom scan direction.
When U/D=”1”,set bottom to top scan direction.

General Specifications

Item Dimension Unit
Size 10.1 inch
Dot Matrix 1024 RGB x 600 dots
Module dimension 235(W) x 143(H) x 5.05(D) mm
Active area 222.72 (H) x 125.28(V) mm
Dot pitch 0.2175(W) x 0.2088(H) mm
LCD type TFT, Normally Black, Transmissive
Interface LVDS
Driver IC EK79001HN + EK73215BCGA or equivalent
Viewing Angle 85/85/85/85
Aspect Ratio 16:9
Backlight Type LED, Normally White
Touch Panel Without Touch Panel
Surface Anti-Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Typical Operation Conditions (At Ta = 25 °C,)

Item Symbol Min Typ Max Unit
Digital Power Supply Voltage For LCD VDD 3 3.3 3.6 V
Analog Power Supply Voltage AVDD 9.89 10.2 10.5 V
Gate On Power Supply Voltage VGH 19.4 20.0 20.6 V
Gate Off Power Supply Voltage VGL -10.3 -10.0 -9.7 V
Common Power Supply Voltage VCOM 4.0 4.3 4.6 V
Input logic high voltage VIH 0.7 VDD - VDD V
Input logic low voltage VIL 0 - 0.3 VDD V

Search keyword: tft 10.1", 10.1 tft lcd, 10.1" tft lcd, 10.1 inch tft lcd, tft lcd 10.1, 10.1 tft display, 10.1" tft display, 10.1 inch tft display, tft display 10.1", 10.1 tft lcd
go top