Model No. WF35LSIACDNT0
►Size : 3.5 inch
►Resolution : 320 x 240 dots
►View Direction : 12H
►Interface : RGB
►Driver IC : HX8238
►Control-Board : No
►Brightness(cd/m2) : 770
►Frame Through Hole : Option
►Touch Screen : Resistive Touch Panel
The WF35LSIACDNT0 is a high-brightness 3.5-inch resistive touchscreen TFT LCD display module, featuring a brightness of 770 nits (typical value). It delivers clear visibility in outdoor sunlight or various industrial environments. With a 350:1 (typical value) contrast ratio, it ensures stable and readable images under most lighting conditions. This display module offers a resolution of 320x240 pixels, providing sufficient clarity within the 3.5-inch screen area, making it ideal for portable devices. Whether used in field measurements, industrial operations, or other applications, the WF35LSIACDNT0 guarantees stable and reliable display performance.
The WF35LSIACDNT0 is equipped with the HX8238 driver IC and supports a 24-bit RGB interface, ensuring efficient and stable display performance.
Additionally, you can choose from the following models based on your requirements:
WF35LSIACDNN0: No touchscreen (1100 nits)
WF35LSIACDNT0: With resistive touchscreen (770 nits)
WF35LSIACDNG0: With capacitive touchscreen (880 nits)
The WF35LSIACDNT0 is the ideal display solution for outdoor and industrial environments, combining portability with high brightness and reliable performance, suitable for a wide range of portable devices.
The WF35LSIACDNT0 is the ideal display solution for outdoor and industrial environments, combining portability with high brightness and reliable performance, suitable for a wide range of portable devices.
| Item | Dimension | Unit |
|---|---|---|
| Size | 3.5 | inch |
| Dot Matrix | 320 × RGB × 240(TFT) | dots |
| Module dimension | 76.84 × 63.84 × 4.37 | mm |
| Active area | 70.08 × 52.56 | mm |
| Dot pitch | 0.073 × 0.219 | mm |
| LCD type | TFT, Normally White, Transmissive | |
| View Direction | 12 o'clock | |
| Gray Scale Inversion Direction | 6 o'clock | |
| TFT Driver IC | HX8238 or Equivalent | |
| TFT Interface | 24-bit RGB or option other mode | |
| Aspect Ratio | 4:3 | |
| Backlight Type | LED, Normally White | |
| Touch Panel | Resistive touch panel (RTP) | |
| Surface | Anti-Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
| Item | Symbol | Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage For LCM | VCC | － | 3.0 | 3.3 | 3.6 | V |
| Supply Current For LCM | ICC | － | — | 8.6 | 15 | mA |
| Pin | Symbol | Function |
|---|---|---|
| 1 | LED- | Power for LED backlight cathode |
| 2 | LED- | Power for LED backlight cathode |
| 3 | LED+ | Power for LED backlight anode |
| 4 | LED+ | Power for LED backlight anode |
| 5 | YU | Top electrode |
| 6 | XL | Left electrode |
| 7 | NC | No connect |
| 8 | /RESET | Hardware reset |
| 9 | SPENA | Chip select pin of serial interface |
| 10 | SPCLK | Clock pin of serial interface (SPCK) |
| 11 | SPDAT | Data input pin in serial mode(SPDA) |
| 12 | B0 | Data bus |
| 13 | B1 | Data bus |
| 14 | B2 | Data bus |
| 15 | B3 | Data bus |
| 16 | B4 | Data bus |
| 17 | B5 | Data bus |
| 18 | B6 | Data bus |
| 19 | B7 | Data bus |
| 20 | G0 | Data bus |
| 21 | G1 | Data bus |
| 22 | G2 | Data bus |
| 23 | G3 | Data bus |
| 24 | G4 | Data bus |
| 25 | G5 | Data bus |
| 26 | G6 | Data bus |
| 27 | G7 | Data bus |
| 28 | R0 | Data bus |
| 29 | R1 | Data bus |
| 30 | R2 | Data bus |
| 31 | R3 | Data bus |
| 32 | R4 | Data bus |
| 33 | R5 | Data bus |
| 34 | R6 | Data bus |
| 35 | R7 | Data bus |
| 36 | HSYNC | Line synchronization signal |
| 37 | VSYNC | Frame synchronization signal |
| 38 | DCLK | Dot-clock signal and oscillator source |
| 39 | NC | No connect |
| 40 | NC | No connect |
| 41 | VCC | Power Supply |
| 42 | VCC | Power Supply |
| 43 | YD | Bottom electrode |
| 44 | XR | Right electrode |
| 45 | NC | No connect |
| 46 | NC | No connect |
| 47 | NC | No connect |
| 48 | SEL2 | Input pin to select input interface mode |
| 49 | SEL1 | Input pin to select input interface mode |
| 50 | SEL0 | Input pin to select input interface mode |
| 51 | NC | No connect |
| 52 | DE | Display enable pin from controller. Internal pull high Connect to VCCIO or floating if not used |
| 53 | DGND | System ground pin of the IC. Connect to system ground. |
| 54 | AVSS | Grounding for analog circuit Connect to system ground |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.
