Home Products TFT LCD All in One TFT LCD Display WF70MTIBGDRN0

7" Clever System TFT LCD


►Size : 7”
►Resolution : 800x480 dots
►View Direction : 12H
►Interface : UART/SPI
►Built-in Controller : STM32
►Control-Board : Yes
►Brightness(cd/m2) : 460
►Frame Through Hole : Yes
►Touch Screen : Without touch screen
►Development board optional:
--For test function
--Dimension: 37 x 50 x12 mm
--USB input


WF70MTIBGDRN0 is a 7 inch M Series TFT-LCD display. Winstar TFT M Series which we called "Clever System" is an easy access system for users to begin exploring the TFT display on their applications.  The M Series TFT is an "all in one system" which supports two kinds of user interfaces; the UART interface and SPI interface, also build in USB to UART protocol (COM Port mode) as well.

WF70M series includes the microcontroller STM32 (CPU Speed 180M Hz) on control board, it supports backlight brightness adjust, PWM signal output and 4 switches button sensor. Winstar designed an UI (user interface).  By using Winstar TFT UI program and firmware, users can accelerate the project development.  The upgrade version firmware for WF70M now is available; please contact us for more details. 

WF70M model is available with Projected Capacitive Touch Panel (PCAP) and high brightness options as well. This TFT LCD Display can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +80℃.


Winstar Display - 7" Clever System TFT LCD - WF70MTIBGDRN0




Pin Symbol I/O Function
1 GND Power Supply Power Ground
2 TX O Uart Transmit pin
3 RX I Uart Receive pin
4 VBUS Power Supply Power supply : 5V
5 D+ I/O USB Data +
6 D- I/O USB Data -
7 GND Power Supply Power Ground
8 RST I Reset (active Low)
9 GND Power Supply Power Ground
10 PWM O Pulse width modulation
11 GND Power Supply Power Ground
12 VBUS Power Supply Power supply : 5V


Pin Symbol I/O Function
1 GND Power Supply Power Ground
2 SW1 I Switch ( active low)
3 SW2 I Switch ( active low)
4 SW3 I Switch ( active low)
5 SW4 I Switch ( active low)
6 GND Power Supply Power Ground
7 SDI O Master Input Slave Output (MISO)
8 SDO I Master Output Slave Input (MOSI)
9 SCK I Serial Clock
10 SCS I Serial Chip selection
11 SPI_INT O Serial Interrupt
12 VBUS Power Supply Power supply : 5V

General Specifications

Item Dimension Unit
Size 7 inch
Dot Matrix 800 × RGB × 480(TFT) dots
Module dimension 166.2(W) × 101.2(H) × 13.3 (D) mm
Active area 154.08 × 85.92 mm
Dot pitch 0.0642 × 0.179 mm
LCD type TFT, Normally White, Transmissive
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
Aspect Ratio 16:9
Backlight Type LED, Normally White
Interface Uart 19200 Baud rate/SPI
Touch Panel Without touch panel
Surface Anti-Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage For LCM VBUS 4.5 5 5.5 V
Supply Current For LCM IBUS 450 670 mA
Power Consumption VBUS=5V 2250 3685 mW

Search Keyword: 7 inch tft lcd, 7 tft lcd, 7" tft lcd, tft lcd 7, tft lcd 7", 7 tft display, tft display 7
go top