Home Products TFT LCD Bar Type TFT LCD WF52QTLBSDBN0

5.2" Bar Type LCD with Controller Board

Model No. WF52QTLBSDBN0

►Size : 5.2”
►Resolution : 480 x 128 dots
►View Direction : 6H
►Interface : 8080, MPU
►Controller IC : SSD1963
►Control-Board : Yes
►Brightness (cd/m²): 500
►Frame Through Hole : Yes
►Touch Screen : Without touch screen

Description

WF52QTLBSDBN0 model is an upgrade solution for monochrome Graphic STN WG24064A COB module to colorful TFT display, both diagonal size are 5.2 inch.  This STN WG24064A is having the resolution 240x64 pixels; the TFT WF52QTLBSDBN0 is having resolution 480x128 pixels which are with higher resolution and colorful images. Winstar developed this wholly new design WF52A with SSD1963 controller board on module to be a replacement of STN WG24064A.
 
Winstar TFT WF52QTLBSDBN0 is having module dimension of 180.0 x 65.0 mm which is the same as Winstar monochrome Graphic WG24064A.  Therefore, the customers can upgrade the existing mono STN WG24064A to color TFT directly since we designed a Pin-to-Pin interface on WF52QTLBSDBN0 module. Please refer to the below pin assignment of WF52QTLBSDBN0.
 
WF52QTLBSDBN0 is built in with SSD1963 controller board on module.  It supports 8080 family MPU 8bit and 16 bit parallel interface.  There are two connection interface options; 26 pins 8 bits using pin header and 36 pins 8 bits/16 bits using ZIF connector.  The LCM PIN Definition of CON1 is for those who used WG24064A version, it is pin-to-pin from pin 1 to pin 20.  WG24064A is using A.K pin for backlight, WF52QTLBSDBN0 is using pin 21 and pin 22 for backlight.  More details, please contact with our sales persons.
 
This TFT LCD WF52QTLBSDBN0 module can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +80℃.  Below is the basic specification of WF52QTLBSDBN0 as reference.

DRAWING

Winstar 5.2" TFT LCD with Display Controller Board

SPECIFICATIONS

Interface

1. LCM PIN Definition (CON4)
Pin Symbol Function
1 GND System round pin of the IC.
Connect to system ground.
2 VDD Power Supply : +3.3V
3 BL_E Backlight control signal , H: On \ L: Off
4 C/D Data/Command select
5 WR Write strobe signal
6 RD Read strobe signal
7~14 DB0~DB7 Data bus
15~22 DB8~DB15 Data bus (When select 8bits mode, this pin is NC)
23~24 NC No connect
25 CS Chip select
26 RESET Hardware reset
27 LR Right /Left selection; Default R/L is Pull High
28 UD Up/down selection; Default U/D is Pull High
29~32 NC No connection
33~34 VLED- VLED- for B/L LED inverter (GND)
35~36 VLED+ VLED+ for B/L LED inverter (+5V)

2. LCM PIN Definition (CON1)
Pin Symbol Function
1 FG Frame Grand
2 GND System round pin of the IC.
Connect to system ground.
3 VDD Power Supply : +3.3V
4 BLE Backlight control signal , H: On \ L: Off
5 WR Write strobe signal
6 RD Read strobe signal
7 CS Chip select
8 C/D Data/Command select
9 NC No connect
10 RESET Hardware reset
11~18 DB0~DB7 Data bus
19~20 NC No connect 
21 VLED+ VLED+ for B/L LED inverter (+5V)
22 VLED- VLED- for B/L LED inverter (GND)
23~25 NC No connect
26 GND Hardware reset

General Specifications

Item Dimension Unit
Size 5.2 inch
Dot Matrix 480 × RGB × 128 dots
Module dimension 180.0 × 65.0 × 8.8 mm
Active area 127.152 × 33.9072 mm
Dot pitch 0.0883 × 0.2649 mm
LCD type TFT, Normally White, Transmissive
View Direction 6 o'clock
Gray Scale Inversion Direction 12 o'clock
Backlight Type LED, Normally White
Driver IC SSD1963
Interface Digital 8080 family MPU 8bit/16bit
With /Without TP Without touch panel (screen)
Surface Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage For LCM VDD 3.0 3.1 3.3 V
Supply Current For LCM IDD 200 mA

Search keyword: tft 5.2, tft 5.2", 5.2 tft lcd, 5.2" tft lcd, 5.2 inch tft lcd, tft lcd 5.2, 5.2 tft display, 5.2" tft display, 5.2 inch tft display, tft display 5.2, tft display 5.2",bar type tft
go top
close

We value your privacy

By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.

We value your privacy

Winstar and certain third parties use cookies on www.winstar.com.tw. The details regarding the types of
cookies, their purpose and the third parties involved are described below and in our Cookie Policy.
Please click on “Allow All” to consent to our usage of cookies in order to have the best possible
experience on our websites. You can also set your preferences or reject cookies (except for strictly
necessary cookies).

Manage Consent Preferences

Always Active
Essential Cookies

These cookies are essential in order to enable you to move around the website and use its
features, such as setting your privacy preferences, logging in or filling in forms.

Analytics Cookies

Also known as “statistics cookies,” these cookies collect information about how you use a website, like which pages you visited and which links you clicked on. See Detail