Model No. WF52ATLASDNT0
►Size : 5.2”
►Resolution : 480x128 dots
►View Direction : 6H
►Interface : RGB
►Driver IC : ST7252 Or Equal
►Control-Board : No
►Brightness (cd/m²) : 350
►Frame Through Hole : No
►Touch Screen : Resistive Touch Panel( RTP)
WF52ATLASDNT0 is a Bar type 5.2 inch TFT LCD display with Resistive Touch Panel, a whole new size and resolution of TFT display. This 5.2 inch TFT display offers high quality and colorful images with a resolution of 480x128 pixels; it is especially suitable for industrial equipment, server systems, audio systems, POS systems, and advertising displays.
WF52ATLASDNT0 has a module dimension of 140.4 x 49.87 mm and an Active Area of 127.152 x 33.9072 mm, which is very close to the monochrome STN Graphic WG24064A; both have a diagonal size of 5.2 inches. WF52ATLASDNT0 is built with an ST7252 or equivalent driver IC. It supports RGB 24 bits parallel interface SYNC mode. If customers need a PCB with screw holes on a module with similar dimensions as WG24064A, they may choose our WF52Q model. This WF52A module operates at temperatures from -20℃ to +70℃ and has storage temperatures ranging from -30℃ to +80℃.
The display features a contrast ratio of 500:1 and a typical brightness of 350 cd/m², providing excellent visibility and image clarity. Its LED backlight offers a lifetime of 50,000 hours, ensuring long-term reliable performance.
| Item | Dimension | Unit |
|---|---|---|
| Size | 5.2 | inch |
| Dot Matrix | 480 × RGB × 128 | dots |
| Module dimension | 140.4 x 49.87 x 4.5 | mm |
| Active area | 127.152 x 33.9072 | mm |
| Dot pitch | 0.0 883 x 0. 2649 | mm |
| LCD type | TFT, Normally White, Transmissive | |
| View Direction | 6 o'clock | |
| Gray Scale Inversion Direction | 12 o'clock | |
| Aspect Ratio | Bar Type | |
| Backlight Type | LED, Normally White | |
| Driver IC | ST7252 Or Equal | |
| Interface | RGB 24bit | |
| Touch Panel | Resistive Touch Panel | |
| Surface | Anti-Glare | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
| Item | Symbol | Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage For LCM | VCC | － | 3.0 | 3.3 | 3.6 | V |
| Supply Current For LCM | ICC | - | － | 20 | － | mA |
| Pin | Symbol | Function |
|---|---|---|
| 1 | VLED- | Power for LED backlight cathode |
| 2 | VLED+ | Power for LED backlight anode |
| 3 | GND | Power ground |
| 4 | VCC | Power voltage |
| 5 | R0 | Red data (LSB) |
| 6~11 | R1~R6 | Red data |
| 12 | R7 | Red data (MSB) |
| 13 | G0 | Green data (LSB) |
| 14~19 | G1~G6 | Green data |
| 20 | G7 | Green data (MSB) |
| 21 | B0 | Blue data (LSB) |
| 22~27 | B1~B6 | Blue data |
| 28 | B7 | Blue data (MSB) |
| 29 | GND | Power ground |
| 30 | CLK | Pixel clock (DCLK) |
| 31 | LR | Right /Left selection; Default R/L is Pull High |
| 32 | HSYNC | Horizontal sync signal; negative polarity |
| 33 | VSYNC | Vertical sync signal; negative polarity |
| 34 | NC | No connection |
| 35 | UD | Up/down selection; Default U/D is Pull High |
| 36 | RESET | Reset signal |
| 37 | XR | Right electrode |
| 38 | YD | Bottom electrode |
| 39 | XL | Left electrode |
| 40 | YU | Top electrode |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.
