7-inch RS485 Modbus Smart Display with PCAP Touch and 32MB Flash - WL0F0007000A8GDACSA01

7-inch RS485 Modbus Smart Display with PCAP Touch and 32MB Flash

Model No. WL0F0007000A8GDACSA01

►TFT Size: 7"
►TFT Resolution: 1024×600 dots
►TFT View Direction: 85/85/85/85 (IPS)
►TFT Touch Screen: Projected capacitive touch screen (PCAP)
►Communication Interface: RS485
►Protocol: Modbus + GPIO
►Brightness(cd/m²): 450

PDF DOWNLOAD

DEMO CODE ADD TO INQUIRY

PREV. BACK to LIST NEXT

Description

WL0F0007000A8GDACSA01 is a 7-inch RS485 series smart display designed as a slave device that displays screens and reports touch status based on commands from a master device. This module consists of an IPS TFT display WF70A8TYAHLNGB paired with built-in firmware on a 4-layer FR4 PCB, integrating touch, display, and control functions.

This product is easy to use, significantly reducing development time and cost, accelerating project time-to-market. It supports multiple host platforms, including PCs (via USB to RS-485), MCUs, SBCs, and Raspberry Pi.

Features of the 7-inch RS485 smart display:

+12V power supply input (range: 8V–35V) with dynamic range support, power consumption approximately 6W.
Power-on self-test with automatic screen activation after booting.
RS485 communication interface supporting Modbus protocol.
Built-in or external 32MB flash memory for storing fonts, graphical objects, and Object Dictionary Data.
Supports projected capacitive touch panel (PCAP) and buzzer control (controlled by master device).
Compatible with multiple platforms such as PC (with USB to RS485 dongle), MCU, and Raspberry Pi.
GPIO pins support 3.3V TTL signals with a maximum tolerance of 5.5V.
Includes GUI Builder for interface design without programming. User guide
Equipped with STM32F series MCU and supports ST development tools.

Upgrade Your RS485 Systems with WINSTAR's Latest Smart Display (32MB Flash Upgrade) - WL0F0007000A8GDACSA01

Winstar provides a Windows-based GUI Builder that allows drag-and-drop design and real-time preview, enabling fast WYSIWYG interface creation. The latest version integrates three application templates (Industrial / Automotive / Medical). Users can switch templates by pressing the option key for 3 seconds at startup, or change templates anytime via the GUI Builder.

Try before you buy! Contact us to download WINSTAR GUI Builder application.

Smart Display products are designed with STMicroelectronics' (ST) controller which supports ST development tools like TouchGFX and STM32CubeIDE. You can also use ST tools to design WINSTAR Smart Display modules besides GUI builder.

TouchGFX: An advanced free-of-charge graphic software framework optimized for STM32 microcontrollers.
STM32CubeIDE: An advanced C/C++ development platform with peripheral configuration, code generation, code compilation, and debug features for STM32 microcontrollers and microprocessors.
STM32CubeMX: A graphical tool that allows a very easy configuration of STM32 microcontrollers, as well as the generation of the corresponding initialization C code for the Arm® Cortex®-M core or a partial Linux® Device Tree for Arm® Cortex®-A core, through a step-by-step process.
STM32CubeProg: An all-in-one multi-OS software tool for programming STM32 products. It provides an easy-to-use and efficient environment for reading, writing and verifying device memory through both the debug interface (JTAG and SWD) and the bootloader interface (UART, USB DFU, I2C, SPI, and CAN).

If you have purchased a WINSTAR Smart Display and wish to develop it by TouchGFX, please contact us through our website to obtain the initial code.

We also provide demo set with all needed accessories for you to realize your GUI design on smart displays.

DRAWING

Block Diagram

SPECIFICATIONS

General Specifications

Item	Standard Value	Unit
Operating voltage	8~35V	Vdc
Communication Interface	RS485 differential	-
MCU	STM32F746	N/A
Flash Memory	32	MB
SDRAM Frequency	100	MHz
LCD display size	7.0	inch
Pixel pitch	1024 x RGB x 600(TFT)	dots
Module dimension	184.1(W) x 103.8(H) x 22(D)	mm
Active area(AA)	154.2144 x 85.92	mm
Pixel pitch	0.1506 x 0.1432	mm
Brightness	Min:400; Typ:450	cd/m2
LCD type	TFT, Normally Black, Transmissive
Viewing Angle	85/85/85/85
Aspect Ratio	16:9
Touch Panel	Projected Capacitive Touch Panel (PCAP)
Surface	Glare

Absolute Maximum Ratings

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-20	－	+70	℃
Storage Temperature	TST	-30	－	+80	℃

Electrical Characteristics

Item	Symbol	Condition	Min	Typ	Max	Unit
Supply Voltage	VIN	－	8	12	32	V
Supply current	I(mA)	－	-	490	-	mA

BOM

Item	Description
LCM	WF70A8TYAHLNGB#
PCBA	SV10007R00A8C00N0109

Interface Pin Function

CON2 definition

Pin	Symbol	Function	Remark
1	VIN	Power supply V+	Input
2	GND	Power supply GND input	Input
3	Reserve	_	_
4	Reserve	_	_
5	GND	Power supply GND input	Input
6	GND	Power supply GND input	Input
7	Reserve	_	_
8	Reserve	_	_
9	VBUS	_	_
10	Reserve	UART RX interface(Reserve)	Reserve
11	Reserve	UART TX interface(Reserve)	Reserve
12	GND	GND	GND
13	Reserve	_	_
14	RS485_B	RS485 B	I/O
15	RS485_A	RS485 A	I/O
16	GND	GND	GND

CON3 definition

Pin	Symbol	Function	Remark
1	+3V3	3.3V power for JTAG interface	Output
2	SWCLK	CLK pin for JTAG interface	Input
3	GND	GND for JTAG interface	Output
4	SWDIO	Data pin for JTAG interface	I/O
5	NRST	Reset pin for JTAG interface	Input
6	GND	Power GND	Output
7	Wkup	WKup,ADC,Timer,Event,I/O	Input
8	BOOT0	Lo: Internal flash boot (Default) Hi: External flash boot	Input
9	IO_0	ADC,DAC,Timer,Event,I/O @3.3V	I/O
10	IO_1	ADC,Timer,Event,I/O @3.3V	I/O
11	IO_2	ADC,Timer,Event,I/O @3.3V	I/O
12	IO_3	ADC,Timer,Event,I/O @3.3V	I/O
13	IO_4	ADC,Timer,Event,I/O @3.3V	I/O
14	IO_5	ADC,Timer,Event,I/O @3.3V	I/O
15	IO_6	ADC,Timer,Event,I/O @3.3V	I/O
16	IO_7	RST,ADC,Event,I/O @3.3V	I/O