Model No. WG12232M
►Graphic LCD 122x32
►IC: ST79200
►1/32 duty cycle
►+5V power supply
►Chinese version
►Same size as WG12232B
►Interface: 6800/SPI
WG12232M is a graphic 122x32 liquid crystal display module with the same mechanical dimensions as WG12232B. It has an outline size of 65.4 x 28.2 mm and a viewing area size of 54.8 x 19 mm, with an active area size of 48.76 x 15.32 mm. This 122x32 graphic LCD display is equipped with an ST7920 controller IC, supporting Traditional Chinese and Simplified Chinese fonts.
WG12232M supports both the 6800 8-bit parallel and SPI serial interfaces. It can operate within temperatures ranging from -20℃ to +70℃, with storage temperatures ranging from -30℃ to +80℃. The logic supply voltage for WG12232M is 4.5V to 5.5V, with a typical value of 5.0V.
| Pin No. | Symbol | Level | Description |
|---|---|---|---|
| 1 | Vdd | 5V | Power supply for logic |
| 2 | Vss | 0V | Ground |
| 3 | Vo | (Variable) | Positive operating voltage for LCD |
| 4 | /RES | H/L | HàL Reset the LCM; |
| 5 | E | H/L | Enable signal; |
| 6 | Vout | － | Positive voltage output |
| 7 | R/W | H/L | Enable signal; |
| 8 | RS | H/L | Data/ Instruction |
| 9 | DB0 | H/L | Data bus |
| 10 | DB1 | H/L | Data bus |
| 11 | DB2 | H/L | Data bus |
| 12 | DB3 | H/L | Data bus |
| 13 | DB4 | H/L | Data bus |
| 14 | DB5 | H/L | Data bus |
| 15 | DB6 | H/L | Data bus |
| 16 | DB7 | H/L | Data bus |
| 17 | NC | － | No connection |
| 18 | NC | － | No connection |
| Item | Dimension | Unit |
|---|---|---|
| Number of dots | 122 x 32 | － |
| Module dimension | 65.4 x 28.2 x 6.8(Max) | mm |
| View area | 54.8 x 19.0 | mm |
| Active area | 48.76 x 15.32 | mm |
| Dot size | 0.36 x 0.41 | mm |
| Dot pitch | 0.40 x 0.45 | mm |
| Duty | 1/32 | |
| Backlight Type | LED | |
| IC | SBN1661G | |
| Interface | 6800 | |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
| Input voltage | VI | -0.3 | － | VDD+0.3 | V |
| Supply voltage for Logic | VDD-VSS | -0.3 | － | 5.5 | V |
| LCD Driver Voltage | VLCD | -0.3 | － | 7.0 | V |
| Item | Symbol | Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage For Logic | VDD-VSS | － | 4.5 | 5.0 | 5.5 | V |
| Supply Voltage For LCD | V0-VSS | Ta=-20℃ Ta=25℃ Ta=70℃ |
－ 4.6 4.2 |
－ 4.75 － |
5.3 4.9 － |
V V V |
| Input High Volt. | VIH | － | 0.7VDD | － | VDD | V |
| Input Low Volt. | VIL | － | -0.3 | － | 0.6 | V |
| Output High Volt. | VOH | － | 0.8VDD | － | VDD | V |
| Output Low Volt. | VOL | － | － | － | 0.4 | V |
| Supply Current | IDD | VDD=5.0V | 0.8 | 1.0 | 1.2 | mA |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.
