Startseite Produkte OLED-Anzeige Touch-OLED-Display WEN025664A-CTP

2,8 zoll OLED-Anzeigen 256x64 mit Touchpanel

Modellnummer WEN025664A-CTP

►Typ: Grafik
►Bauweise: COF+FR+PCB
►Größe: OLED 2,8 Zoll
►256×64 Punktmatrix OLED
►Integrierter Controller SSD1322
►3-V-Stromversorgung
►1/64 duty cycle
►Schnittstelle: 6800, 8080, SPI
►Touchscreen: Touchscreen Kapazitiv (CTP)
►Berührungspunkte : 1 Finger
►Kolor wyświetlacza: Weiß / Gelb / Grün
►Unterstützt Grauskala

Zeichnung

2.8 inch 256x64 OLED Display with Touch Panel Support Grayscale - WEN025664A-CTP

Data source ref: WEN025664AWPP3D00000

Technische Daten

Schnittstelle Pin-Funktion

Pin Number Symbol I/O Beschreibung
1 VSS P Ground.
2 VDD P Power Supply for Core Logic Circuit
Power supply pin for core logic operation. A capacitor is required to connect between this pin and VSS
3 N.C. P Reserved Pin
The N.C. pin between function pins are reserved for compatible and flexible design.
4 D/C# I Data/Command Control
This pin is Data/Command control pin connecting to the MCU.
When the pin is pulled HIGH, the content at D[7:0] will be interpreted as data.
When the pin is pulled LOW, the content at D[7:0] will be interpreted as command.
5 R/W#
(WR#)
I Read/Write Select or Write
This pin is MCU interface input. When interfacing to a 68XX-series microprocessor, this pin will be used as Read/Write (R/W#) selection input. Pull this pin to “High” for read mode and pull it to “Low” for write mode.
When 80XX interface mode is selected, this pin will be the Write (WR#) input. Data write operation is initiated when this pin is pulled low and the CS# is pulled low.
When serial mode is selected, this pin must be connected to VSS.
6 E/RD# I Read/Write Enable or Read
This pin is MCU interface input.
When interfacing to a 68XX-series microprocessor, this pin will be used as the Enable (E) signal. Read/write operation is initiated when this pin is pulled high and the CS# is pulled low.
When connecting to an 80XX-microprocessor, this pin receives the Read (RD#) signal. Data read operation is initiated when this pin is pulled low and CS# is pulled low.
When serial mode is selected, this pin must be connected to VSS.
7~14 DB0 I/O Host Data Input/Output Bus
These pins are 8-bit bi-directional data bus to be connected to the microprocessor’s data bus.
When serial mode is selected, D1 will be the serial data input SDIN and D0 will be the serial clock input SCLK.
DB1
DB2
DB3
DB4
DB5
DB6
DB7
15 NC P Reserved Pin
The N.C. pin between function pins are reserved for compatible and flexible design.
16 RES# I This pin is reset signal input.
When the pin is pulled LOW, initialization of the chip is executed.
Keep this pin pull HIGH during normal operation.
17 CS# I Data/Command Control
This pin is the chip select input connecting to the MCU. The chip is enabled for MCU communication only when CS# is pulled LOW.
18 NC P Reserved Pin
The N.C. pin between function pins are reserved for compatible and flexible design.
19 BS1 I Communicating Protocol Select
These pins are MCU interface selection input. See the following table:
BS[1:0] Interface
00 4 line SPI
01 3 line SPI
10 8-bit 8080 parallel
11 8-bit 6800 parallel

Note
(1) 0 is connected to VSS
(2) 1 is connected to VDD
20 BS0
21 TP_SCK I I2C clock input
22 TP_SDA I I2C data input and output
23 TP_INT I External interrupt to the host
24 TP_RST I External Reset, Low is active

mechanische Daten

Artikel Ausmaß Einheit
Punktmatrix 256 × 64 Dots
Abmaße der modul 85,0 × 39,8 ×7,83 mm
Aktiver Bereich 69,1 × 17,26 mm
Pixelgröße 0,248×0,248 mm
Pixelabstand 0,27×0,27 mm
der Anzeigemodus Passive Matrix
die Farbe des Displays Monochrome
Drive Duty 1/64 Duty
OLED IC SSD1322 (COF)
OLED Schnittstelle 6800, 8080, SPI
Größe (Diagonale) 2,8 Zoll
CTP IC FT6336U
Berührungspunkte 1
CTP Schnittstelle I2C
Oberfläche Glanz

Absolute Grenzwerte

Absolute Grenzwerte

Parameter Symbol Mindestwert Maximalwert Einheit
Supply Voltage for Display VDD -0,3 4 V
Betriebstemperatur TOP -20 +70 °C
Lagertemperatur TSTG -30 +80 °C

elektronische Eingenschaften

DC elektronische Eingenschaften

Artikel Symbol Bedingung Mindestwert typischer Wert Maximalwert Einheit
Logic supply voltage VDD 2,8 3,0 3,3 V
High Level Input VIH 0,8×VDD VDD V
Low Level Input VIL 0 0,2×VDD V
High Level Output VOH 0,9×VDD VDD V
Low Level Output VOL 0 0,1×VDD V
50% Check Board operating Current VDD =3V 125 250 mA
go top
close