Startseite Produkte OLED-Anzeige Touch-OLED-Display WEO128128D-CTP

1,18 Zoll 128x128 Rundes OLED Display mit kapazitivem Touchscreen

Modellnummer WEO128128D-CTP

►1,18 Zoll OLED
►Rundes OLED Display
►Typ: Grafik
►Bauweise: COG
►128x128 Punktmatrix
►IC:SSD1327
►3-V-Stromversorgung
►1/128 duty
►Schnittstelle: SPI, I2C
►kapazitiven Touchscreen (CTP)
►Berührungspunkte : 1 Finger
►die Farbe des Displays: Weiß / Gelb
►Support Grayscale

Beschreibung

WEO128128D-CTP ist ein beliebtes Ø1,18-Zoll rundes OLED-Display mit integriertem kapazitivem Touchscreen im Modul und einer Auflösung von 128x128 Pixeln. Das Modul ist mit dem SSD1327-IC ausgestattet, das eine 4-Leiter-SPI- und I2C-Schnittstelle unterstützt, eine typische Logikversorgungsspannung von 3V aufweist und eine 1/128-Steuerungsduty besitzt. Das WEO128128D-CTP-Modell enthält außerdem den FT3268-Touchpanel-IC im Modul, der eine I2C-Schnittstelle unterstützt und einen einzigen Erkennungspunkt für den kapazitiven Touchscreen aufweist.

Dieses runde OLED-Modell WEO128128D mit CTP eignet sich ideal für Smart-Home-Anwendungen, intelligente Technologiegeräte, Energiesysteme, Kommunikationssysteme, medizinische Instrumente usw. Dieses OLED-Modul bietet ein hohes Kontrastverhältnis von 10.000:1 und einen breiten Betrachtungswinkel von bis zu 160°, was zu einer klareren Darstellung der Bilder führt. Das Modul kann bei Temperaturen von -20℃ bis +70℃ betrieben werden, wobei die Lagertemperaturen von -30℃ bis +70℃ reichen.

 

Zeichnung

1.18" 128x128 Round OLED Display Module with Touch Screen - WEO128128D-CTP
Data source ref: WEO128128DWPP3D00003

Technische Daten

mechanische Daten

Artikel Ausmaß Einheit
Punktmatrix 128 x 128 Punkte
Abmaße der modul Ø50,5 × 5,0 mm
Aktiver Bereich Ø30,0 mm
Punktgröße 0,210 × 0,210 mm
Punktabstand 0,235 × 0,235 mm
Display Mode Passive Matrix
Display Color Monochromes
Drive Duty 1/128Duty
Grauskala 4 bits
IC SSD1327
Schnittstelle 4-line SPI , I2C
Größe (Diagonale) 1,18 Zoll
 
CTP IC FT3268
Berührungspunkte 1
CTP Schnittstelle I2C

Absolute Grenzwerte

Parameter Symbol Mindestwert Maximalwert Einheit
Supply Voltage for Operation VCI -0,3 4,0 V
Supply Voltage for Logic VDD -0,5 2,75 V
Supply Voltage for Display VCC -0,5 19,0 V
Betriebstemperatur TOP -20 +70 °C
Lagertemperatur TSTG -30 +70 °C

elektronische Eingenschaften

DC elektronische Eingenschaften

Artikel Symbol Bedingung Mindestwert typischer Wert Maximalwert Einheit
Supply Voltage for Logic VCI 2,8 3,0 3,3 V
Supply Voltage for Display VCC 8,0 14,5 15,0 V
Supply Voltage for Logic VDD 1,65 2,6 V
High Level Input VIH 0,8×VCI VCI V
Low Level Input VIL 0 0,2×VCI V
High Level Output VOH Iout = 100uA 0,9×VCI VCI V
Low Level Output VOL Iout = 100uA 0 0,1×VCI V
50% Check Board operating Current VCC =14,5V 15 30 mA
 

Touch Panel Controller FT3268

Artikel Symbol Bedingung Mindestwert typischer Wert Maximalwert Einheit
Input High Volt. VIH 0.7×VDD VDD V
Input Low Volt. VIL -0.3 0.3×VDD V
Output High Volt. VOH IOH = 0.1mA 0.7×VDD V
Output Low Volt. VOL IOL = 0.1mA 0.3×VDD V

Schnittstelle Pin-Funktion

No. Symbol Beschreibung
1 VSS Ground pin. It must be connected to external ground.
2 VCC Power supply for panel driving voltage. This is also the most positive power voltage supply pin. It is supplied by external high voltage source.
3 VCOMH COM signal deselected voltage level.
A capacitor should be connected between this pin and VSS. No external power supply is allowed to connect to this pin.
4 VCI Low voltage power supply and power supply for interface logic level. It should match with the MCU interface voltage level and must be connected to external source.
VCI must always set to be equivalent to or higher than VDD.
5 VDD Power supply pin for core logic operation.
VDD can be supplied externally (within the range of 2.4V to 2.6V) or regulated
Internally from VCI. A capacitor should be connected between VDD and VSS under all circumstances.
6 BS1 MCU bus interface selection pins. Select appropriate logic setting as described in the following table. BS1 is pin select.
Bus Interface selection
BS1 Interface
0 4-line SPI
1 I2C
Note  (1) 0 is connected to VSS  (2) 1 is connected to VCI
7 IREF This pin is the segment output current reference pin
8 CS# This pin is the chip select input connecting to the MCU.
The chip is enabled for MCU communication only when CS# is pulled LOW (active LOW).
9 RES# This pin is reset signal input.
When the pin is pulled LOW, initialization of the chip is executed.
Keep this pin pull HIGH during normal operation.
10 DC# This pin is Data/Command control pin connecting to the MCU.
When the pin is pulled HIGH, will be interpreted as data.
When the pin is pulled LOW, will be transferred to a command register
In I2C mode, this pin acts as SA0 for slave address selection.
11 D0 When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN and D2 should be kept NC.
When I2C mode is selected, D2, D1 should be tied together and serve as SDAout , SDAin in application and D0 is the serial clock input, SCL.
12 D1
13 D2
14 TP_SCK I2C clock signal
15 TP_SDA I2C data signal
16 TP_INT Interrupt signal
17 VCC Power supply for panel driving voltage. This is also the most positive power voltage supply pin.
18 VSS Ground

Zuletzte angesehen

go top
close

Wir schätzen Ihre Privatsphäre

Durch Klicken auf „Alle Cookies zulassen“ stimmen Sie der Speicherung von Cookies auf Ihrem Gerät zu, um die Navigation auf der Website zu verbessern, die Nutzung der Website zu analysieren und unsere Marketing- und Leistungsbemühungen zu unterstützen. Weitere Informationen zu diesem Thema finden Sie in unserer Richtlinie. Datenschutzrichtlinie

Wir schätzen Ihre Privatsphäre

Winstar und bestimmte Drittparteien verwenden Cookies auf www.winstar.com.tw. Die Einzelheiten zu den Arten von Cookies, ihrem Zweck und den beteiligten Drittparteien sind unten sowie in unserer Cookie-Richtlinie beschrieben. Klicken Sie auf „Alle zulassen“, um unserer Verwendung von Cookies zuzustimmen und die bestmögliche Erfahrung auf unseren Websites zu erzielen. Sie können auch Ihre Präferenzen festlegen oder Cookies ablehnen (mit Ausnahme der unbedingt erforderlichen Cookies).

Einwilligungspräferenzen verwalten

Immer aktiv
Notwendige Cookies

Diese Cookies sind unerlässlich, um Ihnen das Navigieren auf der Website zu ermöglichen und ihre Funktionen zu nutzen, wie z. B. das Festlegen Ihrer Datenschutzpräferenzen, das Einloggen oder das Ausfüllen von Formularen.

Analyse-Cookies

Diese Cookies, auch als „Statistik-Cookies“ bekannt, sammeln Informationen darüber, wie Sie eine Website nutzen, z. B. welche Seiten Sie besucht und auf welche Links Sie geklickt haben. Siehe Details.