Home Productos Pantalla OLED Pantalla táctil OLED WEO128128D-CTP

Círculo Módulos OLED Con Táctil Capacitivo 1.18", 128x128

Modelo Nº WEO128128D-CTP

►Tipo : Gráfico
►Estructura : COG
►Tamaño : 1.18 pulgada
►Matriz de puntos 128x128
►IC:SSD1327
►Fuente de alimentación de 3V
►1/128 duty
►Interfaz : SPI, I2C
►Con panel táctil capacitivo (CTP)
►Puntos táctiles : 1 Puntos
►Color de la pantalla: Blanco / Amarillo
►Compatibilidad con escala de grises

Descripción

WEO128128D-CTP es un popular display OLED redondo de Ø1,18 pulgadas con panel táctil capacitivo integrado en el módulo, con una resolución de 128x128 puntos. El módulo está equipado con el circuito integrado SSD1327, que admite una interfaz SPI de 4 líneas y I2C, con un voltaje de suministro lógico típico de 3V y un ciclo de conducción de 1/128. Además, el modelo WEO128128D-CTP incluye el circuito integrado FT3268 para paneles táctiles integrado en el módulo, que admite la interfaz I2C y cuenta con un único punto de detección para la pantalla táctil capacitiva.

Este modelo redondo de OLED WEO128128D con CTP es ideal para aplicaciones de hogar inteligente, dispositivos de tecnología inteligente, sistemas de energía, sistemas de comunicación, instrumentos médicos, etc. Este módulo OLED ofrece una alta relación de contraste de 10000:1 y un amplio ángulo de visión de hasta 160°, lo que se traduce en imágenes más nítidas. El módulo puede funcionar a temperaturas desde -20℃ hasta +70℃, con temperaturas de almacenamiento que van desde -30℃ hasta +70℃.

 

DIBUJO

1.18" 128x128 Round OLED Display Module with Touch Screen - WEO128128D-CTP
Data source ref: WEO128128DWPP3D00003

ESPECIFICACIONES

Función interfaz Pin

No. Símbolo Función
1 VSS Ground pin. It must be connected to external ground.
2 VCC Power supply for panel driving voltage. This is also the most positive power voltage supply pin. It is supplied by external high voltage source.
3 VCOMH COM signal deselected voltage level.
A capacitor should be connected between this pin and VSS. No external power supply is allowed to connect to this pin.
4 VCI Low voltage power supply and power supply for interface logic level. It should match with the MCU interface voltage level and must be connected to external source.
VCI must always set to be equivalent to or higher than VDD.
5 VDD Power supply pin for core logic operation.
VDD can be supplied externally (within the range of 2.4V to 2.6V) or regulated
Internally from VCI. A capacitor should be connected between VDD and VSS under all circumstances.
6 BS1 MCU bus interface selection pins. Select appropriate logic setting as described in the following table. BS1 is pin select.
Bus Interface selection
BS1 Interface
0 4-line SPI
1 I2C
Note  (1) 0 is connected to VSS  (2) 1 is connected to VCI
7 IREF This pin is the segment output current reference pin
8 CS# This pin is the chip select input connecting to the MCU.
The chip is enabled for MCU communication only when CS# is pulled LOW (active LOW).
9 RES# This pin is reset signal input.
When the pin is pulled LOW, initialization of the chip is executed.
Keep this pin pull HIGH during normal operation.
10 DC# This pin is Data/Command control pin connecting to the MCU.
When the pin is pulled HIGH, will be interpreted as data.
When the pin is pulled LOW, will be transferred to a command register
In I2C mode, this pin acts as SA0 for slave address selection.
11 D0 When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN and D2 should be kept NC.
When I2C mode is selected, D2, D1 should be tied together and serve as SDAout , SDAin in application and D0 is the serial clock input, SCL.
12 D1
13 D2
14 TP_SCK I2C clock signal
15 TP_SDA I2C data signal
16 TP_INT Interrupt signal
17 VCC Power supply for panel driving voltage. This is also the most positive power voltage supply pin.
18 VSS Ground

Datos mecánicos

Elemento Dimensión Unidad
Matriz de puntos 128 × 128 puntos
Dimensión del módulo Ø50.5 × 5.0 mm
zona activa Ø30.0 mm
Tamaño del punto 0.210 × 0.210 mm
Distancia entre puntos 0.235 × 0.235 mm
Modo de visualización Matriz pasiva
Color de la pantalla Monocromos
Drive Duty 1/128Duty
Escala de grises 4 bits
IC SSD1327
Interfaz 4-line SPI , I2C
Tamaño (Diagonal) 1.18 pulgada
 
CTP IC FT3268
Puntos táctiles 1
CTP Interfaz I2C

Valores nominales máximos absolutos

Parameter Símbolo Valor mín. Valor máx. Unidad
Supply Voltage for Operation VCI -0.3 4.0 V
Supply Voltage for Logic VDD -0.5 2.75 V
Supply Voltage for Display VCC -0.5 19.0 V
Temperatura de funcionamiento TOP -20 +70 °C
Temperatura de almacenamiento TSTG -30 +70 °C

Características electrónicas

DC Características electrónicas

Elemento Símbolo Condición Valor mín. Valor típico Valor máx. Unidad
Supply Voltage for Operation VCI 2.8 3.0 3.3 V
Supply Voltage for Display VCC 8.0 14.5 15.0 V
Supply Voltage for Logic VDD 1.65 2.6 V
High Level Input VIH 0.8×VCI VCI V
Low Level Input VIL 0 0.2×VCI V
High Level Output VOH Iout = 100uA 0.9×VCI VCI V
Low Level Output VOL Iout = 100uA 0 0.1×VCI V
50% Check Board operating Current VCC =14.5V 15 30 mA

 

Touch Panel Controller FT3268

Elemento Símbolo Condición Valor mín. Valor típico Valor máx. Unidad
Input High Volt. VIH 0.7×VDD VDD V
Input Low Volt. VIL -0.3 0.3×VDD V
Output High Volt. VOH IOH = 0.1mA 0.7×VDD V
Output Low Volt. VOL IOL = 0.1mA 0.3×VDD V

Search keyword: 128x128 oled, oled 128x128, 1.18 oled, 1.18" oled, 1.18 pulgada oled, oled 1.18pulgada, oled 1.18"

go top
close