Startseite Produkte OLED-Anzeige OLED mit Knopf WEO012864Z

Ø0,96 Zoll 128×64 OLED mit Knopf

Modellnummer WEO012864Z

►0,96 Zoll OLED
►Rundes OLED Display
►Typ: Grafik
►Bauweise: COG
►128x64 Punktmatrix
►Integrierter Controller SSD1306
►3-V-Stromversorgung
►1/64 duty
►Schnittstelle: SPI, I2C
►die Farbe des Displays: Weiß / Gelb / Blau

Beschreibung

Zeichnung

Ø 0.96" 128×64 OLED Knob - WEO012864Z
 

Data source ref: WEO012864ZLPP3N00000

Technische Daten

Schnittstelle Pin-Funktion

Pin No. Symbol Beschreibung
1 VSS Ground pin.
2 VCC Power supply for panel driving voltage. This is also the most positive power voltage supply pin.
3 VCOMH COM signal deselected voltage level.
A capacitor should be connected between this pin and VSS.
4 VCI Power supply pin for core logic operation
5 NC No connection
6 BS1 MCU bus interface selection pins.
Select appropriate logic setting as described in the following table.
  BS1
I2C 1
4-wire Serial 0
Note
(1) 0 is connected to VSS
(2) 1 is connected to VCI
7 IREF This is segment output current reference pin.
When external IREF is used, a resistor should be connected between this pin and VSS to maintain the IREF current at a maximum of 30uA.
8 CS# This pin is the chip select input. (active LOW).
9 RES# This pin is reset signal input.
When the pin is pulled LOW, initialization of the chip is executed.
Keep this pin HIGH during normal operation.
10 D/C# When 4-wire serial interface is selected, this pin is Data/Command control pin connecting to the MCU.
In I2C mode, this pin acts as SA0 for slave address selection.
11 D0 These pins are bi-directional data bus connecting to the MCU data bus.
When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN and D2 should be kept NC.
When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL.
12 D1
13 D2
14 NC No connection
15 NC No connection
16 NC No connection
17 VCC Power supply for panel driving voltage. This is also the most positive power voltage supply pin.
18 VSS Ground pin.
 

Encoder PIN Definition

No. Symbol Beschreibung
1 FSW_A Encoder terminal signal-A
2 FSW_B Encoder terminal signal-B
3 FSW_C Encoder terminal signal-C
4 FSW_D Ground

mechanische Daten

Artikel Ausmaß Einheit
Punktmatrix 128 x 64 Punkte
Abmaße der modul Ø39,4 x 24,8 mm
Aktiver Bereich 21,74 x 10,86 mm
Punktgröße 0,148 x 0,148 mm
Punktabstand 0.17 x 0.17 mm
Display Mode Passive Matrix
Display Color Monochromes
Drive Duty 1/64
IC SSD1326
Schnittstelle 4-line SPI , I2C
Größe (Diagonale) 0,96 Zoll

Absolute Grenzwerte

Artikel Symbol Mindestwert Maximalwert Einheit
Supply Voltage VCI -0,3 4,0 V
Supply Voltage for Display VCC 0 15 V
Betriebstemperatur TOP -20 +70 °C
Lagertemperatur TST -30 +80 °C

elektronische Eingenschaften

DC elektronische Eingenschaften

Artikel Symbol Bedingung Mindestwert typischer Wert Maximalwert Einheit
Supply Voltage VCI 1,65 3,0 3,3 V
Supply Voltage for Display VCC 6 10 10,5 V
Input High Volt. VIH 0,8xVCI V
Input Low Volt. VIL 0,2xVCI V
Output High Volt. VOH Iout = 100uA 0,9xVCI V
Output Low Volt. VOL Iout = 100uA 0,1xVCI V
Operating Current for VCC (VCC Supplied Externally) ICC VCC =10V 5 10 mA
go top
close