Accueil Produits Module OLED Bouton OLED WEO012864Z

Bouton OLED Ø0.96 pouces 128×64

N° de modèle WEO012864Z

►Type: Graphique
►Structure: COG
►Dimension: 0.96 pouces
►Matrice de points 128x64
►IC:SSD1306
►Alimentation 3V
►1/64 duty
►Interface: SPI, I2C
►Couleur d'affichage: Blanc / Jaune / Bleu ciel

Description

DESSIN

Ø 0.96" 128×64 OLED Knob - WEO012864Z
 

Data source ref: WEO012864ZLPP3N00000

SPÉCIFICATIONS

Fonction PIN sur l'interface

Pin No. Symbole Function
1 VSS Ground pin.
2 VCC Power supply for panel driving voltage. This is also the most positive power voltage supply pin.
3 VCOMH COM signal deselected voltage level.
A capacitor should be connected between this pin and VSS.
4 VCI Power supply pin for core logic operation
5 NC No connection
6 BS1 MCU bus interface selection pins.
Select appropriate logic setting as described in the following table.
  BS1
I2C 1
4-wire Serial 0
Note
(1) 0 is connected to VSS
(2) 1 is connected to VCI
7 IREF This is segment output current reference pin.
When external IREF is used, a resistor should be connected between this pin and VSS to maintain the IREF current at a maximum of 30uA.
8 CS# This pin is the chip select input. (active LOW).
9 RES# This pin is reset signal input.
When the pin is pulled LOW, initialization of the chip is executed.
Keep this pin HIGH during normal operation.
10 D/C# When 4-wire serial interface is selected, this pin is Data/Command control pin connecting to the MCU.
In I2C mode, this pin acts as SA0 for slave address selection.
11 D0 These pins are bi-directional data bus connecting to the MCU data bus.
When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN and D2 should be kept NC.
When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL.
12 D1
13 D2
14 NC No connection
15 NC No connection
16 NC No connection
17 VCC Power supply for panel driving voltage. This is also the most positive power voltage supply pin.
18 VSS Ground pin.
 

Encoder PIN Definition

No. Symbole Function
1 FSW_A Encoder terminal signal-A
2 FSW_B Encoder terminal signal-B
3 FSW_C Encoder terminal signal-C
4 FSW_D Ground

Données mécaniques

Article Dimensions Unité
Matrice de points 128 x 64 Dots
Dimensions du module Ø39.4 x 24.8 mm
Zone active 21.74 x 10.86 mm
Pixel Size 0.148 x 0.148 mm
Pixel Pitch 0.17 x 0.17 mm
Mode d'affichage Matrice passive
Couleur d'affichage Monochrome
Drive Duty 1/64
IC SSD1326
Interface double ligne 4-line SPI , I2C
Diagonale 0.96 pouces

Valeurs nominales maximales absolues

Article Symbole Min Max Unité
Supply Voltage VCI -0.3 4.0 V
Supply Voltage for Display VCC 0 15 V
Température de fonctionnement TOP -20 +70 °C
Température de stockage TST -30 +80 °C

Caractéristiques électroniques

DC Caractéristiques électroniques

Article Symbole État Min Typ Max Unité
Supply Voltage for Logic VCI 2.8 3.0 3.3 V
Supply Voltage for Display VCC 14.0 14.5 15.0 V
High Level Input VIH 0.8×VCI VCI V
Low Level Input VIL 0 0.2×VCI V
High Level Output VOH Iout = 100uA 0.9×VCI VCI V
Low Level Output VOL Iout = 100uA 0 0.1×VCI V
50% Check Board operating Current VCC =14.5V 24 36 mA

Search keyword: 128x64 oled, oled 128x64, 0.96 oled, 0.96" oled, 0.96 pouces oled, oled 0.96 pouces, oled 0.96"

go top
close