2,7", 128x64 kapazitives Touch-Panel OLED-Anzeigemodule + Frame +PCB
Modellnummer WEP012864Q-CTP
►Typ: Grafik
►Bauweise: COG + Frame + PCB
►Größe: 2,7 Zoll
►128 x 64 Punktmatrix
►IC:SSD1309
►3-V-Stromversorgung
►1/64 duty
►Schnittstelle: 6800, 8080, SPI, I2C
►Touch Panel: kapazitives Touch-Panel (CTP)
►Berührungspunkte : 1 Finger
►die Farbe des Displays: Weiß / Gelb / Himmelblau / Grün
Beschreibung
Das Modell WEP012864Q-CTP ist ein COG-Grafik-OLED mit kapazitivem Touchpanel, 2,7 Zoll in der Diagonale und einer Auflösung von 128x64 Pixel. Dieses OLED-Modul ist mit dem SSD1309-IC ausgestattet, das die 6800/8080 8-Bit-Parallel-, I2C- und 4-Wire-SPI-Schnittstelle unterstützt. Die Versorgungsspannung für die Logik beträgt 3V, der Displaystrom mit 50% Checkboard beträgt 175mA @ 3,0V VDD (typischer Wert) mit einer Treiberpflicht von 1/64. Dieses Modell verfügt über ein kapazitives Touchpanel auf dem Modul und ist mit dem GT911-IC ausgestattet, das die I2C-Schnittstelle unterstützt und einen Erkennungspunkt für CTP sowie eine normale blendende Glasoberfläche aufweist. Das Modul ist mit einer Leiterplatte (PCB) auf dem Modul ausgestattet, was es den Kunden ermöglicht, eine Drahtverbindung zu verwenden, ohne dass sie zusätzliche PCBs für ihre Anwendungen entwickeln müssen. Außerdem haben wir einen VCC-Schaltkreis auf der Leiterplatte integriert, um es den Kunden zu erleichtern.
Das WEP012864Q-CTP-Modell ist ein COG-OLED-Display mit einer Leiterplatte auf dem Modul. Diese Leiterplatte mit vier Montagelöchern ist eine einfache Methode, um Module an ihren Anwendungen zu befestigen. Dieses OLED-Modul eignet sich für Anwendungen im Smart-Home-Bereich, in medizinischen Geräten, in der industriellen Steuerung usw. Das WEP012864Q-CTP-Modell kann bei Temperaturen von -20℃ bis +70℃ betrieben werden, wobei der Lagerungstemperaturbereich von -30℃ bis +80℃ reicht.
Zeichnung
Data source ref: WEP012864QWPP3D00000
Technische Daten
Schnittstelle Pin-Funktion
No. | Symbol | Beschreibung | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | VSS | Ground. | |||||||||||||||
2 | VDD | Power supply pin for core logic operation | |||||||||||||||
3 | NC | No connection | |||||||||||||||
4 | D/C# | This pin is Data/Command control pin connecting to the MCU. When the pin is pulled HIGH, the data at D[7:0] will be interpreted as data. When the pin is pulled LOW, the data at D[7:0] will be transferred to a command register. In I2C mode, this pin acts as SA0 for slave address selection. |
|||||||||||||||
5 | R/W# (WR#) |
This pin is read / write control input pin connecting to the MCU interface. When 6800 interface mode is selected, this pin will be used as Read/Write (R/W#) selection input. Read mode will be carried out when this pin is pulled HIGH and write mode when LOW. When 8080 interface mode is selected, this pin will be the Write (WR#) input. Data write operation is initiated when this pin is pulled LOW and the chip is selected. When serial or I2C interface is selected, this pin must be connected to VSS. |
|||||||||||||||
6 | E(/RD#) | This pin is MCU interface input. When 6800 interface mode is selected, this pin will be used as the Enable (E) signal. Read/write operation is initiated when this pin is pulled HIGH and the chip is selected. When 8080 interface mode is selected, this pin receives the Read (RD#) signal. Read operation is initiated when this pin is pulled LOW and the chip is selected. When serial or I2C interface is selected, this pin must be connected to VSS. |
|||||||||||||||
7-14 | D0~D7 | These pins are bi-directional data bus connecting to the MCU data bus. Unused pins are recommended to tie LOW. When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN and D2 should be kept NC. When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL. |
|||||||||||||||
15 | NC | No connection | |||||||||||||||
16 | RES# | This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed. Keep this pin pull HIGH during normal operation. |
|||||||||||||||
17 | CS# | This pin is the chip select input connecting to the MCU. The chip is enabled for MCU communication only when CS# is pulled LOW (active LOW). |
|||||||||||||||
18 | NC | No connection | |||||||||||||||
19 | BS2 | MCU bus interface selection pins. Select appropriate logic setting as described in the following table. BS2 and BS1 are pin select
(1) 0 is connected to VSS (2) 1 is connected to VDD |
|||||||||||||||
20 | BS1 | ||||||||||||||||
21 | TP_SCK | I2C clock signal | |||||||||||||||
22 | TP_SDA | I2C data signal | |||||||||||||||
23 | TP_INT | External interrupt signal, active low | |||||||||||||||
24 | TP_RST | External reset signal, active low |
mechanische Daten
Artikel | Ausmaß | Einheit |
---|---|---|
Punktmatrix | 128 x 64 | - |
Abmaße der modul | 82,0 × 47,5 × 8,65 Max. | mm |
Aktiver Bereich | 61,41 × 30,69 | mm |
Punktgröße | 0,45 × 0,45 | mm |
Punktabstand | 0,48 × 0,48 | mm |
Display Mode | Passive Matrix | |
Display Color | Monochrome | |
Drive Duty | 1/64 Duty | |
IC | SSD1309 | |
Schnittstelle | 6800,8080,4-Wire SPI,I2C | |
Größe (Diagonale) | 2,7 Zoll | |
CTP IC | GT911 | |
Berührungspunkte | 1 | |
CTP Schnittstelle | I2C | |
Oberfläche | Glanz |
Absolute Grenzwerte
Parameter | Symbol | Mindestwert | Maximalwert | Einheit |
---|---|---|---|---|
Supply Voltage for Logic | VDD | -0,3 | 4 | V |
Betriebstemperatur | TOP | -20 | +70 | °C |
Lagertemperatur | TSTG | -30 | +80 | °C |
elektronische Eingenschaften
DC elektronische Eingenschaften
Artikel | Symbol | Bedingung | Mindestwert | typischer Wert | Maximalwert | Einheit |
---|---|---|---|---|---|---|
Supply Voltage for Logic | VDD | - | 2,8 | 3,0 | 3,3 | V |
High Level Input | VIH | - | 0,8×VDD | - | - | V |
Low Level Input | VIL | - | - | - | 0,2×VDD | V |
High Level Output | VOH | - | 0,9×VDD | - | - | V |
Low Level Output | VOL | - | - | - | 0,1×VDD | V |
50% Check Board operating Current | VDD =3V | - | 175 | 350 | mA |
Touch Panel Controller GT911
Artikel | Symbol | Mindestwert | typischer Wert | Maximalwert | Einheit |
---|---|---|---|---|---|
Input High Volt. | VIH | 0,75xVDD | VDD+0,3 | V | |
Input Low Volt. | VIL | -0,3 | - | 0,25xVDD | V |
Output High Volt. | VOH | 0,85xVDD | - | - | V |
Output Low Volt. | VOL | - | - | 0,15xVDD | V |