首頁 產品介紹 COG LCD顯示模組 WO12864T

128x64 COG LCD 模組

型號 WO12864T

►COG LCD 顯示模組
►繪圖型
►解析度128x64
►內建控制器 ST7565P
►3.3V電源電壓
►1/65 duty cycle, 1/9 bias
►介面: 6800/8080/SPI

產品敘述

WO12864T是一款單色128x64點陣式COG繪圖型LCD液晶顯示器模組。此款COG LCD模組內建ST7565P IC, 支援 8-bit 6800, 8-bit 8080 平行介面與4線SPI串列介面。WO12864T的模組外觀尺寸與WX12864T2相同,但是兩者VA區尺寸與AA區尺寸稍微有些差異,驅動電壓同樣都是3.3V (VDD),VOP同樣是9.1V,主要電氣特性相同。WO12864T是TAB結構WX12864T2的替代方案,此款型號的TAB IC已經停產,原本使用TAB 結構WX12864T2產品應用建議可以改用此款COG 結構WO12864T替代。

WO12864T的工作溫度是-20℃至+70℃,儲存溫度-30℃至+80℃。WO12864T型號目前有FSTN positive玻璃可供選擇,搭配LED白光,如有需求其他LCD或是LED背光組合可與我們聯繫。

 

規格圖

WO12864T

產品規格

Pin功能定義

Pin No. 符號 I/O 說明
1 VDD _ Power supply pin for logic.
2 VSS _ Ground pin, connected to 0V
3 /CS1 I Chip select input pin. Interface access is enabled when CS1B is "L" and CB2 is "H". When chip is on-active (CS1B="H" or CS2="L"), D[7:0] pins are high impedance.
4 CS2
5 /RES I Hardware reset input pin. When RSTB is "L", internal initialization is executed and the internal registers will be initialized.
6 A0 I It determines whether the access is related to data or command.
A0="H": Indicates that signals on D[7:0] are display data.
A0="L": Indicates that signals on D[7:0] are command.
7 R/W I Read/Write execution control pin. When PSB is "H",
RWR is not used in serial interface and should fix to "H" by VDD.
C86 MPU Type RWR Description
H 6800 series R/W Read/Write control input pin.
R/W="H":read
R/W="L":write.
L 8080 series /WR Write enable input pin.
Signals on D[7:0] will be latched at the rising edge of /WR signal.
 
8 E I Read/Write execution control pin. When PSB is "H",
C86 MPU Type ERD Description
H 6800 series E Read/Write control input pin.
R/W="H": When E is "H", D[7:0] are in output mode.
R/W="L": Signals on D[7:0] are latched at the falling edge of E signal
L 8080 series /RD Read enable input pin.
When /RD is "L", D[7:0] are in output mode.

ERD is not used in serial interface and should fix to "H" by VDD.
9-16 D0-D7 I/O Data bus line
17 C86 I C86 selects the microprocessor type in parallel interface mode.
PSB C86 Selected Interface
"H" "H" Parallel 6800 Series MPU Interface
"H" "L" Parallel 8080 Series MPU Interface
"L" "X" Serial 4-Line SPI Interface

Please refer to "APPLICATION NOTES" and "Microprocessor Interface" (Section 6) for detailed connection of the selected interface.
18 P/S I PSB selects the interface type: Serial or Parallel.

規格說明

項目 規格 單位
點陣(解析度) 128 × 64
模組尺寸 38.0 × 26.42 × 8.8 mm
檢視區域 29.58 × 16.22 mm
有效區域 25.58 × 14.06 mm
點大小 0.18 × 0.20 mm
點間距 0.20 × 0.22 mm
驅動方式 1/65 DUTY,1/9 BIAS
背光類型 LED
IC ST7565P

最大絕對額定值

項目 符號 最小值 典型值 最大值 單位
工作溫度 TOP -20 +70
儲存溫度 TST -30 +80
電源電壓 VDD -0.3 3.6 V
電源電壓 (標準VDD) V0, VOUT -0.3 14.5 V
電源電壓 (標準VDD) V1, V2, V3, V4 -0.3 V0+0.3 V

電氣特性

項目 符號 條件 最小值 典型值 最大值 單位
邏輯電源電壓 VDD-VSS 3.0 3.3 V
LCD供電電壓 VOP Ta=-20℃
Ta=25℃
Ta=70℃

8.9

9.1

9.3
V
V
V
輸入高電壓 VIH 0.8 VDD VDD V
輸入低電壓 VIL Vss 0.2 VDD V
輸出高電壓 VOH 0.8 VDD VDD V
輸出低電壓 VOL Vss 0.2 VDD V
供電電流 IDD VDD=3.3V 2.0 mA
 

Search Keyword: lcd 128x64, lcd 128 x 64, 128x64 lcd, 128 x 64 lcd

go top
close