OLED Display 128x128 de 1,5 polegadas, OLED 128x128 - WEO128128A

OLED Display 128x128 de 1,5 polegadas

Model No. WEO128128A

►Tipo: Gráfico
►Estrutura: COG
►Tamanho: 1,5 polegadas
►Matriz de pontos 128x128
►IC：SSD1327
►Alimentação 3V
►1/128 duty
►Interface: 6800, 8080, SPI, I2C
►Display Color: Branco / Amarelo
►Gri Tonlama Desteği
►Aşağıdaki tabloda bulunan diğer FPC seçenekleri

PDF DOWNLOAD

DEMO CODE ADD TO INQUIRY

PREV. BACK to LIST NEXT

Descrição

WEO128128A é um display OLED gráfico COG 128x128 pontos de 1,5 polegadas. Este módulo tem dimensão de módulo de 33,8 x 36,5 mm e área ativa de 26,86 x 26,86 mm. O Diodo Emissor de Luz Orgânica (OLED da sigla em inglês) é uma tecnologia da nova geração, com imagens mais brilhantes e claras e com uma velocidade de resposta mais ágil.

Este display OLED 128x128 de 1,5" está integrado com o IC SSD1327, suporta interface 6800, 8080, SPI 4 fios e I2C , 1/128 para o acionamento, relação de contraste (valor típico) de 10,000:1. Esta série de módulos pode operar a temperaturas de -40℃ a +80℃; suas temperaturas de armazenamento variam de -40℃ a +85℃.

Este módulo é um display COG OLED de tamanho pequeno, ultra-fino, leve e com baixo consumo de energia. Ele é muito adequado para aplicações domésticas inteligentes, dispositivos médicos, dispositivos portáteis e dispositivos vestíveis.

FPC Options

DRAWING

OLED Display 128x128, 128x128 OLED Display, 128x128 pixel OLED Module - WEO128128A

Data source ref: WEO128128ALAP3N00000

SPECIFICATIONS

Especificações Gerais

Item	Dimensão	Unidade
Matriz de pontos	128 x 128 Pontos	－
Dimensão do módulo	33.80 x 36.50 x 2.05	mm
Área ativa	26.86 x 26.86	mm
Tamanho do ponto	0.185 x 0.185	mm
Distância entre pontos	0.210 x 0.210	mm
Modo de exibição	Passive Matrix
Cor de exibição	Monochrome
Drive Duty	1/128 Duty
Gray Scale	4 bits
IC	SSD1327
Interface	6800,8080,SPI,I2C
Tamanho	1,5 polegadas

Classificações Máximas Absolutas

Parameter	Símbolo	Valor Min	Valor Máximo	Unidade
Low voltage power supply, power supply for I/O pins	VCI	-0.3	4.0	V
Supply Voltage for Logic	VDD	-0.5	2.75	V
Supply Voltage for Display	VCC	-0.5	19.0	V
Temperatura de operação	TOP	-40	+80	°C
Temperatura de armazenamento	TSTG	-40	+85	°C

Características Eletrônicas

DC Características Eletrônicas

Item	Símbolo	Condição	Valor Min	Valor Típico	Valor Máximo	Unidade
Low voltage power supply, power supply for I/O pins	VCI		2.8	3	3.3	V
Supply Voltage for Display	VCC	－	14	14.5	15	V
Supply Voltage for Logic	VDD	－	2.4	－	2.6	V
High Level Input	VIH	－	0.8×VCI	－	VCI	V
Low Level Input	VIL	－	0	－	0.2×VCI	V
High Level Output	VOH	－	0.9×VCI	－	VCI	V
Low Level Output	VOL	－	0	－	0.1×VCI	V
50% Check Board operating Current		VCC =14.5V	－	24	36	mA

Função do pino de interface

No.

Símbolo

Função

VSS

Ground pin. It must be connected to external ground.

VCC

Power supply for panel driving voltage. This is also the most positive power voltage supply pin. It is supplied by external high voltage source.

VCOMH

COM signal deselected voltage level.
A capacitor should be connected between this pin and VSS. No external power supply is allowed to connect to this pin.

VCI

Low voltage power supply and power supply for interface logic level. It should match with the MCU interface voltage level and must be connected to external source.
VCI must always set to be equivalent to or higher than VDD.

VDD

Power supply pin for core logic operation.
VDD can be supplied externally (within the range of 2.4V to 2.6V) or regulated
Internally from VCI. A capacitor should be connected between VDD and VSS under all circumstances.

BS1

MCU bus interface selection pins. Select appropriate logic setting as described in the following table. BS2 and BS1 are pin select.
Bus Interface selection

BS[2:1]	Interface
00	4 line SPI
01	I2C
11	8-bit 8080 parallel
10	8-bit 6800 parallel

Note (1) 0 is connected to VSS (2) 1 is connected to VCI

BS2

VSS

Ground pin. It must be connected to external ground.

IREF

This pin is the segment output current reference pin

CS#

This pin is the chip select input connecting to the MCU.
The chip is enabled for MCU communication only when CS# is pulled LOW (active LOW).

RES#

This pin is reset signal input.
When the pin is pulled LOW, initialization of the chip is executed.
Keep this pin pull HIGH during normal operation.

D/C

This pin is Data/Command control pin connecting to the MCU.
When the pin is pulled HIGH, the data at D[7:0] will be interpreted as data.
When the pin is pulled LOW, the data at D[7:0] will be transferred to a command register.
In I2C mode, this pin acts as SA0 for slave address selection.

W/R#

This pin is read / write control input pin connecting to the MCU interface.
When 6800 interface mode is selected, this pin will be used as Read/Write (R/W#) selection input. Read mode will be carried out when this pin is pulled HIGH and write mode when LOW.
When 8080 interface mode is selected, this pin will be the Write (WR#) input. Data write operation is initiated when this pin is pulled LOW and the chip is selected.