Startseite Produkte OLED-Anzeige Grafik-OLED-Anzeigen WEA012864D-01

SSD1606 (COG+PCB) OLED-Modul 128x64, 0,96 Zoll

Modellnummer WEA012864D-01

►0,96" OLED
►Typ: Grafik
►Bauweise: COG+PCB
►128 x 64 Punktmatrix
►IC:SSD1306
►3-V/5-V-Stromversorgung
►1/64 duty
►Schnittstelle: I2C,SPI
►die Farbe des Displays: Weiß / Gelb / Himmelblau
►Geeignet für Tragbare Geräte

Beschreibung

Winstar stellt zwei neue COG-Strukturierte OLEDs mit PCB-Platine vor: das WEA012864D-01 und das WEA012864D-03. Diese beiden OLED-Panels haben eine Diagonale von 0,96 Zoll und 128 x 64 Pixel. Das WEA012864D-01 ist mit dem IC SSD1306 ausgestattet, das die I2C (Standard), optional auch die SPI-Schnittstelle unterstützt, ist mit einer Umwandlungsschaltung eingebaut und hat eine 3V/5V VCC, einen 3V bis 5V E/A Pegel und einen 1/64 Arbeitszyklus. Das WEA012864D-01 hat eine Abmessung von 38,0 x 28,5 x 2,37 mm und es 4 Befestigungsbohrungen und 8 Metallpins an der Platine.

Dieses 0,96"-OLED-Modul eignet sich für intelligente Steuerungsgeräte, Smart-Home-Anwendungen, medizinische Geräte usw. Das Modul ist in Farbe Weiß, Gelb oder Blau erhältlich. Es kann bei Temperaturen von -40 ℃ bis + 80 ℃ betrieben werden. Die Lagertemperatur liegt zwischen -40 °C und +85 °C.

 

Zeichnung

12864 OLED, OLED Display Module 12864, OLED 12864

Data source ref: WEA012864DWPP3N00001

Technische Daten

Schnittstelle Pin-Funktion

No. Symbol Beschreibung
1 SDA When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN.
When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL.
2 SCL
3 SA0 In I2C mode, this pin acts as SA0 for slave address selection.
When 3-wire serial interface is selected, this pin must be connected to VSS.
4 RST This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed.
Keep this pin HIGH (i.e. connect to VDD) during normal operation.
5 CS This pin is the chip select input. (active LOW).
6 VDD 3.0V Power supply pin for core logic operation.
7 VIN 5.0V Power supply pin for core logic operation.
8 GND This is a ground pin.

mechanische Daten

Artikel Ausmaß Einheit
Punktmatrix 128 × 64 Dots
Abmaße der modul 38,00 × 28,50 × 2,37 mm
Aktiver Bereich 21,74 × 10,86 mm
Pixelgröße 0,148 × 0,148 mm
Pixelabstand 0,17 × 0,17 mm
der Anzeigemodus Passive Matrix
die Farbe des Displays Monochrome
Drive Duty 1/64 Duty
IC SSD1306
Schnittstelle I2C, SPI
Größe 0,96 Zoll

absolute Grenzwerte

Parameter Symbol Mindestwert Maximalwert Einheit
Supply Voltage for Logic VDD 1,65 3,3 V
Supply Voltage for Logic VIN 4,0 6,0 V
Operating Temperature TOP -40 +80 °C
Storage Temperature TSTG -40 +85 °C

elektronische Eingenschaften

Artikel Symbol Bedingung Mindestwert typischer Wert Maximalwert Einheit
Supply Voltage for Logic (3V) VDD 2,8 3,0 3,2 V
Supply Voltage for Logic (5V) VIN 4,8 5,0 5,2 V
Input High Volt. VIH 0,8×VDD VDDIO V
Input Low Volt. VIL 0 0,2×VDD V
Output High Volt. VOH 0,9×VDD VDDIO V
Output Low Volt. VOL 0 0,1×VDD V
50% Check Board operating Current ICC Vcc=7.5V 12,0 22,0 mA
go top
close