Modelo Nº WEA012864D-01
►Tipo : Gráfico
►Estructura : COG+PCB
►Tamaño : 0.96 pulgada
►Matriz de puntos 128 x 64
►IC：SSD1306
►Fuente de alimentación de 3V/5V
►1/64 duty
►Interfaz : I2C,SPI
►Color de la pantalla: Blanco / Amarillo / Azul cielo
| No. | Símbolo | Función |
|---|---|---|
| 1 | SDA | When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN. When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL. |
| 2 | SCL | |
| 3 | SA0 | In I2C mode, this pin acts as SA0 for slave address selection. When 3-wire serial interface is selected, this pin must be connected to VSS. |
| 4 | RST | This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed. Keep this pin HIGH (i.e. connect to VDD) during normal operation. |
| 5 | CS | This pin is the chip select input. (active LOW). |
| 6 | VDD | 3.0V Power supply pin for core logic operation. |
| 7 | VIN | 5.0V Power supply pin for core logic operation. |
| 8 | GND | This is a ground pin. |
| Elemento | Dimensión | Unidad |
|---|---|---|
| Matriz de puntos | 128 × 64 | Dots |
| Dimensión del módulo | 38.00 × 28.50 × 2.37 | mm |
| zona activa | 21.74 × 10.86 | mm |
| Tamaño del punto | 0.148 × 0.148 | mm |
| Distancia entre puntos | 0.17 × 0.17 | mm |
| Modo de visualización | Matriz pasiva | |
| Color de la pantalla | Monocromos | |
| Drive Duty | 1/64 Duty | |
| IC | SSD1306 | |
| Interfaz | I2C, SPI | |
| Tamaño | 0.96 pulgada | |
| Parameter | Símbolo | Valor mín. | Valor máx. | Unidad |
|---|---|---|---|---|
| Supply Voltage for Logic | VDD | 1.65 | 3.3 | V |
| Supply Voltage for Logic | VIN | 4.0 | 6.0 | V |
| Operating Temperature | TOP | -40 | +80 | °C |
| Storage Temperature | TSTG | -40 | +85 | °C |
| Elemento | Símbolo | Condición | Valor mín. | Valor típico | Valor máx. | Unidad |
|---|---|---|---|---|---|---|
| Supply Voltage for Logic (3V) | VDD | － | 2.8 | 3.0 | 3.2 | V |
| Supply Voltage for Logic (5V) | VIN | － | 4.8 | 5.0 | 5.2 | V |
| Input High Volt. | VIH | － | 0.8×VDD | － | VDDIO | V |
| Input Low Volt. | VIL | － | 0 | － | 0.2×VDD | V |
| Output High Volt. | VOH | － | 0.9×VDD | － | VDDIO | V |
| Output Low Volt. | VOL | － | 0 | － | 0.1×VDD | V |
| 50% Check Board operating Current | ICC | Vcc=7.5V | － | 12.0 | 22.0 | mA |
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.