0,71 Zoll I2C Mini-OLED-Display 48x64
Modellnummer WEO004864A
►Typ: Grafik
►Bauweise: COG
►Größe: 0,71 Zoll OLED
►48 x 64 Punktmatrix
►IC:SSD1306
►3-V-Stromversorgung
►1/64 duty
►Schnittstelle: I2C
►Geeignet für Tragbare Geräte
►die Farbe des Displays: Weiß / Gelb
►Andere in der nachstehenden Tabelle verfügbare FPC-Optionen
Beschreibung
Das WEO004864A ist ein kleines Grafik-PMOLED-Display mit einer Auflösung von 48x64 Pixeln. Die Diagonale beträgt 0,71 Zoll, die Modulgröße 13,90 × 22,0 mm und die aktive Fläche 10,54 × 14,70 mm. Es ist mit dem SSD1306 Controller ausgestattet, unterstützt I2C-Schnittstelle und hat eine Betriebsspannung von 3V. Das WEO004864A ist ein COG-PMOLED-Display; es ist extrem dünn und benötigt keine Hintergrundbeleuchtung (c). Es ist leicht und sparsam im Verbrauch. Dieses kleine Modul eignet sich für tragbare Geräte, MP3, Diktiergerät, Gesundheitsgeräte usw. Es ist in Weiß, Gelb und Himmelblau erhältlich. Dieses 0,71" WEO004864A Modul ist im Hochformat, unterstützt aber auch Querformat. Wenn Sie es als Querformat verwenden möchten, kontaktieren Sie uns für weitere technische Unterstützung.
Das WEO004864A kann bei Temperaturen von -40 ℃ bis + 80 ℃ betrieben werden; die Lagertemperatur liegt zwischen -40 °C und + 85 °C. Unten ist die kurze Spezifikation von WEO004864A als Referenz.
FPC-Optionen
Zeichnung
Data source ref: WEO004864AWPP3N00000
Technische Daten
Schnittstelle Pin-Funktion
No. | Symbol | Beschreibung |
---|---|---|
1 | C2N | Positive Terminal of the Flying Inverting Capacitorr Negative Terminal of the Flying Boost Capacitor The charge-pump capacitors are required between the terminals. They must be floated when the converter is not used. |
2 | C2P | |
3 | C1P | |
4 | C1N | |
5 | VBAT | Power Supply for DC/DC Converter Circuit This is the power supply pin for the internal buffer of the DC/DC voltage converter. It must be connected to external source when the converter is used. It should be connected to VDD when the converter is not used. |
6 | NC | No connection. |
7 | VSS | Ground of Logic Circuit This is a ground pin. It acts as a reference for the logic pins. It must be connected to external ground. |
8 | VDD | Power Supply for Logic This is a voltage supply pin. It must be connected to external source. |
9 | RES# | Power Reset for Controller and Driver This pin is reset signal input. When the pin is low, initialization of the chip is executed. |
10 | SCL | Host Data Input/Output Bus When serial mode is selected, D1 will be the serial data input SDIN and D0 will be the serial clock input SCLK. When I2C mode is selected, D2 & D1 should be tired together and serve as SDAout & SDAin in application and D0 is the serial clock input SCL. |
11 | SDA | |
12 | IREF | This is segment output current reference pin. When external IREF is used, a resistor should be connected between this pin and Vss to maintain the IREF current at a maximum of 30uA. When internal IREF is used, this pin should be kept NC |
13 | VCOMH | Voltage Output High Level for COM Signal This pin is the input pin for the voltage output high level for COM signals. A capacitor should be connected between this pin and VSS. |
14 | VCC | Power Supply for OEL Panel This is the most positive voltage supply pin of the chip. A stabilization capacitor should be connected between this pin and VSS when the converter is used. It must be connected to external source when the converter is not used. |
mechanische Daten
Artikel | Ausmaß | Einheit |
---|---|---|
Punktmatrix | 48 x 64 | Punkte |
Abmaße der modul | 13,90 x 22,0 x 1,26 | mm |
Anzeigebereich | 10,54 x14,70 | mm |
Punktgröße | 0,198 x 0,208 | mm |
Punktabstand | 0,220 x 0,230 | mm |
Display Mode | Passive Matrix | |
die Farbe des Displays | Monochrome | |
Drive Duty | 1/64 Duty | |
IC | SSD1306 | |
Schnittstelle | I2C | |
Diagonale | 0,71 Zoll |
Absolute Grenzwerte
Parameter | Symbol | Mindestwert | Maximalwert | Einheit |
---|---|---|---|---|
Supply Voltage for Logic | VDD | 0 | 4 | V |
Supply Voltage for Display | VCC | 0 | 15 | V |
Betriebstemperatur | TOP | -40 | +80 | °C |
Lagertemperatur | TSTG | -40 | +85 | °C |
elektronische Eingenschaften
Artikel | Symbol | Bedingung | Mindestwert | typischer Wert | Maximalwert | Einheit |
---|---|---|---|---|---|---|
Supply Voltage for Logic | VDD | - | 2,8 | 3 | 3,3 | V |
Supply Voltage for Display | VCC | - | 7,0 | 7,5 | 8,0 | V |
Input High Volt. | VIH | - | 0,8 xVDD | - | VDD | V |
Input Low Volt. | VIL | - | 0 | - | 0,2 xVDD | V |
Output High Volt. | VOH | - | 0,9 xVDD | - | VDD | V |
Output Low Volt. | VOL | - | 0 | - | 0,1 xVDD | V |
50% Check Board operating Current | ICC | VCC=7,5V | - | 15 | 25,0 | mA |
FPC-Optionen:
Bild | FPC Length | PIN | pitch | ZIF FPC or HOTBAR FPC | Schnittstelle | FPC No. | Create Date |
---|---|---|---|---|---|---|---|
16.0 | 14 | 0.7 | HOTBAR FPC | I2C | FPC2000701401XXXXX00 | 20160603 | |
11.2 | 14 | 0.7 | HOTBAR FPC | I2C | FPC2070001401XXXXX02 | 20180307 |