128x64 COG LCD顯示模組

型號 WO12864B

►COG LCD 顯示模組
►繪圖型
►解析度: 128x64
►IC: ST7565P
►3.3V電源電壓
►1/65 duty cycle
►WO12864B : 厚度 12.1mm (Max)
►WO12864B1: 厚度 6.0mm
►介面: 6800/8080/SPI

PDF下載

索取Demo Code 產品詢問

上一個產品回分類頁下一個產品

產品敘述

WO12864B 系列有兩種模組厚度可供選擇:
►WO12864B : 厚度 12.1mm (Max)
►WO12864B1 : 厚度 6.0mm

規格圖

Data source ref:WO12864B-TFH#

產品規格

Pin功能定義

Pin No.

符號

Level

說明

/CS1B

This is the chip select signal.

/RES

When RES is set to “L”, the setting are initialized.

This is connect to the least significant bit of the normal MPU address bus, and it determines whether the data bits are data or command.
A0 = “H”: Indicates that D0 to D7 are display data.
A0 = “L”: Indicates that D0 to D7 are control data.

/WR(R/W)

• When connected to 8080 series MPU, this pin is treated as the “/WR” signal of the 8080 MPU and is LOW-active.
The signals on the data bus are latched at the rising edge of the /WR signal.
• When connected to 6800 series MPU, this pin is treated as the “R/W” signal of the 6800 MPU and decides the access type :
When R/W = “H”: Read.
When R/W = “L”: Write.

/RD(E)

• When connected to 8080 series MPU, this pin is treated as the “/RD” signal of the 8080 MPU and is LOW-active.
The data bus is in an output status when this signal is “L”.
• When connected to 6800 series MPU, this pin is treated as the “E” signal of the 6800 MPU and is HIGH-active.
This is the enable clock input terminal of the 6800 Series MPU.

6~13

D0~D7

I/O

Data bus line

VDD

Power supply

VSS

Power supply

Ground

VOUT

DC/DC voltage converter. Connect a capacitor between this terminal and vss or VDD

CAP3P

DC/DC voltage converter. Connect a capacitor between this terminal and the CAP1N terminal.

CAP1N

DC/DC voltage converter. Connect a capacitor between this terminal and the CAP1P terminal.

CAP1P

DC/DC voltage converter. Connect a capacitor between this terminal and the CAP1N terminal.

CAP2P

DC/DC voltage converter. Connect a capacitor between this terminal and the CAP2N terminal.

CAP2N

DC/DC voltage converter. Connect a capacitor between this terminal and the CAP2P terminal.

22~26

V4~V0

Power supply

This is a multi-level power supply for the liquid crystal drive.

Output voltage regulator terminal. Provides the voltage between VSS and V0 through a resistive voltage divider.

C86

This is the MPU interface selection pin.
C86 = “H”: 6800 Series MPU interface.
C86 = “L”: 8080 Series MPU interface

P/S

This is the parallel data input/serial data input switch terminal.
P/S = “H”: Parallel data input.
P/S = “L”: Serial data input.
The following applies depending on the P/S status:

P/S	Data/Command	Data	Read/Write	Serial Clock
"H"	A0	D0 to D7	/RD,/WR	X
"L"	A0	SI(D7)	Write only	SCL(D6)

When P/S = “L”, D0 to D5 fixed “H”.
/RD (E) and /WR (R/W) are fixed to either “H” or “L”.
With serial data input, It is impossible read data from RAM

No connection.

規格說明

項目	標準尺寸	單位
點陣(解析度)	128 x 64	－
模組尺寸	89.7 x 49.8 x 11.8	mm
檢視區域	69.0 x 36.5	mm
有效區域	63.97 x 31.97	mm
點大小	0.47 x 0.47	mm
點間距	0.5 x 0.5	mm
驅動方式	1/65 , 1/9 Bias
背光類型	LED
IC	ST7565P
介面	6800/8080/4-Line SPI

最大絕對額定值

項目	符號	最小值	典型值	最大值	單位
工作溫度	TOP	-20	－	+70	℃
儲存溫度	TST	-30	－	+80	℃
電源電壓	VDD	-0.3	－	3.6	V
Power supply voltage (VDD standard)	V0,VOUT	-0.3	－	14.5	V
Power supply voltage (VDD standard)	V1,V2,V3,V4	-0.3	－	V0+0.3	V

電氣特性

項目	符號	條件	最小值	典型值	最大值	單位
邏輯電源電壓	VDD-VSS	－	2.7	－	3.3	V
LCM電源電壓	V0-VSS	Ta=-20℃ Ta=25℃ Ta=70℃	9.5 9.2 8.95	9.8 9.45 9.2	10.5 9.8 9.45	V V V
輸入高電壓	VIH	－	0.8 VDD	－	VDD	V
輸入低電壓	VIL	－	VSS	－	0.2VDD	V
輸出高電壓	VOH	IOUT=-0.5mA	0.8VDD	－	VDD	V
輸出低電壓	VOL	IOUT=0.5mA	VSS	－	0.2VDD	V
電源電流（不包括LED背光）	IDD	－	－	0.6	2.0	mA

Search Keyword: lcd 128x64, lcd 128 x 64, 128x64 lcd, 128 x 64 lcd

128x64 COG LCD顯示模組

產品敘述

規格圖

產品規格

Pin功能定義

規格說明

最大絕對額定值

電氣特性

我們重視您的隱私

我們重視您的隱私

管理同意聲明