我们重视您的隐私
通过点击「允许所有 Cookie」，代表您同意在您的设备上存储 Cookie 以增强网站浏览体验、分析网站使用情况并协助我们的营销和网站效能优化工作。您可以在我们的隐私权政策中找到有关于此的更多信息。
0.49寸 64x32 OLED模块
型号 WEO006432A
►类型:点阵图形
►结构:COG
►尺寸:0.49寸
►64x32点阵
►IC：SSD1306
►3V电源电压
►1/32 duty
►接口:I2C
►发光颜色: 白色 / 黄色
►尺寸适用于穿戴式电子产品
产品叙述
WEO006432A是一款微型0.49吋OLED显示器模块，分辨率64x32 dots。WEO006432A模块尺寸为14.5×11.6×1.26 mm， 有效区域尺寸为11.18×5.58 mm (对角线0.49吋)。WEO006432A内建SSD1306 IC, 支持I2C传输接口。使用3V电压驱动，驱动方式1/32 duty，支持内部升压及外部供电。模块具有10,000:1的高对比度度。此模块的工作温度是-40℃至+80℃，储存温度-40℃至+85℃。
WEO006432A为COG结构的OLED显示器模块，为有机自发光，无须背光源，模块轻薄且低耗电流。此款0.49吋OLED模块非常适合穿戴装置、手环、 MP3、 录音笔、小型手持式仪器、个人健康守护追踪装置等等。
规格图
Data source ref: WEO006432AWPP3N00000
产品规格
规格说明
| 项目 | 尺寸 | 单位 |
|---|---|---|
| 点阵(分辨率) | 64 x 32 | Dots |
| 模块尺寸 | 14.5 × 11.6 × 1.26 | mm |
| 有效区域 | 11.18 × 5.58 | mm |
| 点间距 | 0.153 × 0.153 | mm |
| 点大小 | 0.175 × 0.175 | mm |
| 显示模式 | 被动矩阵 | |
| 显示颜色 | 单色 | |
| 驱动方式 | 1/32 Duty | |
| IC | SSD1306 | |
| 介面 | I2C | |
| 尺寸 | 0.49寸 | |
最大绝对额定值
| 参数 | 符号 | 最小值 | 最大值 | 单位 |
|---|---|---|---|---|
| 逻辑电源电压 | VDD | 0 | 4 | V |
| 显示电源电压 | VCC | 0 | 15 | V |
| 工作温度 | TOP | -40 | +80 | °C |
| 储存温度 | TSTG | -40 | +85 | °C |
电气特性
| 项目 | 符号 | 条件 | 最小值 | 典型值 | 最大值 | 单位 |
|---|---|---|---|---|---|---|
| 逻辑电源电压 | VDD | － | 1.65 | 3.0 | 3.3 | V |
| 电荷帮浦稳压器电源电压 | VBAT | － | 3.0 | － | 4.2 | V |
| 显示电源电压 (Supplied Externally) | VCC | 6.0 | 7.5 | 8.0 | V | |
| 显示器的电荷帮浦输出电压(Generated by Internal DC/DC) | Charge Pump VCC |
－ | 7.0 | 7.5 | － | V |
| 输入高电压 | VIH | － | 0.8×VDD | － | VDD | V |
| 输入低电压 | VIL | － | 0 | － | 0.2×VDD | V |
| 输出高电压 | VOH | － | 0.9×VDD | － | VDD | V |
| 输出低电压 | VOL | － | 0 | － | 0.1×VDD | V |
| 50%显示画面耗电流 (VCC Supplied Externally) | ICC | － | － | 3 | 6 | mA |
| 50%显示画面耗电流 (VCC Generated by Internal DC/DC) | IBAT | － | － | 5 | 20 | mA |
Pin功能定义
| No. | 符号 | 功能说明 |
|---|---|---|
| 1 | C2N | C2P/C2N – Pin for charge pump capacitor; Connect to each other with a capacitor. C1P/C1N – Pin for charge pump capacitor; Connect to each other with a capacitor |
| 2 | C2P | |
| 3 | C1P | |
| 4 | C1N | |
| 5 | VBAT | This is the power supply pin for the internal buffer of the DC/DC voltage converter. It must be connected to external source when the converter is used. It should be connected to VDD or kept float when the converter is not used. |
| 6 | NC | No connection. |
| 7 | VSS | This is a ground pin. |
| 8 | VDD | Power supply pin for core logic operation. |
| 9 | RES# | This pin is reset signal input. When the pin is low, initialization of the chip is executed. Keep this pin HIGH (i.e. connect to VDD) during normal operation. |
| 10 | SCL | The serial clock input |
| 11 | SDA | The serial data input/output |
| 12 | IREF | This is segment output current reference pin. When external IREF is used, a resistor should be connected between this pin and Vss to maintain the IREF current at a maximum of 30uA. When internal IREF is used, this pin should be kept NC. |
| 13 | VCOMH | The pin for COM signal deselected voltage level. A capacitor should be connected between this pin and VSS. |
| 14 | VCC | This is the most positive voltage supply pin. When charge pump is enabled, a capacitor should be connected between this pin and VSS. |