Model No. WEO020636A
►Tipo: Gráfico
►Estrutura: COG
►Tamanho: 2.55 polegadas
►Matriz de pontos 206 x 36
►IC：SSD1362
►Alimentação 3V
►1/36 duty
►Interface: SPI
►Display Color: Branco
►Suporte em escala de cinza
Descubra a série WEO020636A, o primeiro módulo OLED de 2,55 polegadas da Winstar com resolução de 206x36 pontos. Este display OLED gráfico COG (Chip on Glass) possui dimensões externas de 70,77 x 15,14 mm e área ativa de 63,84 x 11,14 mm, oferecendo uma representação visual precisa.
O display OLED WEO020636A é ideal para aplicações incluindo amplificadores de fones de ouvido DAC portáteis, estações de energia portáteis e aplicações de rádio. Seu tamanho compacto e excepcional clareza visual o tornam adequado para dispositivos móveis, equipamentos industriais, dispositivos médicos e eletrônicos de consumo. A estrutura COG do display e compatibilidade com interfaces SPI e I2C facilitam integração perfeita em diferentes ambientes digitais.
Seja melhorando interfaces de usuário em dispositivos portáteis ou fornecendo feedback visual crítico em ambientes industriais, o WEO020636A garante desempenho confiável e durabilidade em uma ampla faixa de temperatura.
| No. | Símbolo | Função | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | VCC | Power supply for panel driving voltage. This is also the most positive power voltage supply pin. It is supplied by external high voltage source. | ||||||||
| 2 | VCOMH | COM signal deselected voltage level. A capacitor should be connected between this pin and VSS. No external power supply is allowed to connect to this pin. |
||||||||
| 3 | VP | This pin is the segment pre-charge voltage reference pin. A capacitor should be connected between this pin and VSS. No external power supply is allowed to connect to this pin. |
||||||||
| 4 | VSL | This is a reserved pin. It should be connected to VLSS externally. | ||||||||
| 5 | VLSS | Analog system ground pin. It must be connected to external ground. | ||||||||
| 6 | VDD | VDD can be supplied externally (within the range of 1.65V to 2.6V) or regulated internally from VCI when VCI is >2.6V.A capacitor should be connected between VDD and VSS under all circumstances. | ||||||||
| 7 | VCI | Low voltage power supply. VCI must always be equal to or higher than VDD and VDDIO. |
||||||||
| 8 | VDDIO | Power supply for interface logic level. It should match with the MCU interface voltage level and must be connected to external source. | ||||||||
| 9 | CS# | This pin is the chip select input connecting to the MCU. The chip is enabled for MCU communication only when CS# is pulled Low (active Low).In I2C mode, this pin must be connected to VSS. |
||||||||
| 10 | RES# | This pin is reset signal input. When the pin is pulled Low, initialization of the chip is executed. Keep this pin pull HIGH during normal operation. |
||||||||
| 11 | D/C# | This pin is Data/Command control pin connecting to the MCU. When the pin is pulled HIGH, the data will be interpreted as data. When the pin is pulled LOW, the data will be transferred to a command register. In I2C mode, this pin acts as SA0 for slave address selection. When 3-wire serial interface is selected, this pin must be connected to VSS. |
||||||||
| 12 | D0 | These pins are bi-directional data bus connecting to the MCU data bus. Unused pins are recommended to tie Low. When serial interface mode is selected,D0 will be the serial clock input: SCLK;D1 will be the serial data input: SID. When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL. |
||||||||
| 13 | D1 | |||||||||
| 14 | D2 | |||||||||
| 15 | BS0 | MCU bus interface selection pins.
|
||||||||
| 16 | BS1 | |||||||||
17 |
VSS | Ground pin. | ||||||||
| 18 | IREF | When external IREF is used, a resistor should be connected between this pin and VSS to maintain current of around 18.75uA. When internal IREF is used, this pin should be kept NC. |
||||||||
| 19~20 | VCC | Power supply for panel driving voltage. This is also the most positive power voltage supply pin. It is supplied by external high voltage source. |
| Item | Dimensão | Unidade |
|---|---|---|
| Matriz de pontos | 206 x 36 pontos | － |
| Dimensão do módulo | 70.77 x 15.14 x 2.01 | mm |
| Área ativa | 63.84 x 11.14 | mm |
| Tamanho do ponto | 0.29 x 0.29 | mm |
| Distância entre pontos | 0.31 x 0.31 | mm |
| Modo de exibição | Passive Matrix | |
| Cor de exibição | Monochrome | |
| Duty | 1/36 Duty | |
| Escala cinza | 4 Bits | |
| IC | SSD1362 | |
| Interface | 3-Wire SPI、4-Wire SPI、I2C | |
| Tamanho(diagonal) | 2.55 polegadas | |
| Item | Símbolo | Valor Min | Máximo | Unidade |
|---|---|---|---|---|
| Supply Voltage | VDD | -0.5 | 2.75 | V |
| Supply Voltage | VCI | -0.3 | 5.5 | V |
| Supply Voltage | VDDIO | -0.5 | 5.5 | V |
| Supply Voltage | VCC | 7 | 21 | V |
| Temperatura de operação | TOP | -40 | +80 | °C |
| Temperatura de armazenamento | TSTG | -40 | +85 | °C |
| Item | Símbolo | Condition | Min | Típico | Máximo | Unidade |
|---|---|---|---|---|---|---|
| Supply Voltage for Display | VCC | － | 10.0 | 12.0 | 12.5 | V |
| Low voltage power supply | VCI | － | 1.65 | － | 3.5 | V |
| Power supply for I/O pins | VDDIO | － | 1.65 | － | VCI | V |
| Logic Supply Voltage | VDD | － | 1.65 | － | 2.6 | V |
| High Level Input | VIH | － | 0.8×VDDIO | － | － | V |
| Low Level Input | VIL | － | － | － | 0.2×VDDIO | V |
| High Level Output | VOH | － | 0.9×VDDIO | － | － | V |
| Low Level Output | VOL | － | － | － | 0.1×VDDIO | V |
| Display 50% Pixel on | ICC | VCC =12V | － | 25 | 35 | mA |
Search keyword: 206x36 oled, oled 206x36, 2.55" oled, 2.55 polegadas oled, oled 2.55"
By clicking "Allow All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing and performance efforts. You can find further information this subject in our policy.