Display OLED COG SSD1306 de 1,04" com PCB
Model No. WEA012832E
►Tipo: Gráfico
►Estrutura: COG+PCB
►Tamanho: 1,04 polegadas
►Matriz de pontos 128x32
►IC:SSD1306
►Alimentação 3V
►1/32 duty
►Interface: SPI
►Display Color: Branco / Amarelo
►Traditional Chinese / Simplified Chinese version options
Descrição
WEA012832E é um display OLED de 1,04 polegadas está integrado com o IC SSD1306, suporta interface SPI. Este módulo tem dimensão de módulo de 35,4 x 23,5 mm e área ativa de 25,58 x 6,38 mm; ele tem tamanho diagonal de 1,04 polegadas e fabricado com resolução de 128 x 32 pixéis. O modelo é apresentado com a opção de IC GT21L16T1W que suporta o Caracter Chinês Tradicional e o IC GT21L16S2W que.
WEA012832E é um display OLED com placa PCB; O módulo é OLED de estrutura COG e tem as vantagens de serem módulos facilmente fixados nas aplicações dos clientes devido às suas placas de circuito impresso.
Esta série OLED display de SSD1306 pode operar a temperaturas de -40℃ a +80℃; suas temperaturas de armazenamento variam de -40℃ a +85℃. A tensão de alimentação para a lógica é de 3V ou 5V, 1/32 Duty.
DRAWING
Data source ref: WEA012832EWPP3N00000
SPECIFICATIONS
Função do pino de interface
No. | Símbolo | Função |
---|---|---|
1 | SDI | Serial data input This pin connects font IC of SDI and OLED drive IC of SDI. |
2 | SCL | Serial clock input This pin connects font IC of SCL and OLED drive IC of SCL. |
3 | DC | This is Data/Command control pin. |
4 | RES | This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed. |
5 | CS | This pin is the chip select input. (active LOW). |
6 | VIN | Input voltage for 2.8 ~ 5.2V power supply. |
7 | GND | This is a ground pin. |
8 | SDO | Serial Data Output for font IC. Data is shifted out on the falling edge of the serial clock. |
9 | CS_G | Chip Select input for font IC. This pin is the chip select input. (active LOW). |
10 | NC | Not connection |
Dados Mecânicos
Item | Dimensão | Unidade |
---|---|---|
Matriz de pontos | 128 x 32 | Pontos |
Dimensão do módulo | 35.4 × 23.5 × 1.8 | mm |
Área ativa | 25.58 × 6.38 | mm |
Tamanho do ponto | 0.176 × 0.176 | mm |
Distância entre pontos | 0.200 × 0.200 | mm |
Modo de exibição | Passive Matrix | |
Cor de exibição | Monochrome | |
Drive Duty | 1/32 Duty | |
IC | SSD1306 | |
Font IC | GT21L16T1W (Traditional Chinese) / GT21L16S2W (Simplified Chinese) | |
Interface | SPI | |
Tamanho | 1,04 polegadas |
Classificações Máximas Absolutas
Parameter | Símbolo | Valor Min | Valor Máximo | Unidade |
---|---|---|---|---|
Supply Voltage for input | VIN | 2 | 7 | V |
Temperatura de operação | TOP | -40 | +80 | °C |
Temperatura de armazenamento | TSTG | -40 | +85 | °C |
Características Eletrônicas
Item | Símbolo | Condição | Valor Min | Valor Típico | Valor Máximo | Unidade |
---|---|---|---|---|---|---|
Supply Voltage for Input | VIN | - | 2.8 | 3.0 | 5.2 | V |
Input High Volt. | VIH | - | 2.4 | - | 3.2 | V |
Input Low Volt. | VIL | - | 0 | - | 0.6 | V |
Output High Volt. | VOH | - | 2.7 | - | 3.2 | V |
Output Low Volt. | VOL | - | 0 | - | 0.3 | V |
50% Check Board operating Current | IIN | VIN=3V | - | 13.0 | 26.0 | mA |