Home Products TFT LCD TFT Panel + Controller Board WF101JSYJHLNB0

10.1 inch High Brightness IPS TFT Display with PCAP

Model No. WF101JSYJHLNB0

►Size : 10.1 inch
►Resolution : 1024×600 dots
►View Direction : IPS
►Interface : LVDS
►Driver IC : EK79001HN + EK73215BCGA
►Control-Board : YES
►Brightness(cd/m2) : 900
►Frame Through Hole : No
►Touch Screen : Projected Capacitive Touch Panel (PCAP)
►Detect Point : 5 Fingers

Description

WF101JSYJHLNB0 is a 10.1-inch IPS TFT-LCD module with Projected Capacitive Touchscreen (PCAP). This TFT-LCD module, built-in with EK79001HN and EK73215BCGA ICs, supports LVDS interface with resolution of 1024 x 600 pixels. WF101JSYJHLNB0 is featured with an IPS panel that has the advantage of wider view angle of Left:85 / Right:85 / Up:85 / Down:85 degrees; with high brightness of 900 nits (typical value), contrast ratio: 800:1, glare surface panel, the aspect ratio of 16:9.

This model featured a projected capacitive touch panel (PCAP), which is built-in with ILI2511 IC and supports USB interface (I2C available). WF101JSYJHLNB0 module can operate at temperatures from -20℃ to+ 70℃ and storage temperatures from -30℃ to +80℃.

DRAWING

SPECIFICATIONS

Interface

TFT LCD Module

Pin No. Symbol Description
1-3 DC12V Digital power
4 NC No connection
5-8 GND Digital ground
8 Rxin0- Negative LVDS differential data inputs
9 Rxin0+ Positive LVDS differential data inputs
10 GND Digital ground
11 Rxin1- Negative LVDS differential data inputs
12 Rxin1+ Positive LVDS differential data inputs
13 GND Digital ground
14 Rxin2- Negative LVDS differential data inputs
15 Rxin2+ Positive LVDS differential data inputs
16 GND Digital ground
17 RxCLK- Negative LVDS differential clock inputs
18 RxCLK+ Positive LVDS differential clock inputs
19 GND Digital ground
20 Rxin3- Negative LVDS differential data inputs
21 Rxin3+ Positive LVDS differential data inputs
22 GND Digital ground
23 LED_PWM Backlight control signal
24 USB_DC5V Power supply for PCAP (USB type)
25 DC3V Power supply for PCAP (I2C Type)
26 USB_D+ Data + (PCAP)
27 GND Digital ground
28 SDA I2C data input and output (PCAP)
29 SCL I2C clock input (PCAP)
30 INT External interrupt to the host (PCAP)
31 RST External Reset, Low is active (PCAP)
32 GND Digital ground
33 USB_D- Data - (PCAP)
34-43 NC No connection
44-46 GND Digital ground
47 NC No connection
48-50 DC12V Digital power

General Specifications

Item Dimension Unit
Size 10.1 inch
Dot Matrix 1024 RGB x 600 dots
Module dimension 235(W) x 143(H) x 22.43(D) mm
Active area 222.72 (H) x 125.28(V) mm
Pixel pitch 0.2175(W) x 0.2088(H) mm
LCD type TFT, Normally Black, Transmissive
Interface LVDS
Driver IC EK79001HN + EK73215BCGA or Equivalent
Viewing Angle 85/85/85/85
Aspect Ratio 16:9
Backlight Type LED, Normally White
PCAP IC ILI2511 or Equivalent
PCAP Interface USB (I2C available)
PCAP FW Version V6.0.0.0.62.90.1.2
Touch Panel Projected Capacitive Touch Screen, PCAP
Surface Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

1.Typical Operation Conditions (At Ta = 25 °C)

Item Symbol Min. Typ. Max. Unit
Supply Voltage For LCM +12V DC12V - 12.0 - V
Supply Current For LCM +12V IDC12V - 650 980 mA
Supply Voltage For PCAP(I2C) DC3V 3.15 3.3 3.45 V
Supply Current For PCAP (I2C) IDC3V - 80 120 mA
Supply PCAP USB_DC 5V 4.75 5.0 5.25 V
IUSB_DC 5V - 100 100 mA
 

2. Backlight Driving Conditions

Parameter Symbol Min Typ Max Unit
PWM Control Level (LED_PWM) High Level - 3.3 - V
Low Level - 0 - V
PWM Control Duty Ratio - 1 - 100 %
PWM Control Frequency - - 10K - Hz
LED Life Time - 50,000 - - Hr
go top
close