Home Products TFT LCD TFT Panel + Controller Board WF101KTYJPLNG0
10 inch IPS TFT LCD 1280x800 with PCAP Touch - WF101KTYJPLNG0
10 inch IPS TFT LCD 1280x800 with PCAP Touch - WF101KTYJPLNG0

10.1 inch IPS TFT LCD 1280x800 with PCAP Touch

Model No. WF101KTYJPLNG0

►Size : 10.1 inch
►Resolution : 1280×800 dots
►View Direction : IPS
►Interface : LVDS
►Controller IC：EK79202B1
►Control-Board : YES
►Brightness (cd/m²): 300
►Frame Through Hole: No
►Touch Screen : Projected Capacitive Touch Panel (PCAP)
►Detect Point : 5 Fingers

PREV. BACK to LIST NEXT

Description

WF101KTYJPLNG0 is a 10.1-inch IPS TFT-LCD module with Projected Capacitive Touchscreen (PCAP). This TFT-LCD module, built-in with EK79202B1, supports LVDS interface with a high resolution of 1280 x 800 (WXGA) pixels, brightness of 300 nits, and a contrast ratio: of 1000:1. WF101KTYJPLNG0 is featured with IPS panel which having the advantages of the wider viewing angle of Left:80 / Right:80 / Up:80 / Down:80 degree (typical) and having HD resolution (1280 horizontal by 800 vertical pixels).

This model featured a projected capacitive touch panel (PCAP), glare surface for cover lens , which is built-in with GT928 IC and supports I2C interface. The power voltage for this module is DC 12V. WF101KTYJPLNG0 is very suitable for HMI (Human-machine Interaction) applications, POS systems, etc.

DRAWING

10 inch IPS TFT LCD 1280x800 with PCAP Touch - WF101KTYJPLNG001
10 inch IPS TFT LCD 1280x800 with PCAP Touch - WF101KTYJPLNG002

SPECIFICATIONS

Interface

LCM PIN Definition

Pin No. Symbol I/O Function
1 DC12V P Power Supply
2 DC12V P Power Supply
3 DC12V P Power Supply
4 NC - No connection
5 GND P Ground
6 GND P Ground
7 GND P Ground
8 Rxin0- I -LVDS Differential Data Input
9 Rxin0+ I +LVDS Differential Data Input
10 GND P Ground
11 Rxin1- I -LVDS Differential Data Input
12 Rxin1+ I +LVDS Differential Data Input
13 GND P Ground
14 Rxin2- I -LVDS Differential Data Input
15 Rxin2+ I +LVDS Differential Data Input
16 GND P Ground
17 RxCLK- I -LVDS Differential Clock Input
18 RxCLK+ I +LVDS Differential Clock Input
19 GND P Ground
20 Rxin3- I -LVDS Differential Data Input
21 Rxin3+ I +LVDS Differential Data Input
22 GND P Ground
23 PWM   This pin is connected to the external LED driver. PWM type control signal for brightness of the LED backlight. If not used, please float this pin.
24 NC - No connection
25 DC3V P Power Supply
26 NC - No connection
27 GND P Ground
28 SDA I/O Serial communication data input.
29 SCL I Serial communication clock input
30 INT O External interrupt to the host
31 RST I External Reset, Low is active
32 GND P Ground
33~43 NC - No connection
44 GND P Ground
45 GND P Ground
46 GND P Ground
47 NC - No connection
48 DC12V P Power Supply
49 DC12V P Power Supply
50 DC12V P Power Supply
 

General Specifications

Item Dimension Unit
Screen Diagonal 10.1 inch
Number of Pixels 1280 x 3(RGB) x 800 dots
Module dimension 257.96 × 168.6 × 22.33 mm
Active area 216.96 (H) × 135.6(V) mm
Pixel pitch 0.1695 × 0.1695 mm
Display Mode Normally Black , Transmissive
Viewing Angle 80/80/80/80
Pixel Arrangement R.G.B. Vertical Stripe
TFT Drive IC EK79202B1 or Equivalent
Backlight Type LED,Normally White
Aspect Ratio 16:10
TFT Interface LVDS
PCAP FW Version 80
PCAP IC GT928 or Equivalent
PCAP Interface I2C
PCAP Resolution 1280*800
Touch Panel Projected Capacitive Touch Panel (PCAP)
Surface Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 － +70 ℃
Storage Temperature TST -30 － +80 ℃

Electrical Characteristics

Typical Operation Conditions：

Item Symbol Values Unit
Min. Typ. Max.
Power Voltage DC12V - 12.0 - V
IDC12V   260 390 mA
Supply PCAP VDDT 2.8 - 3.3 V
IVDDT - 14 21 mA
 

Backlight Characteristics：

Parameter Symbol Min Typ Max Unit
PWM Control Level (LED_PWM) High Level - 3.3 - V
Low Level - 0 - V
PWM Control Duty Ratio - 1 - 100 %
PWM Control Frequency - - 10K - Hz
LED Life Time - 50,000 - - Hr
go top
close