10.1 inch High Brightness IPS TFT 1280x800 with PCAP
Model No. WF101LSYJPLNG0
►Size : 10.1 inch
►Resolution : 1280×800 dots
►View Direction : IPS
►Interface : LVDS
►Driver IC:EK79202B1
►Control-Board : No
►Brightness (cd/m²): 900
►Frame Through Hole: No
►Touch Screen : Projected Capacitive Touch Panel (PCAP)
►Detect Point : 5 Fingers
Description
WF101LSYJPLNG0 is a 10’1” IPS TFT LCD Display with 1280x800 (WXGA) pixels. This TFT module adopted IPS technology which has the advantage of a wider viewing angle of Left:80 / Right:80 / Up:80 / Down:80 degrees. This module built-in with EK79202B1 driver IC, supports LVDS interface, with high brightness of 900 nits (typical value), aspect ratio of 16:10, contrast ratio of 1000:1 (typical value).
This model featured a projected capacitive touch panel (PCAP), glare surface for cover lens , which is built-in with GT928 IC and supports I2C interface. The power supply voltage for LCM is 12V (typical value). It can operate at temperatures from -20℃ to +70℃ and storage temperatures from -30℃ to +70℃.
DRAWING
SPECIFICATIONS
Interface
LCM PIN Definition
Pin No. | Symbol | I/O | Function |
---|---|---|---|
1 | DC12V | P | Power Supply |
2 | DC12V | P | Power Supply |
3 | DC12V | P | Power Supply |
4 | NC | - | No connection |
5 | GND | P | Ground |
6 | GND | P | Ground |
7 | GND | P | Ground |
8 | Rxin0- | I | -LVDS Differential Data Input |
9 | Rxin0+ | I | +LVDS Differential Data Input |
10 | GND | P | Ground |
11 | Rxin1- | I | -LVDS Differential Data Input |
12 | Rxin1+ | I | +LVDS Differential Data Input |
13 | GND | P | Ground |
14 | Rxin2- | I | -LVDS Differential Data Input |
15 | Rxin2+ | I | +LVDS Differential Data Input |
16 | GND | P | Ground |
17 | RxCLK- | I | -LVDS Differential Clock Input |
18 | RxCLK+ | I | +LVDS Differential Clock Input |
19 | GND | P | Ground |
20 | Rxin3- | I | -LVDS Differential Data Input |
21 | Rxin3+ | I | +LVDS Differential Data Input |
22 | GND | P | Ground |
23 | PWM | This pin is connected to the external LED driver. PWM type control signal for brightness of the LED backlight. If not used, please float this pin. | |
24 | NC | - | No connection |
25 | DC3V | P | Power Supply |
26 | NC | - | No connection |
27 | GND | P | Ground |
28 | SDA | I/O | Serial communication data input. |
29 | SCL | I | Serial communication clock input |
30 | INT | O | External interrupt to the host |
31 | RST | I | External Reset, Low is active |
32 | GND | P | Ground |
33~43 | NC | - | No connection |
44 | GND | P | Ground |
45 | GND | P | Ground |
46 | GND | P | Ground |
47 | NC | - | No connection |
48 | DC12V | P | Power Supply |
49 | DC12V | P | Power Supply |
50 | DC12V | P | Power Supply |
General Specifications
Item | Dimension | Unit |
---|---|---|
Screen Diagonal | 10.1 | inch |
Number of Pixels | 1280 x 3(RGB) x 800 | dots |
Module dimension | 257.96 × 168.6 × 25.88 | mm |
Active area | 216.96 (H) × 135.6(V) | mm |
Pixel pitch | 0.1695 × 0.1695 | mm |
Display Mode | Normally Black , Transmissive | |
Viewing Angle | 80/80/80/80 | |
Pixel Arrangement | R.G.B. Vertical Stripe | |
TFT Drive IC | EK79202B1 or Equivalent | |
Backlight Type | LED,Normally White | |
Aspect Ratio | 16:10 | |
TFT Interface | LVDS | |
PCAP FW Version | 80 | |
PCAP IC | GT928 or Equivalent | |
PCAP Interface | I2C | |
PCAP Resolution | 1280*800 | |
Touch Panel | Projected Capacitive Touch Panel (PCAP) | |
Surface | Glare |
Absolute Maximum Ratings
Item | Symbol | Min | Typ | Max | Unit |
---|---|---|---|---|---|
Operating Temperature | TOP | -20 | - | +70 | ℃ |
Storage Temperature | TST | -30 | - | +80 | ℃ |
Electrical Characteristics
Typical Operation Conditions:
Item | Symbol | Min | Typ | Max | Unit |
---|---|---|---|---|---|
Supply Voltage For LCM +12V | DC12V | - | 12.0 | - | V |
Supply Current For LCM +12V | IDC12V | - | 620 | 950 | mA |
Supply Voltage For PCAP (I2C) | DC3V | 3.15 | 3.3 | 3.45 | V |
Supply Current For PCAP (I2C) | IDC3V | - | 14 | 21 | mA |
Backlight Characteristics:
Parameter | Symbol | Min | Typ | Max | Unit |
---|---|---|---|---|---|
PWM Control Level (LED_PWM) | High Level | - | 3.3 | - | V |
Low Level | - | 0 | - | V | |
PWM Control Duty Ratio | - | 1 | - | 100 | % |
PWM Control Frequency | - | - | 10K | - | Hz |
LED Life Time | - | 50,000 | - | - | Hr |