10.1 polegadas, IPS,Display (PCAP) TFT alto Brilho
Model No. WF101LSYJPLNG0
►Tamanho: 10.1 polegadas
►Resolução : 1280×800 pontos
►Direção de exibição IPS
►Interface : LVDS
►Driver IC:EK79202B1
►Placa de controle : Não
►Brilho(cd/m²): 900
►Quadro com furo passante : Não
►Tela de Toque: Com painel de toque capacitivo (PCAP)
►Detect Point : 5 Fingers
DRAWING
SPECIFICATIONS
Função do pino de interface
LCM PIN Definition
Pin No. | Símbolo | I/O | Função |
---|---|---|---|
1 | DC12V | P | Power Supply |
2 | DC12V | P | Power Supply |
3 | DC12V | P | Power Supply |
4 | NC | - | No connection |
5 | GND | P | Ground |
6 | GND | P | Ground |
7 | GND | P | Ground |
8 | Rxin0- | I | -LVDS Differential Data Input |
9 | Rxin0+ | I | +LVDS Differential Data Input |
10 | GND | P | Ground |
11 | Rxin1- | I | -LVDS Differential Data Input |
12 | Rxin1+ | I | +LVDS Differential Data Input |
13 | GND | P | Ground |
14 | Rxin2- | I | -LVDS Differential Data Input |
15 | Rxin2+ | I | +LVDS Differential Data Input |
16 | GND | P | Ground |
17 | RxCLK- | I | -LVDS Differential Clock Input |
18 | RxCLK+ | I | +LVDS Differential Clock Input |
19 | GND | P | Ground |
20 | Rxin3- | I | -LVDS Differential Data Input |
21 | Rxin3+ | I | +LVDS Differential Data Input |
22 | GND | P | Ground |
23 | PWM | This pin is connected to the external LED driver. PWM type control signal for brightness of the LED backlight. If not used, please float this pin. | |
24 | NC | - | No connection |
25 | DC3V | P | Power Supply |
26 | NC | - | No connection |
27 | GND | P | Ground |
28 | SDA | I/O | Serial communication data input. |
29 | SCL | I | Serial communication clock input |
30 | INT | O | External interrupt to the host |
31 | RST | I | External Reset, Low is active |
32 | GND | P | Ground |
33~43 | NC | - | No connection |
44 | GND | P | Ground |
45 | GND | P | Ground |
46 | GND | P | Ground |
47 | NC | - | No connection |
48 | DC12V | P | Power Supply |
49 | DC12V | P | Power Supply |
50 | DC12V | P | Power Supply |
General Specifications
Item | Dimensão | Unidade |
---|---|---|
Tamanho | 10.1 | polegadas |
Resolução | 1280 x 3(RGB) x 800 | pontos |
Dimensão do módulo | 257.96 × 168.6 × 25.88 | mm |
Área ativa | 216.96 (H) × 135.6(V) | mm |
Distância entre pontos | 0.1695 × 0.1695 | mm |
Modo de exibição | Preto , Transmissivo | |
Viewing Angle | 80/80/80/80 | |
Arranjo de pixels | R.G.B. Vertical Stripe | |
TFT Drive IC | EK79202B1 ou equivalente | |
Tipo de luz de fundo | LED, Branco | |
Relação de aspecto | 16:10 | |
TFT Interface | LVDS | |
PCAP FW Version | 80 | |
PCAP IC | GT928 ou equivalente | |
PCAP Interface | I2C | |
PCAP Resolução | 1280*800 | |
Painel de toque | painel de toque capacitivo | |
Superfície | Reflexo |
Classificações Máximas Absolutas
Item | Símbolo | Valor Min | Valor Típico | Valor Máximo | Unidade |
---|---|---|---|---|---|
Temperatura de operação | TOP | -20 | - | +70 | ℃ |
Temperatura de armazenamento | TST | -30 | - | +80 | ℃ |
Características Eletrônicas
Condições Típicas de Operação:
Item | Símbolo | Valor Min | Valor Típico | Valor Máximo | Unidade |
---|---|---|---|---|---|
Tensão de alimentação para LCM +12V | DC12V | - | 12.0 | - | V |
Corrente de alimentação para LCM +12V | IDC12V | - | 620 | 950 | mA |
Tensão de alimentação para PCAP (I2C) | DC3V | 3.15 | 3.3 | 3.45 | V |
Corrente de alimentação para PCAP (I2C) | IDC3V | - | 14 | 21 | mA |
Características da luz de fundo:
Parameter | Símbolo | Valor Min | Valor Típico | Valor Máximo | Unidade |
---|---|---|---|---|---|
Nível de controle PWM (LED_PWM) | High Level | - | 3.3 | - | V |
Low Level | - | 0 | - | V | |
Taxa de serviço de controle PWM | - | 1 | - | 100 | % |
Frequência de controle PWM | - | - | 10K | - | Hz |
Vida útil do LED | - | 50,000 | - | - | Hr |