1024x600 Pantalla TFT PCAP Touch Screen 10.1"
Modelo Nº WF101JSYJHLNB0
►Tamaño : 10,1 pulgada
►Resolución : 1024×600 pontos
►Dirección de la vista : IPS
►Interfaz : LVDS
►Controlador IC : EK79001HN + EK73215BCGA
►Placa de control : No
►Brillo (cd/m2) : 900
►Placa de control : Yes
►Pantalla táctil : panel táctil capacitivo (PCAP)
►Detect Point : 5 Fingers
DIBUJO
ESPECIFICACIONES
Función interfaz Pin
TFT LCD Module
Pin No. | Símbolo | Función |
---|---|---|
1-3 | DC12V | Digital power |
4 | NC | No connection |
5-8 | GND | Digital ground |
8 | Rxin0- | Negative LVDS differential data inputs |
9 | Rxin0+ | Positive LVDS differential data inputs |
10 | GND | Digital ground |
11 | Rxin1- | Negative LVDS differential data inputs |
12 | Rxin1+ | Positive LVDS differential data inputs |
13 | GND | Digital ground |
14 | Rxin2- | Negative LVDS differential data inputs |
15 | Rxin2+ | Positive LVDS differential data inputs |
16 | GND | Digital ground |
17 | RxCLK- | Negative LVDS differential clock inputs |
18 | RxCLK+ | Positive LVDS differential clock inputs |
19 | GND | Digital ground |
20 | Rxin3- | Negative LVDS differential data inputs |
21 | Rxin3+ | Positive LVDS differential data inputs |
22 | GND | Digital ground |
23 | LED_PWM | Backlight control signal |
24 | USB_DC5V | Power supply for PCAP (USB type) |
25 | DC3V | Power supply for PCAP (I2C Type) |
26 | USB_D+ | Data + (PCAP) |
27 | GND | Digital ground |
28 | SDA | I2C data input and output (PCAP) |
29 | SCL | I2C clock input (PCAP) |
30 | INT | External interrupt to the host (PCAP) |
31 | RST | External Reset, Low is active (PCAP) |
32 | GND | Digital ground |
33 | USB_D- | Data - (PCAP) |
34-43 | NC | No connection |
44-46 | GND | Digital ground |
47 | NC | No connection |
48-50 | DC12V | Digital power |
Especificaciones generales
Elemento | Dimensión | Unidad |
---|---|---|
Tamaño | 10.1 | pulgada |
Matriz de puntos | 1024 RGB x 600 | dots |
Dimensión del módulo | 235(W) x 143(H) x 22.43(D) | mm |
zona activa | 222.72 (H) x 125.28(V) | mm |
Distancia entre puntos | 0.2175(W) x 0.2088(H) | mm |
Tipo de LCD | TFT, Negro, Transmisivo | |
Interfaz | LVDS | |
Controlador IC | EK79001HN + EK73215BCGA o equivalente | |
Dirección de la vista | 85/85/85/85 | |
Relación de aspecto | 16:9 | |
Tipo de retroiluminación | LED, Blanco | |
PCAP IC | ILI2511 or equivalent | |
PCAP Interface | USB (I2C available) | |
PCAP FW Version | V6.0.0.0.62.90.1.2 | |
Con o sin panel táctil | Con panel táctil capacitivo (PCAP) | |
Superficie | Glare |
Valores nominales máximos absolutos
Elemento | Símbolo | Valor mín. | Valor típico | Valor máx. | Unidad |
---|---|---|---|---|---|
Temperatura de funcionamiento | TOP | -20 | - | +70 | ℃ |
Temperatura de almacenamiento | TST | -30 | - | +80 | ℃ |
Características electrónicas
1.Typical Operation Conditions (At Ta = 25 °C)
Elemento | Símbolo | Valor mín. | Valor típico | Valor máx. | Unidad |
---|---|---|---|---|---|
Supply Voltage For LCM +12V | DC12V | - | 12.0 | - | V |
Supply Current For LCM +12V | IDC12V | - | 650 | 980 | mA |
Supply Voltage For PCAP(I2C) | DC3V | 3.15 | 3.3 | 3.45 | V |
Supply Current For PCAP (I2C) | IDC3V | - | 80 | 120 | mA |
Supply PCAP | USB_DC 5V | 4.75 | 5.0 | 5.25 | V |
IUSB_DC 5V | - | 100 | 100 | mA |
2. Backlight Driving Conditions
Parameter | Símbolo | Valor mín. | Valor típico | Valor máx. | Unidad |
---|---|---|---|---|---|
PWM Control Level (LED_PWM) | High Level | - | 3.3 | - | V |
Low Level | - | 0 | - | V | |
PWM Control Duty Ratio | - | 1 | - | 100 | % |
PWM Control Frequency | - | - | 10K | - | Hz |
LED Life Time | - | 50,000 | - | - | Hr |