10.1 pollici 1024x600 Display LCD TFT (PCAP)
Modello numero WF101JSYJHLNB0
►Risoluzione : 1024×600 punti
►Dimensione : 10.1 pollici
►Direzione di visione : IPS
►Interfaccia : LVDS
►Driver IC : EK79001HN + EK73215BCGA
►Scheda di controllo : Yes
►Luminosità (cd/m2) : 900
►Cornice di fissaggio : No
►Touch Screen : con pannello touch capacitivo (PCAP)
►Detect Point : 5 Fingers
DISEGNO
SPECIFICHE TECNICHE
Funzione dei Pin di Interfaccia
TFT LCD Module
| Pin No. | Simbolo | Funzione |
|---|---|---|
| 1-3 | DC12V | Digital power |
| 4 | NC | No connection |
| 5-8 | GND | Digital ground |
| 8 | Rxin0- | Negative LVDS differential data inputs |
| 9 | Rxin0+ | Positive LVDS differential data inputs |
| 10 | GND | Digital ground |
| 11 | Rxin1- | Negative LVDS differential data inputs |
| 12 | Rxin1+ | Positive LVDS differential data inputs |
| 13 | GND | Digital ground |
| 14 | Rxin2- | Negative LVDS differential data inputs |
| 15 | Rxin2+ | Positive LVDS differential data inputs |
| 16 | GND | Digital ground |
| 17 | RxCLK- | Negative LVDS differential clock inputs |
| 18 | RxCLK+ | Positive LVDS differential clock inputs |
| 19 | GND | Digital ground |
| 20 | Rxin3- | Negative LVDS differential data inputs |
| 21 | Rxin3+ | Positive LVDS differential data inputs |
| 22 | GND | Digital ground |
| 23 | LED_PWM | Backlight control signal |
| 24 | USB_DC5V | Power supply for PCAP (USB type) |
| 25 | DC3V | Power supply for PCAP (I2C Type) |
| 26 | USB_D+ | Data + (PCAP) |
| 27 | GND | Digital ground |
| 28 | SDA | I2C data input and output (PCAP) |
| 29 | SCL | I2C clock input (PCAP) |
| 30 | INT | External interrupt to the host (PCAP) |
| 31 | RST | External Reset, Low is active (PCAP) |
| 32 | GND | Digital ground |
| 33 | USB_D- | Data - (PCAP) |
| 34-43 | NC | No connection |
| 44-46 | GND | Digital ground |
| 47 | NC | No connection |
| 48-50 | DC12V | Digital power |
General Specifications
| Articolo | Dimensioni | Unità |
|---|---|---|
| Dimensione | 10.1 | pollici |
| A matrice di punti | 1024 RGB x 600 | dots |
| Dimensione del modulo | 235(W) x 143(H) x 22.43(D) | mm |
| Area attiva | 222.72 (H) x 125.28(V) | mm |
| Passo del Dot | 0.2175(W) x 0.2088(H) | mm |
| Tipo LCD | TFT, Nero, Trasmissivo | |
| Interfaccia | LVDS | |
| Driver IC | EK79001HN + EK73215BCGA equivalente | |
| Direzione di visione | 85/85/85/85 | |
| Proporzioni dell’area visiva (ratio) | 16:9 | |
| Tipo di backlight | LED, Bianco | |
| PCAP IC | ILI2511 o equivalente | |
| PCAP Interfaccia | USB (I2C available) | |
| PCAP FW versione | V6.0.0.0.62.90.1.2 | |
| Con / senza Touch Panel | con pannello touch capacitivo (PCAP) | |
| Superficie | Bagliore (Glare) | |
Valori massimi assoluti
| Articolo | Simbolo | Valore Min | Valore tipico | Valore massimo | Unità |
|---|---|---|---|---|---|
| Temperatura di lavoro | TOP | -20 | － | +70 | ℃ |
| Temperatura di stock | TST | -30 | － | +80 | ℃ |
Caratteristiche elettriche
1.Typical Operation Conditions (At Ta = 25 °C)
| Articolo | Simbolo | Valore Min | Valore tipico | Valore massimo | Unità |
|---|---|---|---|---|---|
| Supply Voltage For LCM +12V | DC12V | - | 12.0 | - | V |
| Supply Current For LCM +12V | IDC12V | - | 650 | 980 | mA |
| Supply Voltage For PCAP(I2C) | DC3V | 3.15 | 3.3 | 3.45 | V |
| Supply Current For PCAP (I2C) | IDC3V | - | 80 | 120 | mA |
| Supply PCAP | USB_DC 5V | 4.75 | 5.0 | 5.25 | V |
| IUSB_DC 5V | - | 100 | 100 | mA |
2. Backlight Driving Conditions
| Parametro | Symbol | Valore Min | Valore tipico | Valore massimo | Unità |
|---|---|---|---|---|---|
| PWM Control Level (LED_PWM) | High Level | - | 3.3 | - | V |
| Low Level | - | 0 | - | V | |
| PWM Control Duty Ratio | - | 1 | - | 100 | % |
| PWM Control Frequency | - | - | 10K | - | Hz |
| LED Life Time | - | 50,000 | - | - | Hr |
