首頁 產品介紹 繪圖LCD液晶模組 WG20232A

202x32 LCD,單色繪圖型液晶顯示器模組

型號 WG20232A

►202x32 繪圖型液晶模組
►內建震盪器
►IC: SBN1661G
►1/32 duty cycle
►2.85~5V電源電壓
►介面: 6800/8080

產品敘述

WG20232A是一款202x32單色繪圖型液晶顯示器模組。此款模組內置SBN1661G控制器,5V驅動,支援6800 / 8080 8-bit平行介面。WG20232A模組的外觀尺寸是146x23 mm, AA區尺寸是119.16x18.86 mm。此款模組的操作溫度是-20℃ 至 +70℃,儲存溫度為-30℃ 至 +80℃,所有物料符合環保RoHS標準與歐盟REACH規範。
 

規格圖

Winstar LCD 202x32, Monochrome Graphic Display - WG20232A
Data source ref:WG20232A-TFH-V#A

產品規格

Pin功能定義

Pin No. 符號 Level 說明
1 VSS 0V Ground
2 VDD 5.0V Power Supply
3 VO (Variable) Operating voltage for LCD
4 A0 H/L H : Data L : Instruction
5 R/W H/L Read/Write (R/W) signal for the 68-type microcontroller
68-type microcotroller is selected as the host microcontroller, this pin should be connected to the R/W output of the microcontroller. A HIGH level on this pin indicates that the microcontroller intends to read from the SBN1661G_X series. A LOW level on this pin indicates that the microcontroller intends to write to the SBN1661G_X series.
6 CS1 H/L Enable signal (E) for the 68-type microcontroller.
68-type microcotroller is selected as the host microcontroller, this pin should be connected to the ENABLE output of the microcontroller. A HIGH level on this pin indicates that the microcontroller intends to select the SBN1661G_X series.
7 DB0 H/L Bi-direction, tri-state 8-bit parallel data bus for interface with a host microcontroller.
This data bus is for data transfer between the host microcontroller and the SBN1661G_X.
8 DB1 H/L Bi-direction, tri-state 8-bit parallel data bus for interface with a host microcontroller.
9 DB2 H/L This data bus is for data transfer between the host microcontroller and the SBN1661G_X.
10 DB3 H/L Bi-direction, tri-state 8-bit parallel data bus for interface with a host microcontroller.
11 DB4 H/L This data bus is for data transfer between the host microcontroller and the SBN1661G_X.
12 DB5 H/L Bi-direction, tri-state 8-bit parallel data bus for interface with a host microcontroller.
13 DB6 H/L This data bus is for data transfer between the host microcontroller and the SBN1661G_X.
14 DB7 H/L Bi-direction, tri-state 8-bit parallel data bus for interface with a host microcontroller.
15 VEE - Negative Voltage Output
16 RES H/L Hardware RESET and interface type selection.
This pin is a dual function pin. It can be used to reset the SBN1661G_X and select the type of interface timing.
17 A Power Supply for LED backlight  ( + )
18 K Power Supply for LED backlight  ( - )
19 CS2 H/L Enable signal (E) for the 68-type microcontroller.
68-type microcotroller is selected as the host microcontroller, this pin should be connected to the ENABLE output of the microcontroller. A HIGH level on this pin indicates that the microcontroller intends to select the SBN1661G_X series.
20 CS3 H/L Enable signal (E) for the 68-type microcontroller.
If a 68-type microcotroller is selected as the host microcontroller, this pin should be connected to the ENABLE output of the microcontroller. A HIGH level on this pin indicates that the microcontroller intends to select the SBN1661G_X series.

規格說明

項目 標準尺寸 單位
點陣(解析度) 202 x 32
模組尺寸 146.0 x 43.0 x 13.7(Max) mm
檢視區域 123.0 x 23.0 mm
有效區域 119.16 x 18.86 mm
點大小 0.57 x 0.57 mm
點間距 0.59 x 0.59 mm
驅動方式 1/32
背光類型 LED
IC SBN1661G-M18
介面 6800

最大絕對額定值

項目 符號 最小值 典型值 最大值 單位
工作溫度 TOP -20 +70
儲存溫度 TST -30 +80
輸入電壓 VI -0.3 VDD+0.3 V
邏輯電源電壓 VDD-VSS -0.3 +6.0 V
LCD bias voltage VLCD 3.5 13 V

電氣特性

項目 符號 條件 最小值 典型值 最大值 單位
邏輯電源電壓 VDD-VSS 4.5 5.0 5.5 V
LCD電源電壓 VDD-V0 Ta=-20℃
Ta=25℃
Ta=70℃

4.8

5.0

5.2
V
V
V
輸入高電壓 VIH VDD=5.0V 3.0 5.0 VDD+0.5 V
輸入低電壓 VIL 0 0.7 1.1 V
輸出高電壓 VOH VDD-0.3 VDD V
輸出低電壓 VOL 0 0.3 V
電源電流 IDD VDD=5.0V 10.0 mA


Search keyword: 202x32 lcd, 202 x 32 lcd, lcd 202x32, lcd 202 x 32

推薦產品

go top
close