202x32 Ggrafik LCD Ekran

Model No. WG20232A

►Grafik LCD 202x32
►Türü : Grafik
►Yapı : COB
►Boyut : 4,75 inç
►Osilasyon dahil
►IC: SBN1661G
►1/32 görev döngüsü
►2.85~5V güç sağlayıcı
►Ara yüz : 6800/8080

PDF İndir

DEMO CODE Sorguya ekle

Önceki Listeye geri dön Sonraki

ÇIZIM

Winstar LCD 202x32, Monochrome Graphic Display - WG20232A

Data source ref:WG20232A-TFH-V#A

AYRINTILAR

Arayüz Pin Fonksiyonlari

Pin No.	Symbol	Level	TANIM
1	VSS	0V	Ground
2	VDD	5.0V	Power Supply
3	VO	(Variable)	Operating voltage for LCD
4	A0	H/L	H : Data L : Instruction
5	R/W	H/L	Read/Write (R/W) signal for the 68-type microcontroller 68-type microcotroller is selected as the host microcontroller, this pin should be connected to the R/W output of the microcontroller. A HIGH level on this pin indicates that the microcontroller intends to read from the SBN1661G_X series. A LOW level on this pin indicates that the microcontroller intends to write to the SBN1661G_X series.
6	CS1	H/L	Enable signal (E) for the 68-type microcontroller. 68-type microcotroller is selected as the host microcontroller, this pin should be connected to the ENABLE output of the microcontroller. A HIGH level on this pin indicates that the microcontroller intends to select the SBN1661G_X series.
7	DB0	H/L	Bi-direction, tri-state 8-bit parallel data bus for interface with a host microcontroller. This data bus is for data transfer between the host microcontroller and the SBN1661G_X.
8	DB1	H/L	Bi-direction, tri-state 8-bit parallel data bus for interface with a host microcontroller.
9	DB2	H/L	This data bus is for data transfer between the host microcontroller and the SBN1661G_X.
10	DB3	H/L	Bi-direction, tri-state 8-bit parallel data bus for interface with a host microcontroller.
11	DB4	H/L	This data bus is for data transfer between the host microcontroller and the SBN1661G_X.
12	DB5	H/L	Bi-direction, tri-state 8-bit parallel data bus for interface with a host microcontroller.
13	DB6	H/L	This data bus is for data transfer between the host microcontroller and the SBN1661G_X.
14	DB7	H/L	Bi-direction, tri-state 8-bit parallel data bus for interface with a host microcontroller.
15	VEE	-	Negative Voltage Output
16	RES	H/L	Hardware RESET and interface type selection. This pin is a dual function pin. It can be used to reset the SBN1661G_X and select the type of interface timing.
17	A	－	Power Supply for LED backlight ( + )
18	K	－	Power Supply for LED backlight ( - )
19	CS2	H/L	Enable signal (E) for the 68-type microcontroller. 68-type microcotroller is selected as the host microcontroller, this pin should be connected to the ENABLE output of the microcontroller. A HIGH level on this pin indicates that the microcontroller intends to select the SBN1661G_X series.
20	CS3	H/L	Enable signal (E) for the 68-type microcontroller. If a 68-type microcotroller is selected as the host microcontroller, this pin should be connected to the ENABLE output of the microcontroller. A HIGH level on this pin indicates that the microcontroller intends to select the SBN1661G_X series.

Mekanik Veri

Kalem	Ölçü	Birim
Number of dots	202 x 32	－
Modül ölçüleri	146.0 x 43.0 x 13.7(Max)	mm
Görüntüleme alanı	123.0 x 23.0	mm
Aktif alan	119.16 x 18.86	mm
Nokta boyutu	0.57 x 0.57	mm
Nokta sıklığı	0.59 x 0.59	mm
Duty	1/32
Backlight Tipi	LED
IC	SBN1661G-M18
Arayüz	6800

Maksimum Değerler

Kalem	Sembol	Minumum Deger	Tipik Deger	Maksimum Deger	Birim
Çalışma Sıcaklığı	TOP	-20	－	+70	℃
Saklama Sıcaklığı	TST	-30	－	+80	℃
Input Voltage	VI	-0.3	－	VDD+0.3	V
Supply Voltage For Logic	VDD-VSS	-0.3	－	+6.0	V
LCD bias voltage	VLCD	3.5	－	13	V

Elektronik Özellikleri

Kalem	Sembol	Condition	Minumum Deger	Tipik Deger	Maksimum Deger	Birim
Supply Voltage For Logic	VDD-VSS	－	4.5	5.0	5.5	V
Supply Voltage For LCD	VDD-V0	Ta=-20℃ Ta=25℃ Ta=70℃	－ 4.8 －	－ 5.0 －	－ 5.2 －	V V V
Input High Volt.	VIH	VDD=5.0V	3.0	5.0	VDD+0.5	V
Input Low Volt.	VIL	－	0	0.7	1.1	V
Output High Volt.	VOH	－	VDD-0.3	－	VDD	V
Output Low Volt.	VOL	－	0	－	0.3	V
Supply Current	IDD	VDD=5.0V	－	10.0	－	mA