我們重視您的隱私
通過點擊「允許所有 Cookie」,代表您同意在您的設備上存儲 Cookie 以增強網站瀏覽體驗、分析網站使用情況並協助我們的行銷和網站效能優化工作。您可以在我們的隱私權政策中找到有關於此的更多資訊。
Pin No. | 符號 | Level | 說明 | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | RS | H/L | Select registers. 0: Instruction register (for write) Busy flag & address counter (for read) 1: Data register (for write and read) |
|||||||||||||||
2 | R/W | H/L | Select read or write (In parallel mode). 0: Write 1: Read |
|||||||||||||||
3 | E | H,H→L | Starts data read/write. (“E” must connect to “VDD” when serial interface is selected.) | |||||||||||||||
4 | DB0 | H/L | Data bus line | |||||||||||||||
5 | DB1 | H/L | Data bus line | |||||||||||||||
6 | DB2 | H/L | Data bus line | |||||||||||||||
7 | DB3 | H/L | Data bus line | |||||||||||||||
8 | DB4 | H/L | Data bus line | |||||||||||||||
9 | DB5 | H/L | Data bus line | |||||||||||||||
10 | DB6/SCL | H/L | Data bus line (In I2C interface DB6 (SCL) is clock input. SDA and SCL must connect to I2C bus (I2C bus is to connect a resister between SDA/SCL and the power of I2C bus ). |
|||||||||||||||
11 | DB7/SDA | H/L | Data bus line (In I2C interface DB7 (SDA) is input data. SDA and SCL must connect to I2C bus (I2C bus is to connect a resister between SDA/SCL and the power of I2C bus ). |
|||||||||||||||
12 | VSS | 0V | Ground | |||||||||||||||
13 | VDD | 3.3/5.0V (bon=1 Max=3.5V |
Supply Voltage for logic | |||||||||||||||
14 | Vout | (Variable) | Operating voltage for LCD | |||||||||||||||
15 | PSB | Interface selection 0:serial mode (“E” must connect to “VDD” when serial mode is selected.) 1:parallel mode(4/8 bit) In I2C interface PSB must connect to VDD |
||||||||||||||||
16 | PSI2B |
|
||||||||||||||||
17 | CAP1P | For voltage booster circuit(VDD-VSS) External capacitor about 0.1u~4.7uf |
||||||||||||||||
18 | CAP1N | |||||||||||||||||
19 | NC | No connection | ||||||||||||||||
20 | NC | No connection |
項目 | 標準尺寸 | 單位 |
---|---|---|
字元數 | 16 字元 × 2 行 | - |
模組尺寸 | 72.1 × 29.6 × 9.4 | mm |
檢視區域 | 61.0 × 15.1 | mm |
有效區域 | 56.2 × 11.5 | mm |
點大小 | 0.55 × 0.65 | mm |
點間距 | 0.60 × 0.70 | mm |
字元大小 | 2.95 × 5.55 | mm |
字元間距 | 3.55 × 5.95 | mm |
驅動方式 | 1/16 , 1/5 Bias | |
背光類型 | LED | |
IC | ST7032i | |
介面 | 68/ 4-Line SPI /IIC |
項目 | 符號 | 最小值 | 標準值 | 最大值 | 單位 |
---|---|---|---|---|---|
工作溫度 | TOP | -20 | - | +70 | ℃ |
儲存溫度 | TST | -30 | - | +80 | ℃ |
輸入電壓 | VIN | -0.3 | - | VDD+0.3 | V |
電源電壓 | VDD-VSS | -0.3 | - | +6.0 | V |
LCD驅動電壓 | VLCD | 2.7 | - | 7.0 | V |
項目 | 符號 | 條件 | 最小值 | 標準值 | 最大值 | 單位 |
---|---|---|---|---|---|---|
邏輯電源電壓 | VDD-VSS | - | 3 | 3.3 | 5 (bon=1 max=3.5V) |
V |
LCM電源電壓 | Vout-VSS | Ta=-20℃ Ta=25℃ Ta=70℃ |
4.3 - |
- 4.5 - |
- 4.7 - |
V V V |
輸入高電壓 | VIH | - | 0.7 VDD | - | VDD | V |
輸入低電壓 | VIL | - | - | - | 0.2 VDD | V |
輸出高電壓 | VOH | - | 0.8 VDD | - | VDD | V |
輸出低電壓 | VOL | - | - | - | 0.2VDD | V |
供電電流(不含LED背光) | IDD | - | - | - | 2.0 | mA |
通過點擊「允許所有 Cookie」,代表您同意在您的設備上存儲 Cookie 以增強網站瀏覽體驗、分析網站使用情況並協助我們的行銷和網站效能優化工作。您可以在我們的隱私權政策中找到有關於此的更多資訊。