首页 产品介绍 LCD显示屏 COG液晶模块 WO12864N

128x64 ST7567 COG LCM液晶显示模块

型号 WO12864N

►COG显示屏
►类型: 图形
►结构: COG
►尺寸: 2.82英寸
►128x64 点阵
►IC: ST7567
►3V电源电压
►1/65 duty cycle
►接口:6800/8080/SPI

产品叙述

因应部分IC交期长, 华凌开发WO12864N作为WO12864B1替代选项型号。

规格图

128x64 ST7567 Chip on Glass LCD Module - WO12864N

产品规格

Pin功能定义

Pin 符号 说明
1 CSB Chip select input pin.Interface access is enabled when CSB is “L”,When CSB is non-active(CSB=”H”),D[7:0] pins are high impedance.
2 RSTB Hardware reset input pin. When RSTB is “L”, interna initialization is executed and the internal registers will be initialized.
3 A0 It determines whether the access is related to data or command. A0=“H” : Indicates that signals on D[7:0] are display data.
A0=“L” : Indicates that signals on D[7:0] are command
4 RWR Read/Write execution control pin. When PSB is “H”,
RWR is not used in serial interface and should fix to “H” by VDD1 or VDDH.
5 ERD Read/Write execution control pin. When PSB is “H”,
ERD is not used in serial interface and should fix to “H” by VDD1 or VDDH.
6 D0 When using 8-bit parallel interface: (6800 or 8080 mode)
8-bit bi-directional data bus. Connect to the data bus of 8-bit microprocessor. When CSB is non-active (CSB=“H”), D[7:0] pins are high impedance.
7 D1
8 D2
9 D3
10 D4
11 D5
12 D6
13 D7
14 VDD Power supply
15 Vss Ground
16-19 NC Not connect.
20 V0 V0 is the LCD driving voltage for common circuits at negative frame.
21 XV0 XV0 is the LCD driving voltage for common circuits at positive frame.
22 VG VG is the LCD driving voltage for segment circuits.
23-27 NC Not connect.
28 C86 C86 selects the microprocessor type in parallel interface mode.
29 PSB PSB selects the interface type: Serial or Parallel.
30 NC Not connect.

规格说明

项目 规格 单位
点阵(分辨率) 128 x 64
模块尺寸 89.7 x 49.8 x 6.0 mm
检视区域 69.0 x 36.5 mm
有效区域 63.97 x 31.97 mm
点大小 0.47 x 0.47 mm
点间距 0.5 x 0.5 mm
驱动方式 1/65 , 1/9 Bias
背光类型 LED
IC ST7567
接口 6800/8080/4线 SPI

最大绝对额定值

项目 符号 最小值 典型值 最大值 单位
工作温度 TOP -20 +70
储存温度 TST -30 +80
输入电压 VI -0.3 VDD+0.3 V
数字电源电压 VDD-Vss -0.3 3.6 V
LCD供电电压 V0-XV0 -0.3 16 V

电气特性

项目 符号 条件 最小值 典型值 最大值 单位
逻辑电源电压 VDD-VSS 2.8 3.0 3.2 V
LCD供电电压 VOP Ta=-20℃
Ta=25℃
Ta=70℃

9.3

9.5

9.7
V
V
V
输入高电压 VIH 0.7 VDD VDD V
输入低电压 VIL Vss 0.3VDD V
输出高电压 VOH 0.8 VDD VDD V
输出低电压 VOL Vss 0.2VDD V
供电电流 IDD VDD=3.0V 0.7 1.0 mA
 

Search Keyword: lcd 128x64, lcd 128 x 64, 128x64 lcd, 128 x 64 lcd

go top
close

我们重视您的隐私

通过点击「允许所有 Cookie」,代表您同意在您的设备上存储 Cookie 以增强网站浏览体验、分析网站使用情况并协助我们的营销和网站效能优化工作。您可以在我们的隐私权政策中找到有关于此的更多信息。

我们重视您的隐私

Winstar 及部分第三方在 www.winstar.com.tw 上使用 cookies。关于 cookie 的种类、用途及相关第三方的详细信息,请参见下文及我们的《Cookie 政策》。请点击“允许全部”来同意我们使用 cookies,以确保您在我们网站上获得最佳体验。您也可以设置您的偏好或拒绝 cookies(必要的 cookies 除外)。

管理同意声明

永久启用
必要的 Cookie

这些 Cookie 是必不可少的,以便让您在浏览网站并使用其功能上有更好地体验,例如设置您的隐私偏好、登录或填写窗体。

分析 Cookie

这些也被称为「统计cookie」,用于收集您使用网站的信息,例如您访问了哪些页面以及点击了哪些连结。查看详细信息