제품 액정 디스플레이 COG LCD WO12864N

128x64 ST7567 COG 액정 LCD (Chip on Glass LCD)

모델 번호 WO12864N

►128*64 COG 디스플레이 모듈
►유형 : 그래픽
►구조 : COG
►크기 : 2.82 인치
►128x64 점 행렬
►IC: ST7567
►3V 전원 공급 장치
►1/65 듀티 사이클
►인터페이스 : 6800/8080/SPI

도면

128x64 ST7567 Chip on Glass LCD Module - WO12864N

사양

인터페이스 핀 기능

Pin 기호 설명
1 CSB Chip select input pin.Interface access is enabled when CSB is “L”,When CSB is non-active(CSB=”H”),D[7:0] pins are high impedance.
2 RSTB Hardware reset input pin. When RSTB is “L”, interna initialization is executed and the internal registers will be initialized.
3 A0 It determines whether the access is related to data or command. A0=“H” : Indicates that signals on D[7:0] are display data.
A0=“L” : Indicates that signals on D[7:0] are command
4 RWR Read/Write execution control pin. When PSB is “H”,
RWR is not used in serial interface and should fix to “H” by VDD1 or VDDH.
5 ERD Read/Write execution control pin. When PSB is “H”,
ERD is not used in serial interface and should fix to “H” by VDD1 or VDDH.
6 D0 When using 8-bit parallel interface: (6800 or 8080 mode)
8-bit bi-directional data bus. Connect to the data bus of 8-bit microprocessor. When CSB is non-active (CSB=“H”), D[7:0] pins are high impedance.
7 D1
8 D2
9 D3
10 D4
11 D5
12 D6
13 D7
14 VDD Power supply
15 Vss Ground
16-19 NC Not connect.
20 V0 V0 is the LCD driving voltage for common circuits at negative frame.
21 XV0 XV0 is the LCD driving voltage for common circuits at positive frame.
22 VG VG is the LCD driving voltage for segment circuits.
23-27 NC Not connect.
28 C86 C86 selects the microprocessor type in parallel interface mode.
29 PSB PSB selects the interface type: Serial or Parallel.
30 NC Not connect.

일반 사양

항목 치수 단위
도트 매트릭스 (해상도) 128 x 64
모듈 치수 89.7 x 49.8 x 6.0 mm
보기 영역 69.0 x 36.5 mm
활성 영역 63.97 x 31.97 mm
도트 크기 0.47 x 0.47 mm
도트 피치 0.5 x 0.5 mm
듀티 1/65 , 1/9 Bias
역광 타입 LED
IC ST7567
인터페이스 6800/8080/4-Line SPI

절대 최대 정격값

항목 기호 최소값 대표값 최대값 단위
작동 온도 TOP -20 +70
보관 온도 TST -30 +80
Input Voltage VI -0.3 VDD+0.3 V
Digital Power Supply Voltage VDD-Vss -0.3 3.6 V
LCD Power supply voltage V0-XV0 -0.3 16 V

전기적 특성

항목 기호 조건 최소값 대표값 최대값 단위
Supply Voltage For Logic VDD-VSS 2.8 3.0 3.2 V
Supply Voltage For LCD VOP Ta=-20℃
Ta=25℃
Ta=70℃

9.3

9.5

9.7
V
V
V
Input High Volt. VIH 0.7 VDD VDD V
Input Low Volt. VIL Vss 0.3VDD V
Output High Volt. VOH 0.8 VDD VDD V
Output Low Volt. VOL Vss 0.2VDD V
Supply Current IDD VDD=3.0V 0.7 1.0 mA
 

Search Keyword: lcd 128x64, lcd 128 x 64, 128x64 lcd, 128 x 64 lcd

최근에 열어 본 항목

go top
close

우리는 귀하의 프라이버시를 소중히 여깁니다

"모든 쿠키 허용"을 클릭하면 사이트 탐색을 개선하고, 사이트 사용을 분석하며, 마케팅 및 성능 노력에 도움을 주기 위해 쿠키를 귀하의 장치에 저장하는 데 동의한 것으로 간주됩니다. 이 주제에 대한 추가 정보는 당사의 정책에서 확인할 수 있습니다. 개인정보 보호정책

우리는 귀하의 프라이버시를 소중히 여깁니다

Winstar와 일부 제3자는 www.winstar.com.tw에서 쿠키를 사용합니다. 쿠키의 종류, 목적 및 관련된 제3자에 대한 자세한 내용은 아래 및 당사의 쿠키 정책에 설명되어 있습니다. 웹사이트에서 최상의 경험을 얻으려면 "모두 허용"을 클릭하여 당사의 쿠키 사용에 동의해 주세요. 또한 선호 설정을 하거나 필수 쿠키를 제외한 쿠키를 거부할 수도 있습니다.

동의 설정 관리

항상 활성화
필수 쿠키

이 쿠키는 웹사이트를 탐색하고 개인 정보 설정, 로그인 또는 양식 작성과 같은 기능을 사용할 수 있도록 하는 데 필수적입니다.

분석 쿠키

“통계 쿠키”라고도 알려진 이러한 쿠키는 웹사이트 사용에 대한 정보를 수집합니다. 예를 들어 어떤 페이지를 방문했는지, 어떤 링크를 클릭했는지와 같은 정보입니다. 자세한 내용을 확인하세요.