首页 产品介绍 COG液晶模块 WO24064B

240x64 COG图形点矩阵显示器

型号 WO24064B

►COG LCD显示模块
►图形点阵
►240x64点阵
►IC: ST7586S
►3.3V电源电压
►1/64 duty cycle
►接口:6800/8080/SPI

产品叙述

华凌型号WO24064B系列是一款结构为COG LCD液晶模块由240x64点所组成显示画面,外观尺寸为142.5×51.7 mm, 有效区域(AA)尺寸为127.17×33.89 mm。WO24064B内置ST7586S IC,此型号系列模块支持多种接口,可选择6800、8080、4线或3线SPI 传输接口,WO24064B的工作温度是-20℃至+70℃,储存温度为-30℃至+80℃。此系列适合运用医疗中心设备、工控设备、家电设备。像是在重症监护室(ICU)这样的医疗环境中,LCD显示模块(液晶显示器)的应用是非常普遍的。COG(Chip-On-Glass)结构指的是芯片安装在玻璃上的技术,这种技术通常用于制造更轻薄、更轻巧、更高可靠性的显示模块。一个 240x64 点的液晶显示器模块可以提供相当清晰的图像,这在医疗设备中非常重要,因为医护人员需要清晰准确的信息来帮助他们作出关键的治疗决策。

这些显示器模块通常用于显示各种数据,例如:

  • 患者监测数据: 液晶显示器可以显示患者的生命体征,包括心率、血压、呼吸频率等,这些数据对医护人员来说至关重要。
  • 治疗计划: 它可以用于显示患者的治疗计划,包括药物剂量、治疗时间表等,这可以帮助医护人员确保他们按照计划提供适当的治疗。
  • 设备监控: 除了患者数据外,液晶显示器还可以用于监控医疗设备的状态,例如监测医疗设备的运行情况、温度、压力等重要参数。
 

在 ICU 等关键的医疗环境中,这些显示器模块的可靠性和准确性至关重要,因为任何不正确的数据或信息都可能对患者的治疗产生严重的影响。因此,COG 结构的 LCD 显示模块在提供清晰、可靠且准确的信息方面是至关重要的。

依设备需求LCD模块外观尺寸分为三个型号系列可选 WO24064B, WO24064C, WO24064D。
模块尺寸 :
WO24064B : 142.5×51.7 mm
WO24064C : 111.4×45.5 mm
WO24064D : 86.2×39.3 mm

规格图

COG Display LCD 240x64 - Winstar WO24064B
Data source ref:WO24064B-TFH#

产品规格

Pin功能定义

Pin No. 符号 Level 说明
1 VG P VG is the power of SEG-drivers.
2 XV0 P Negative operating voltage of COM-drivers.
3 V0 P Positive operating voltage of COM-drivers.
V0O is the output of the positive Vop generator.
V0I is the positive Vop supply of LCD drivers.
V0S is the sensor of the positive Vop generator.
V0O, V0I & V0S should be separated on ITO and be connected together by FPC.
4 VM P VM is the non-select voltage level of COM-drivers.
5 VDDA P Analog power for internal booster.  
6 VSS P Ground
7 VD1 P VD1I is the power source of digital circuits.
8 VDDI P Power of interface I/O circuit.
9 CSB Input Chip select input pin.
CSB=“L”: This chip is selected and the MPU interface is active.
CSB=“H”: This chip is not selected and the MPU interface is disabled (D[7:0] are high impedance).
10 IF3 Input These pins select interface operation mode.
IF3 IF2 IF1 MPU interface type
H H L 80 series 8-bit parallel
H L L 68 series 8-bit parallel
L H H 8-bit serial (4-Line)
L H L 9-bit serial (3-Line)
Note: Refer to “Interface Selection” for detailed information.
11 IF2
12 IF1
13 RSTB Input Reset input pin. When RSTB is “L”, internal initialization procedure is executed.
14 /RD(E) Input Read / Write execution control pin. (This pin is only used in parallel interface)
15 D7 I/O The bi-directional data bus of the MPU interface. When CSB is “H”, they are high impedance.
If using serial interface:
D0 is the SDA signal in 4-Line & 3-Line interface.
D1 is the A0 signal in 4-Line interface
16 D6
17 D5
18 D4
19 D3
20 D2
21 D1
22 D0
23 NC   No connection
24 /WR(R/W) Input Read / Write execution control pin. (This pin is only used in parallel interface)
25 A0(SCL) Input The function of this pin is different in parallel and serial interface.
In parallel interface: A0 is register selection input.
A0 = "H": inputs on data bus are display data;
A0 = "L": inputs on data bus are command.
_ In serial interface: this pad will be used as SCL (serial-clock) input
26 VSS P Ground

规格说明

项目 标准尺寸 单位
点阵(分辨率) 240 x 64
模块尺寸 142.5 x 51.7 x 6.1 mm
检视区域 129.0 x 37.6 mm
有效区域 127.7 x 33.89 mm
点大小 0.5 x 0.5 mm
点间距 0.53 x 0.53 mm
驱动方式 1/64
背光类型 LED
IC ST7586S-G4
接口 6800/8080/3-Line/4-Line

最大绝对额定值

项目 符号 最小值 典型值 最大值 单位
工作温度 TOP -20 +70
储存温度 TST -30 +80
数位电源电压 VDDI -0.3 3.6 V
类比电源电压 VDDA -0.3 3.6 V
LCD供电电压 V0-XV0 -0.3 19 V
LCD供电电压 VG -0.3 5.5 V

电气特性

项目 符号 条件 最小值 典型值 最大值 单位
逻辑电源电压 VDD-VSS 3.0 3.3 3.4 V
LCM电源电压 XV0-V0 Ta=-20℃
Ta=25℃
Ta=70℃

9.8

10.0

10.2
V
V
V
输入高电压 VIH 0.7 VDD VDD V
输入低电压 VIL VSS 0.3VDD V
输出高电压 VOH 0.8VDD VDD V
输出低电压 VOL VSS 0.2VDD V
供电电流(不包括LED背光) IDD VDD=3.3V 1.5 mA

Search Keyword: lcd 240x64, lcd 240 x 64, 240x64 lcd, 240 x 64 lcd
go top
close