我们重视您的隐私
通过点击「允许所有 Cookie」,代表您同意在您的设备上存储 Cookie 以增强网站浏览体验、分析网站使用情况并协助我们的营销和网站效能优化工作。您可以在我们的隐私权政策中找到有关于此的更多信息。
WF70A8TYAHLNL0 是一款 7寸 TFT 液晶模块,采用 Hover-Touch 悬浮电容触控面板,提供非接触式用户互动接口体验。此模块具有 1024x600 像素的分辨率,内建 ST5021 和 ST5651 驱动 IC。支持 LVDS 接口,对比度为 800:1(典型值),亮度为 450 nits (典型值),16:9长宽比呈现鲜明的视觉效果。防眩光玻璃表面和全透液晶类型增强了显示清晰度。
此 TFT 模块采用 IPS 显示技术,确保左:85°/ 右:85°/ 上:85°/ 下:85° 的更宽广的视角。值得注意的是,它采用了投影电容触控面板(PCAP),具有旋浮式无接触式互动屏幕技术,支持 I2C 接口并支持5点触控功能。更多关于悬浮触控技术的详情,请参阅华陵网站上的技术文章。连结:显示触控黑科技 - 悬浮触控 (Hover Touch)。
供电电压(VDD)范围为 3.0V 到 3.6V,典型值为 3.3V。工作温度范围为 -20℃ ~ +70℃,而储存温度范围为 -30℃ ~ +80℃。若客户需要电阻式触控(RTP)功能,请参考 WF70A8TYAHLNT0 型号。
项目 | 规格 | 单位 |
---|---|---|
尺寸(对角线) | 7 | 寸 |
点阵(分辨率) | 1024 × RGB × 600(TFT) | dots |
模块尺寸 | 169.9(W) × 103.4(H) × 8.0(D) | mm |
有效区域 | 154.2144 × 85.92 | mm |
点间距 | 0.1506 × 0.1432 | mm |
LCD类型 | TFT 全透 | |
TFT 接口 | LVDS | |
视角 | 85/85/85/85 | |
长宽比 | 16:9 | |
TFT 驱动 IC | ST5021 + ST5651或相容IC | |
背光类型 | LED, 平常白 | |
PCAP IC | N/A 或相容IC | |
PCAP 接口 | I2C | |
PCAP FW 版本 | 1024*600 | |
支援指数 | 支援五指触控 悬浮支援单指;悬浮高度为10mm |
|
PCAP 有效区域 | 145.22*77.19 mm | |
触控面板 | 投射电容式触控面板 | |
表面 | 亮面 |
项目 | 符号 | 最小值 | 典型值 | 最大值 | 单位 |
---|---|---|---|---|---|
工作温度 | TOP | -20 | - | +70 | ℃ |
储存温度 | TST | -30 | - | +80 | ℃ |
项目 | 符号 | 标准值 | 单位 | ||
---|---|---|---|---|---|
最小值 | 典型值 | 最大值 | |||
电源电压 | VDD | 3.0 | 3.3 | 3.6 | V |
PCAP 电源电压 | VDDT | 3.0 | 3.3 | 3.6 | V |
ICTP | - | TBD | TBD | mA | |
模拟电源电压 | AVDD | 8.9 | 9.0 | 9.1 | V |
TFT Gate ON 电压 | VGH | 17 | 18 | 19 | V |
TFT Gate OFF 电压 | VGL | -6.5 | -6.0 | -5.5 | V |
TFT Common 电压 | Vcom | 3.0 | 3.15 | 3.3 | V |
驱动电流 | IDD | - | 14 | 21 | mA |
电源电流 | IAVDD | - | 25 | - | mA |
TFT Gate ON 电流 | IVGH | - | 1 | - | mA |
TFT Gate OFF 电流 | IVGL | - | 1 | - | mA |
TFT Common 电流 | IVCOM | - | 1 | - | mA |
Pin No. | 符号 | I/O | 功能说明 |
---|---|---|---|
1 | VCOM | P | Common Voltage |
2 | VDD | P | Digital circuit |
3 | VDD | P | Digital circuit |
4 | NC | --- | No connection |
5 | RESET | I | Global reset pin |
6 | STBYB | I | Standby mode, Normally pulled high STBYB = “1”, normal operation STBYB = “0”, timing controller, source driver will turn off, all output are High-Z |
7 | GND | P | Ground |
8 | RXIN0- | I | Negative LVDS differential data input |
9 | RXIN0+ | I | Positive LVDS differential data input |
10 | GND | P | Ground |
11 | RXIN1- | I | Negative LVDS differential data input |
12 | RXIN1+ | I | Positive LVDS differential data input |
13 | GND | P | Ground |
14 | RXIN2- | I | Negative LVDS differential data input |
15 | RXIN2+ | I | Positive LVDS differential data input |
16 | GND | P | Ground |
17 | RXCLKIN- | I | Negative LVDS differential clock input |
18 | RXCLKIN+ | I | Positive LVDS differential clock input |
19 | GND | P | Ground |
20 | RXIN3- | I | Negative LVDS differential data input |
21 | RXIN3+ | I | Positive LVDS differential data input |
22 | GND | P | Ground |
23 | NC | --- | No connection |
24 | NC | --- | No connection |
25 | GND | P | Ground |
26 | NC | --- | No connection |
27 | NC | --- | No connection |
28 | SELB | I | 6bit/8bit mode select H:6bit / L:8bit |
29 | AVDD | P | Power for Analog Circuit |
30 | GND | P | Ground |
31 | LED- | P | LED Cathode |
32 | LED- | P | LED Cathode |
33 | L/R | I | Horizontal inversion |
34 | U/D | I | Vertical inversion |
35 | VGL | P | Negative power for TFT |
36 | NC | --- | No connection |
37 | NC | --- | No connection |
38 | VGH | P | Positive power for TFT |
39 | LED+ | P | LED Anode |
40 | LED+ | P | LED Anode |
Pin | 符号 | 功能说明 |
---|---|---|
1 | VSS | Ground for analog circuit |
2 | VDDT | Power Supply : +3.3V |
3 | SCL | I2C clock input |
4 | NC | No connect |
5 | SDA | I2C data input and output |
6 | NC | No connect |
7 | /RST | External Reset, Low is active |
8 | NC | No connect |
9 | /INT | External interrupt to the host |
10 | VSS | Ground for analog circuit |
通过点击「允许所有 Cookie」,代表您同意在您的设备上存储 Cookie 以增强网站浏览体验、分析网站使用情况并协助我们的营销和网站效能优化工作。您可以在我们的隐私权政策中找到有关于此的更多信息。