Home Prodotti Display OLED Display OLED Grafici WEA012832P

1.71" COG+PCB Display OLED Grafici,128x32

Modello numero WEA012832P

►Tipo: grafico
►Struttura: COG+PCB
►Dimensione: 1.71 pollici
►128x32 a matrice di punti
►IC:CH1115
►Alimentatore 3V
►1/32 duty
►Interfaccia: 4-Wire SPI
►Colore display: Bianco / Giallo

DISEGNO

1.71 inch Graphic OLED Display Module 128x32 (COG+PCB) - WEA012832P
Data source ref: WEA012832PLAP3N00000

SPECIFICHE TECNICHE

Funzione dei Pin di Interfaccia

No. Simbolo Funzione
1 GND Ground.
2 VCC Power supply pin for logic.
3 D0 When the serial interface is selected, then D0 serves as the serial clock input pad (SCL) and D1 serves as the serial data input pad (SI).
4 D1
5 RES# This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed. Keep this pin HIGH (i.e. connect to VDD) during normal operation.
6 D/C# This is the Data/Command control pad that determines whether the data bits are data or a command.
D/C = "H": the inputs at D0 and D1 are treated as display data.
D/C = "L": the inputs at D0 and D1 are transferred to the command registers.
7 CS# This pin is the chip select input. (active LOW)

Dati meccanici

Articolo Dimensioni Unità
A matrice di punti 128 x 32
Dimensione del modulo 60.0 × 18.75 × 5.96(MAX) mm
Area attiva 42.22 × 10.54 mm
Dimensioni del Dot 0.308 × 0.308 mm
Passo del Dot 0.33 × 0.33 mm
Modalità display Matrice passiva
Colore display Monocromatici
Drive Duty 1/32 Duty
IC CH1115
Interfaccia 4-Wire SPI
Dimensioni 1.71 pollici

Valori massimi assoluti

Parameter Simbolo Valore Min Valore massimo Unità
Supply Voltage for Logic VCC -0.3 3.6 V
Temperatura di lavoro TOP -40 +80 °C
Temperatura di stock TSTG -40 +85 °C

Caratteristiche elettriche

DC Caratteristiche elettriche

Articolo Simbolo Condizione Valore Min Valore tipico Valore massimo Unità
Supply Voltage for Logic VCC 1.8 3.0 3.3 V
High Level Input VIH 0.8×VCC VCC V
Low Level Input VIL GND 0.2×VCC V
High Level Output VOH 0.8×VCC VCC V
Low Level Output VOL GND 0.2×VCC V
Display 50% Pixel on ICC VCC =3V - 40 30 mA
go top
close