Accueil Produits Module OLED Afficheur OLED graphique WEA128128G

1.12 pouces Modules OLED 128x128 COG+PCB (SH1107)

N° de modèle WEA128128G

►Type: Graphique
►Structure: COG+PCB
►Dimension: 1.12 pouces
►Matrice de points 128 x 128
►IC:SH1107
►Alimentation 3V
►1/128 duty
►Interface: SPI
►Couleur d'affichage: Blanc / Jaune

Description

 

DESSIN

1.12 inch 128x128 Graphic OLED Module (COG+PCB Version) - WEA128128G

Data source ref: WEA128128GWAP3N00000

SPÉCIFICATIONS

Fonction PIN sur l'interface

No. Symbole Description
1 GND Ground
2 VCC Power supply for logic and input.
3 D0 The serial clock input pad.
4 D1 The serial data input pad.
5 RES# This is a reset signal input pad. When RES is set to “L”, the settings are initialized. The reset operation is performed by the RES signal level.
6 D/C# This is the Data/Command control pad that determines whether the data bits are data or a command.
7 CS# This pad is the chip select input.

Données mécaniques

Article Dimension Unité
Matrice de points 128 x 128 Dots
Dimensions du module 26.4 x 38.6 x 5.21 Max. mm
Zone active 20.076 x 20.076 mm
Taille des points 0.137 x 0.137 mm
Pas des points 0.157 x 0.157 mm
Mode d'affichage Matrice passive
Couleur d'affichage Monochrome
Drive Duty 1/128 Duty
Gray Scale 4 bits
IC SH1107
Interface 4-Wire SPI
Diagonale 1.12 pouces

Valeurs nominales maximales absolues

Parameter Symbole min. max. Unité
Supply Voltage for Logic VCC 0 7 V
Température de fonctionnement TOP -40 +80 °C
Température de stockage TSTG -40 +85 °C

Caractéristiques électroniques

Article Symbole État min. typ. max. Unité
Supply Voltage for Logic VCC 2.0 3.0 3.3 V
Input High Volt. VIH 0.8×VCC VCC V
Input Low Volt. VIL 0 0.2×VCC V
Output High Volt. VOH 0.8×VCC VCC V
Output Low Volt. VOL 0 0.2×VCC V
Display 50% Pixel on ICC VCC=3V 65 97.5 mA

Search keyword: 128x128 oled, oled 128x128, 1.12 oled, 1.12" oled, 1.12 pouces oled, oled 1.12 pouces, oled 1.12"

go top
close