Home Prodotti Display OLED Display OLED Grafici WEA128128G

1.12 pollici Moduli OLED 128x128 COG+PCB (SH1107)

Modello numero WEA128128G

►Tipo: grafico
►Struttura: COG+PCB
►Dimensione: 1.12 pollici
►128 x 128 a matrice di punti
►IC:SH1107
►Alimentatore 3V
►1/128 duty
►Interfaccia: SPI
►Colore display: Bianco / Giallo

Descrizione

 

DISEGNO

1.12 inch 128x128 Graphic OLED Module (COG+PCB Version) - WEA128128G

Data source ref: WEA128128GWAP3N00000

SPECIFICHE TECNICHE

Funzione dei Pin di Interfaccia

No. Simbolo Funzione
1 GND Ground
2 VCC Power supply for logic and input.
3 D0 The serial clock input pad.
4 D1 The serial data input pad.
5 RES# This is a reset signal input pad. When RES is set to “L”, the settings are initialized. The reset operation is performed by the RES signal level.
6 D/C# This is the Data/Command control pad that determines whether the data bits are data or a command.
7 CS# This pad is the chip select input.

Specifiche generali

Articolo Dimensioni Unità
A matrice di punti 128 x 128 Dots
Dimensione del modulo 26.4 x 38.6 x 5.21 Max. mm
Area attiva 20.076 x 20.076 mm
Dimensioni del Dot 0.137 x 0.137 mm
Passo del Dot 0.157 x 0.157 mm
Modalità display Matrice passiva
Colore display monocromatici
Drive Duty 1/128 Duty
Gray Scale 4 bits
IC SH1107
Interfaccia 4-Wire SPI
Dimensione (Diagonale) 1.12 pollici

Valori massimi assoluti

Parameter Simbolo Valore Min Valore massimo Unità
Supply Voltage for Logic VCC 0 7 V
Temperatura di lavoro TOP -40 +80 °C
Temperatura di stock TSTG -40 +85 °C

Caratteristiche elettriche

Articolo Simbolo Condizione Valore Min Valore tipico Valore massimo Unità
Supply Voltage for Logic VCC 2.0 3.0 3.3 V
Input High Volt. VIH 0.8×VCC VCC V
Input Low Volt. VIL 0 0.2×VCC V
Output High Volt. VOH 0.8×VCC VCC V
Output Low Volt. VOL 0 0.2×VCC V
Display 50% Pixel on ICC VCC=3V 65 97.5 mA
 

Search keyword: 128x128 oled, oled 128x128, 1.12 oled, 1.12" oled, 1.12 pollici oled, oled 1.12 pollici, oled 1.12"

go top
close