N° de modèle WEA012832D
►Type: Graphique
►Structure: COG+PCB
►Dimension: 0.91 pouces
►Matrice de points 128x32
►IC:SSD1306
►Alimentation 3V
►1/32 duty
►Interface: SPI
►Couleur d'affichage: Blanc / Jaune / Bleu ciel
Description
DESSIN
Data source ref: WEA012832DWPP3N00001
SPÉCIFICATIONS
Fonction PIN sur l'interface
No. | Symbole | Fonction |
---|---|---|
1 | SDA | When serial mode is selected, D1 will be the serial data input SDIN and D0 will be the serial clock input SCLK. |
2 | SCL | |
3 | DC | Data/Command Control This pin is Data/Command control pin.. When the pin is pulled high and serial interface mode is selected, the data at SDIN is treated as data. When it is pulled low, the data at SDIN will be transferred to the command register. |
4 | RST | This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed. Keep this pin HIGH (i.e. connect to VDD) during normal operation. |
5 | CS | This pin is the chip select input. (active LOW). |
6 | VDD | 2.8 ~ 3.3V Power supply pin for core logic operation. |
7 | VIN | 4.8 ~ 5.2V Power supply pin for core logic operation. |
8 | GND | This is a ground pin. |
Données mécaniques
Article | Dimensions | Unité |
---|---|---|
Matrice de points (Résolution) | 128 x 32 | Dots |
Dimensions du module | 32.5 × 20.5 × 2.41 | mm |
Zone active | 22.384 × 5.584 | mm |
Taille des points | 0.152 × 0.152 | mm |
Pas des points | 0.175 × 0.175 | mm |
Mode d'affichage | Matrice passive | |
Couleur d'affichage | Monochrome | |
Drive Duty | 1/32Duty | |
IC | SSD1306BZ | |
Interface | SPI | |
Diagonale | 0.91 pouces |
Valeurs nominales maximales absolues
Parameter | Symbole | Valeur min | Valeur max | Unité |
---|---|---|---|---|
Supply Voltage for Logic | VDD | 1.65 | 3.3 | V |
Supply Voltage for Logic | VIN | 4.0 | 6.0 | V |
Température de fonctionnement | TOP | -40 | +80 | °C |
Température de stockage | TSTG | -40 | +85 | °C |
Caractéristiques électroniques
Article | Symbole | État | Valeur min | Valeur type | Valeur max | Unité |
---|---|---|---|---|---|---|
Supply Voltage for Logic (3V) | VDD | - | 2.8 | 3.0 | 3.3 | V |
Supply Voltage for Logic (5V) | VIN | - | 4.8 | 5.0 | 5.2 | V |
Input High Volt. | VIH | - | 0.8×VDD | - | VDD | V |
Input Low Volt. | VIL | - | 0 | - | 0.2×VDD | V |
Output High Volt. | VOH | - | 0.9×VDD | - | VDD | V |
Output Low Volt. | VOL | - | 0 | - | 0.1×VDD | V |
50% Check Board operating Current | ICC | VDD=3V | - | 13.0 | 26.0 | mA |