首页 产品介绍 TFT 液晶模块 高亮TFT显示器 WF40ESWAA6DNG0

电容触控 4寸 480x480 高亮 广温 方形 TFT 液晶显示屏, 方形 TFT 模块

型号 WF40ESWAA6DNG0

►尺寸: 4寸
►分辨率:480x480 dots
►视角: IPS
►接口: RGB
►驱动IC: ST7701S
►控制板 : 无
►亮度(cd/m²): 1000
►铁框螺丝孔: 无
►触控面板:电容式触控面板 (PCAP)
►支援指数: 5指
►工作温度:-30~+80°C(广温)

规格图

Square LCD Display, Square LCD Panel, Square TFT Display with PCAP - WF40ESWAA6DNG0

产品规格

Pin功能定义

LCM PIN 定义

Pin 符号 功能说明
1 VLED- Power for LED backlight cathode
2 VLED+ Power for LED backlight anode
3 GND Power ground
4 VCC Power supply
5 R0 Data bus
6 R1
7 R2
8 R3
9 R4
10 R5
11 R6
12 R7
13 G0 Data bus
14 G1
15 G2
16 G3
17 G4
18 G5
19 G6
20 G7
21 B0 Data bus
22 B1
23 B2
24 B3
25 B4
26 B5
27 B6
28 B7
29 SCL SCL: Serial clock input for SPI interface.
30 PCLK Dot clock signal for RGB interface operation
31 CS - A chip select signal
Low: the chip is selected and accessible
High: the chip is not selected and not accessible
32 HSYNC Line synchronizing signal for RGB interface operation  
33 VSYNC Frame synchronizing signal for RGB interface operation
34 DE Data enable signal for RGB interface operation
Low: access enabled
High: access inhibited
35 SDA SDA: Serial data input/output bidirectional pin for SPI Interface.
36 RESET - The external reset input
- Initializes the chip with a low input. Be sure to execute a power-on reset after supplying power.
37-40 NC No connect
 

PCAP PIN 定义

Pin 符号 功能说明
1 VSS Ground for analog circuit
2 VDDT Power Supply : +3.0V
3 SCL I2C clock input
4 NC No connect
5 SDA I2C data input and output
6 NC No connect
7 /RST External Reset, Low is active
8 NC No connect
9 /INT External interrupt to the host
10 VSS Ground for analog circuit
 

规格说明

项目 规格 单位
显示尺寸(对角线) 4.0
点阵(分辨率) 480 × 3(RGB) × 480 dots
模块尺寸 78.8(H) × 82.95 (W) × 7.17 mm
有效区域 71.856(H) × 70.176 (V) mm
点间距 0.1497(H) × 0.1462(V) mm
LCD类型 IPS TFT 全透
视角 80/80/80/80
长宽比 1:1
接口 24-bit RGB
驱动IC ST7701S或相容IC
背光类型 LED, 平常白
PCAP IC ST1633I或相容IC
PCAP接口 I2C
PCAP FW版本 V01
触控面板类型 PCAP电容式触控面板
表面 防眩光

最大绝对额定值

项目 符号 最小值 典型值 最大值 单位
工作温度 TOP -30 +80
储存温度 TST -30 +80

电气特性

典型操作条件

项目 符号 单位
最小值 典型值 最大值
接口供电电压 VCC 2.5 2.8 3.6 V
驱动电流(白) IVCC - 27 40.5 mA
PCAP电源电压 VDDT 2.8 - 3.3 V
ICTP(mA) - 12.4 18.6 mA
go top
close