Home Produtos LCD TFT Display TFT Alto Brilho WF123BSWAYLNBA

Tela TFT IPS de Tela Capacitivo alto Brilho Toque de 12,3", 1920x720, LVDS

Model No. WF123BSWAYLNBA

►Tamanho: 12,3 polegadas
►Resolução: 1920x720 pontos
►Direção de exibição: 85/85/85/85 (IPS)
►Interface: 2ch-LVDS
►Driver IC :HX8298-C01-LT+HX8695-E-LT
►Placa de controle: Não
►Brilho(cd/m²): 650
►Quadro com furo passante: Não
►Tela de toque: Com painel de toque capacitivo (PCAP)
►Detect Point : 10 Fingers
►Temperatura de operação: -30~+85℃ (TFT de temperature estendida)

DRAWING

1920x720 IPS TFT Display 12.3 with Capacitive Touch - WF123BSWAYLNBA

SPECIFICATIONS

Função do pino de interface

TFT LCD Module

FPC connector is used for electronics interface.
AORORA F31L-1A7H1-21050 , 50PIN

Pin no. Símbolo Função
1 GND Ground
2 NC No connector
3 VCC Digital Power
4 VCC Digital Power
5 GND Panel Power
6 GND Panel Power
7 NC No connector
8 NC No connector
9 GND Ground
10 ORXIN0- Odd pixel negative LVDS differential clock input
11 ORXIN0+ Odd pixel positive LVDS differential clock input
12 ORXIN1- Odd pixel negative LVDS differential clock input
13 ORXIN1+ Odd pixel positive LVDS differential clock input
14 ORXIN2- Odd pixel negative LVDS differential clock input
15 ORXIN2+ Odd pixel positive LVDS differential clock input
16 ORXCLKIN- Odd pixel negative LVDS differential clock input
17 ORXCLKIN+ Odd pixel positive LVDS differential clock input
18 ORXIN3- Odd pixel negative LVDS differential clock input
19 ORXIN3+ Odd pixel positive LVDS differential clock input
20 ERXIN0- Even pixel negative LVDS differential clock input
21 ERXIN0+ Even pixel positive LVDS differential clock input
22 ERXIN1- Even pixel negative LVDS differential clock input
23 ERXIN1+ Even pixel positive LVDS differential clock input
24 ERXIN2- Even pixel negative LVDS differential clock input
25 ERXIN2+ Even pixel positive LVDS differential clock input
26 ERXCLKIN- Even pixel negative LVDS differential clock input
27 ERXCLKIN+ Even pixel positive LVDS differential clock input
28 ERXIN3- Even pixel negative LVDS differential clock input
29 ERXIN3+ Even pixel positive LVDS differential clock input
30 GND Ground
31 NC No connector
32 RESETB Global reset pin, active low.
33 STBYB Standby mode, active low.
34 CA3 Output signal to indicate self protection mode, when DE,HS,VS,DCLK, any of these signals is missing, it will become High. If using this pin, CA3 need to pulled low by an resistor,else , let it floating.
35 SCL Serial interface clock input. (User folating)
36 SDA Serial interface data input/output.(User folating)
37 CSB Serial interface chip enable.(User folating)
38 GND Power Ground
39 GND Power Ground
40 NC No connector
41 LEDA LED power (Anode)
42 LEDA LED power (Anode)
43 LEDA LED power (Anode)
44 NC No connector
45 LEDK1 Cathode 1
46 LEDK2 Cathode 2
47 LEDK3 Cathode 3
48 LEDK4 Cathode 4
49 NTC_A NTC_Anode
50 NTC_K NTC_Cathode
 

PCAP PIN Definition

Pin Símbolo Função
1 USB_VSS System ground
2 USB_VDD 5V Power supply
3 USB_D+ Data +
4 USB_D- Data -
5 VSS System ground
6 SDA I2C data input and output
7 SCL I2C clock input
8 RST External Reset, Low is active
9 INT External interrupt to the host
10 VDDT 3.3 Power supply

Especificações Gerais

Item Dimensão Unidade
Tamanho 12,3 polegadas
Matriz de pontos 1920 RGB (H) × 720(V) pontos
Dimensão do módulo 364.0(H) × 175.0 (V) × 10.7 mm
Área ativa 292.032(H) × 109.512(V) mm
Distância entre pontos 0.1521(H) × 0.1521 (V) mm
Tipo LCD TFT, Preto, Transmissivo
Driver IC HX8298-C01-LT+HX8695-E-LT ou equivalente
Direção de exibição 85/85/85/85
Tipo de luz de fundo LED, Branco
TFT Interface 2ch-LVDS
PCAP IC ILI2511 ou equivalente
PCAP Interface USB (I2C available)
Versão PCAP FW V6.0.0.0.0.0.0.3
Painel de toque painel de toque capacitivo
Superfície Reflexo

Classificações Máximas Absolutas

Item Símbolo Valor Min Valor Típico Valor Máximo Unidade
Temperatura de operação TOP -30 +85
Temperatura de armazenamento TST -40 +90

Características Eletrônicas

Item Símbolo Valor Min Valor Típico Valor Máximo Unidade
Supply Voltage VCC 3 3.3 3.6 V
Input signal voltage ViH VCC *0.7 - VCC V
ViL 0 - VCC *0.3 V
Current of power supply ICC - - 500 mA
Inrush current IRUSH - - 2.0 A
Supply CTP(USB) USB_VDD 5V 4.75 5.0 5.25 V
I USB_VDD - 90 135 mA
Supply CTP(I2C) VDDT 3.3 3.15 3.3 3.45 V
IVDDT - 90 135 mA
go top
close