Display LCD IPS TFT 1920x720 da 12.3" con pannello touch capacitivo
Modello numero WF123BSWAYLNBA
►Dimensione : 12.3 pollici
►Risoluzione : 1920x720 punti
►Direzione di visione : 85/85/85/85 (IPS)
►Interfaccia : 2ch-LVDS
►Driver IC :HX8298-C01-LT+HX8695-E-LT
►Scheda di controllo: No
►Luminosità(cd/m²): 650
►Cornice di fissaggio: No
►Touch Screen : con pannello touch capacitivo (PCAP)
►Detect Point : 10 Fingers
►Temperatura di funzionamento: -30~+85℃ (Vasta Gamma di Temperature)
DISEGNO
SPECIFICHE TECNICHE
Funzione dei Pin di Interfaccia
TFT LCD Module
FPC connector is used for electronics interface.
AORORA F31L-1A7H1-21050 , 50PIN
Pin no. | Simbolo | Funzione |
---|---|---|
1 | GND | Ground |
2 | NC | No connector |
3 | VCC | Digital Power |
4 | VCC | Digital Power |
5 | GND | Panel Power |
6 | GND | Panel Power |
7 | NC | No connector |
8 | NC | No connector |
9 | GND | Ground |
10 | ORXIN0- | Odd pixel negative LVDS differential clock input |
11 | ORXIN0+ | Odd pixel positive LVDS differential clock input |
12 | ORXIN1- | Odd pixel negative LVDS differential clock input |
13 | ORXIN1+ | Odd pixel positive LVDS differential clock input |
14 | ORXIN2- | Odd pixel negative LVDS differential clock input |
15 | ORXIN2+ | Odd pixel positive LVDS differential clock input |
16 | ORXCLKIN- | Odd pixel negative LVDS differential clock input |
17 | ORXCLKIN+ | Odd pixel positive LVDS differential clock input |
18 | ORXIN3- | Odd pixel negative LVDS differential clock input |
19 | ORXIN3+ | Odd pixel positive LVDS differential clock input |
20 | ERXIN0- | Even pixel negative LVDS differential clock input |
21 | ERXIN0+ | Even pixel positive LVDS differential clock input |
22 | ERXIN1- | Even pixel negative LVDS differential clock input |
23 | ERXIN1+ | Even pixel positive LVDS differential clock input |
24 | ERXIN2- | Even pixel negative LVDS differential clock input |
25 | ERXIN2+ | Even pixel positive LVDS differential clock input |
26 | ERXCLKIN- | Even pixel negative LVDS differential clock input |
27 | ERXCLKIN+ | Even pixel positive LVDS differential clock input |
28 | ERXIN3- | Even pixel negative LVDS differential clock input |
29 | ERXIN3+ | Even pixel positive LVDS differential clock input |
30 | GND | Ground |
31 | NC | No connector |
32 | RESETB | Global reset pin, active low. |
33 | STBYB | Standby mode, active low. |
34 | CA3 | Output signal to indicate self protection mode, when DE,HS,VS,DCLK, any of these signals is missing, it will become High. If using this pin, CA3 need to pulled low by an resistor,else , let it floating. |
35 | SCL | Serial interface clock input. (User folating) |
36 | SDA | Serial interface data input/output.(User folating) |
37 | CSB | Serial interface chip enable.(User folating) |
38 | GND | Power Ground |
39 | GND | Power Ground |
40 | NC | No connector |
41 | LEDA | LED power (Anode) |
42 | LEDA | LED power (Anode) |
43 | LEDA | LED power (Anode) |
44 | NC | No connector |
45 | LEDK1 | Cathode 1 |
46 | LEDK2 | Cathode 2 |
47 | LEDK3 | Cathode 3 |
48 | LEDK4 | Cathode 4 |
49 | NTC_A | NTC_Anode |
50 | NTC_K | NTC_Cathode |
PCAP PIN Definition
Pin | Simbolo | Funzione |
---|---|---|
1 | USB_VSS | System ground |
2 | USB_VDD 5V | Power supply |
3 | USB_D+ | Data + |
4 | USB_D- | Data - |
5 | VSS | System ground |
6 | SDA | I2C data input and output |
7 | SCL | I2C clock input |
8 | RST | External Reset, Low is active |
9 | INT | External interrupt to the host |
10 | VDDT 3.3 | Power supply |
Specifiche generali
Articolo | Dimensioni | Unità |
---|---|---|
Dimensione | 12.3 | pollici |
A matrice di punti | 1920 RGB (H) × 720(V) | pixel |
Dimensione del modulo | 364.0(H) × 175.0 (V) × 10.7 | mm |
Area attiva | 292.032(H) × 109.512(V) | mm |
Dimensioni del Dot | 0.1521(H) × 0.1521 (V) | mm |
Tipo LCD | TFT, Nero, Trasmissivo | |
Driver IC | HX8298-C01-LT+HX8695-E-LT o equivalente | |
Direzione di visione | 85/85/85/85 | |
Tipo di backlight | LED, Bianco | |
TFT Interfaccia | 2ch-LVDS | |
PCAP IC | ILI2511o equivalente | |
PCAP Interfaccia | USB (I2C available) | |
versione PCAP FW | V6.0.0.0.0.0.0.3 | |
Pannello touch | con pannello touch capacitivo, PCAP | |
Superficie | Bagliore (Glare) |
Valori massimi assoluti
Articolo | Simbolo | Valore Min | Valore tipico | Valore massimo | Unità |
---|---|---|---|---|---|
Temperatura di lavoro | TOP | -30 | - | +85 | ℃ |
Temperatura di stock | TST | -40 | - | +90 | ℃ |
Caratteristiche elettriche
Articolo | Simbolo | Valore Min | Valore tipico | Valore massimo | Unità |
---|---|---|---|---|---|
Supply Voltage | VCC | 3 | 3.3 | 3.6 | V |
Input signal voltage | ViH | VCC *0.7 | - | VCC | V |
ViL | 0 | - | VCC *0.3 | V | |
Current of power supply | ICC | - | - | 500 | mA |
Inrush current | IRUSH | - | - | 2.0 | A |
Supply PCAP (USB) | USB_VDD 5V | 4.75 | 5.0 | 5.25 | V |
I USB_VDD | - | 90 | 135 | mA | |
Supply PCAP (I2C) | VDDT 3.3 | 3.15 | 3.3 | 3.45 | V |
IVDDT | - | 90 | 135 | mA |