1.5 인치 COG+PCB OLED 디스플레이 패널 128x128

모델 번호 WEA128128A

►유형 : 그래픽
►구조 : COG+PCB
►크기 : 1.5 인치
►128 x 128 점 행렬
►IC：SSD1327
►3.3V/5V 전원 공급 장치
►1/128 duty
►인터페이스 : SPI,옵션I2C
►디스플레이 색상: 백색 / 노란색
►지원 그레이스케일

이전 목록으로 돌아가기 다음

설명

Data source ref: WEA128128AWAP3N00000

No.	기호	기능
1	GND	This is a ground pin.
2	VCC	Power supply for panel driving voltage. This is also the most positive power voltage supply pin. It is supplied by external high voltage source.
3	D0	These pins are bi-directional data bus connecting to the MCU data bus. Unused pins are recommended to tie LOW. When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN and D2 should be kept NC.
4	D1
5	RES#	This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed. Keep this pin pull HIGH during normal operation.
6	D/C#	This pin is Data/Command control pin connecting to the MCU. When the pin is pulled HIGH, the data at D[7:0] will be interpreted as data. When the pin is pulled LOW, the data at D[7:0] will be transferred to a command register.
7	CS#	This pin is the chip select input connecting to the MCU. The chip is enabled for MCU communication only when CS# is pulled LOW (active LOW).

Parameter	기호	최소값	최대값	단위
Supply Voltage for Logic	VCC	1.65	5.5	V
작동 온도	TOP	-40	+80	°C
보관 온도	TSTG	-40	+85	°C

항목	기호	조건	최소값	대표값	최대값	단위
Supply Voltage for Logic(3V/5V)	VCC	－	2.8	3.3	5.2	V
Input High Volt.	VIH	－	0.8×VCC	－	VCC	V
Input Low Volt.	VIL	－	0	－	0.2×VCC	V
Output High Volt.	VOH	－	0.9×VCC	－	VCC	V
Output Low Volt.	VOL	－	0	－	0.1×VCC	V
50% Check Board operating Current	ICC	VCC=3.3V	－	160	320	mA

Search keyword: 128x128 oled, oled 128x128, 1.5 oled, 1.5" oled, 1.5 인치 oled, oled 1.5 인치, oled 1.5"