WF50FTWAGLNN0 is a 5 inch IPS landscape mode TFT LCD module, with resolution 800x480 pixels. WF50FTWAGLNN0 module is built in with ST7262 driver IC; this module supports LVDS interface (Default VESA), contrast ratio 1,000:1 (typical value), brightness 500 nits (typical value). If customers require RGB interface, please choose WF50FTWAGDNN0.
This 5" IPS TFT has a wider viewing angle than TN TFT, the view angle is Left:80 / Right:80 / Up:80 / Down:80 degree (typical value). The power voltage of WF50F model is from 3.1 to 3.6V, typical value 3.3V, aspect ratio 5:3, normally black, transmissive LCD type, anti-glare surface glass. It can be operating at temperatures from -30℃ to +80℃ and storage temperatures from -30℃ to +80℃. WF50F have Resistive Touch Panel and Projected Capacitive Touch Panel for optional.
SPECIFICATIONS
Interface
Pin |
Symbol |
Function |
1 |
NC |
No connection |
2 |
VCC |
Power voltage |
3 |
VCCI |
Power supply for digital I/O pins. |
4 |
NC |
No connection |
5 |
GRB |
Global reset pin. When GRB is “L”, internal initialization procedure is executed |
6 |
DISP |
Display on/off |
7 |
GND |
Power Ground |
8 |
RXIN0- |
LVDS input lane: RX0-/ RX0+ |
9 |
RXIN0+ |
10 |
GND |
Power Ground |
11 |
RXIN1- |
LVDS input lane: RX1-/ RX1+ |
12 |
RXIN1+ |
13 |
GND |
Power Ground |
14 |
RXIN2- |
LVDS input lane: RX2-/ RX2+ |
15 |
RXIN2+ |
16 |
GND |
Power Ground |
17 |
RXCLKIN- |
LVDS input lane, detail pin define please refer to LVDS
Input Pin Mapping Table. |
18 |
RXCLKIN+ |
19 |
GND |
Power Ground |
20 |
RXIN3- |
LVDS input lane: RX3-/ RX3+ |
21 |
RXIN3+ |
22 |
GND |
Power Ground |
23-24 |
NC |
No connection |
25 |
FMT |
LVDS_FMT sets LVDS data format.
LVDS_FMT |
Function Description |
L |
VESA Mode (Default) |
H |
JEIDA Mode |
LVDS_FMT is not used in RGB interface and should be connected to “L”. |
26-27 |
NC |
No connection |
28 |
SELB |
SELB sets VSYNC polarity in RGB interface and sets LVDS 3- / 4- lane in LVDS interface.
MCU Type |
VDPOL |
Function Description |
RGB interface |
L |
VSYNC polarity: positive |
H |
VSYNC polarity: positive: negative (Default) |
LVDS inteface |
L |
LVD 3 lane |
H |
LVD 4 lane (Default) |
|
29 |
NC |
No connection |
30 |
GND |
Power Ground |
31-32 |
VLED- |
Power for LED backlight (Cathode) |
33 |
L/R |
Horizontal scan direction control pin. This pin must be connected to “H” or “L” according to system application
HDIR |
Function Description |
L |
From right to left |
H |
From left to right (Default) |
|
34 |
U/D |
Vertical scan direction control pin. This pin must be connected to “H” or “L” according to system application.
VDIR |
Function Description |
L |
From down to up. |
H |
From up to down.(Default) |
|
35 |
NC |
No connection |
36-37 |
GND |
Power Ground |
38 |
NC |
No connection |
39-40 |
VLED+ |
Power for LED backlight (Anode) |
General Specifications
Item |
Dimension |
Unit |
Size |
5.0 |
inch |
Dot Matrix |
800× 3(RGB) × 480 |
dots |
Module dimension |
120.7(W) ×75.8(H) ×2.8mm |
mm |
Active area |
108(W) ×64.8 (H) mm |
mm |
Dot pitch |
0.135(W) ×0.135(H) mm |
mm |
LCD type |
TFT, Normally Black, Transmissive |
View Direction |
80/80/80/80 |
Aspect Ratio |
5:3 |
Driver IC |
ST7262 or equivalent |
Interface |
LVDS |
Backlight Type |
LED, Normally White |
Touch Panel |
Without Touch Panel |
Surface |
Anti-Glare |
Absolute Maximum Ratings
Item |
Symbol |
Min |
Typ |
Max |
Unit |
Operating Temperature |
TOP |
-30 |
- |
+80 |
℃ |
Storage Temperature |
TST |
-30 |
- |
+80 |
℃ |
Electrical Characteristics
Typical Operation Conditions
Item |
Symbol |
Values |
Unit |
Min. |
Typ. |
Max. |
Power voltage |
VCC |
3.1 |
3.3 |
3.6 |
V |
Power voltage |
VCCI |
3.1 |
3.3 |
3.6 |
V |
Current for Driver(Black) |
ICC |
- |
67.6 |
102 |
mA |
Search keyword: tft 5", 5 tft lcd, 5" tft lcd, 5 inch tft lcd, tft lcd 5, 5 tft display, 5" tft display, 5 inch tft display, tft display 5, tft display 5"